Re: [Bluez-users] Re: PROBLEM: Apple powerbook, Apple BT keyboard, keyboard does not reconnect on reboot

[Marcel Holtmann <marcel@holtmann.org>]

Hi Matthew,

> > > Finally figured out what is wrong.  There is definitely a Powerpc
> > > problem with the BT HIDPGETCONNLIST ioctl on the powerpc arch.
> > > 
> > > The HID ioctl HIDPGETCONNLIST is not returning any HID device entries
> > > from the kernel on the Powerpc architecture, even when a blue-tooth
> > > keyboard and mouse are working.
> > > 
> > > In Debian's boot scripts hidd --killall  is used to nicely close the
> > > connections so that the devices will reconnect cleanly on next boot. 
> > > This is not working for me as the above ioctl is not returning a list if
> > > addresses to be acted on.
> > > 
> > > Work around for me will be to explicitly kill each device address before
> > > stopping hidd, as hidd --kill <device address> works.  Does this mean
> > > that the devices are registering in the hidp module, but there is a
> > > problem in passing the list back out of the kernel?
> > 
> > does "hidd --show" works?
> 
> Definitely does not work.  The above kernel ioctl appears to be busted
> (or the add HID device stuff is as it is not updating the in kernel HID
> device list).  Read the source code for hidd, comparing against strace
> output for "hidd --show".  hidd is running as the BT dongle is in HCi
> mode, and I am typing this.

and what does /proc/bluetooth/l2cap show you?

> > > Do you have access to a powerpc machine to test this on?  Could you give
> > > me any instructions on getting the hidp.ko module to produce the debug
> > > that would be useful?
> > > 
> > > It would be good to get this one solved, as I would like to look at
> > > shallower bugs which I can knock off myself. First look at the hidp code
> > > with this one freaked me out a bit.
> > 
> > I don't have access to a PowerPC machine. What Apple is this?
> > 
> 
> 2004 Powerbook 15" Al, 1.33GHz G4, 768 MB RAM, built-in Apple bluetooth,
> ATI Radeon video.
> 
> Also occurs on my 450MHz g3 PowerMac, with Logitech BT dongle...
> 
> I could probably give you access and work with you over say IRC or gaim
> in testing this (I have cable with a static IP!), as this is a generic
> powerpc problem, and I can remove sensitive stuff off my G3.

You can enable the DEBUG in the hidp driver or add some printk calls be
yourself to see where the ioctl fails.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users/listinfo/bluez-users