* [Bluez-users] Error messages from hid2hci
@ 2004-12-02 0:39 Scott W Gifford
2004-12-02 6:55 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Scott W Gifford @ 2004-12-02 0:39 UTC (permalink / raw)
To: bluez-users
After upgrading my D-Link DBT-120 with the Apple firmware, I have to
use hid2hci to put it in hci mode. hid2hci usually seems to work
fine, except it prints out an error message:
If I plug the device directly in, I get:
Switching device 0a12:1000 to HCI mode failed (Protocol error)
Through a hub, I get:
Switching device 0a12:1000 to HCI mode failed (Invalid or incomplete multibyte or wide character)
This is with a very recent Bluetooth kernel from BK, bluez-libs-2.10,
and bluez-utils-2.10
----ScottG.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [Bluez-users] Error messages from hid2hci
2004-12-02 0:39 [Bluez-users] Error messages from hid2hci Scott W Gifford
@ 2004-12-02 6:55 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2004-12-02 6:55 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Scott,
> After upgrading my D-Link DBT-120 with the Apple firmware, I have to
> use hid2hci to put it in hci mode. hid2hci usually seems to work
> fine, except it prints out an error message:
>
> If I plug the device directly in, I get:
>
> Switching device 0a12:1000 to HCI mode failed (Protocol error)
>
> Through a hub, I get:
>
> Switching device 0a12:1000 to HCI mode failed (Invalid or incomplete multibyte or wide character)
>
> This is with a very recent Bluetooth kernel from BK, bluez-libs-2.10,
> and bluez-utils-2.10
I think we should not print out certain error codes, because the switch
into HCI will be still succeed. However the error is correct, because
the device resets before the URB is completed.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-12-02 6:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-02 0:39 [Bluez-users] Error messages from hid2hci Scott W Gifford
2004-12-02 6:55 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox