From: Stefan Torkel <nephlim@gmx.de>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Nokia 7610 file transfer to computer
Date: Thu, 09 Dec 2004 12:11:19 +0100 [thread overview]
Message-ID: <1102590679.24852.3.camel@nephlim.homenet> (raw)
In-Reply-To: <1102577073.9988.92.camel@pegasus>
Hi Marcel,
> actually I asked for "hcidump -X" and not "hcidump -x" and it seems that
> the RFCOMM channel assignment of OBEX don't works. Must be because the
> 7610 has a quite crazy way to ask for the OBEX push service record. So
> you should try "hcidump --obex=3 -X".
Here is the output for hcidump --obex=3 -X
HCIDump - HCI packet analyzer ver 1.16
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
0000: c4 0f 15 ed 0e 00 0c 02 50 01 ........P.
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
0000: c4 0f 15 ed 0e 00 01 .......
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 09 04 ....
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 01 00 05 ...
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0043
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 01 00 c4 0f 15 ed 0e 00 01 00 ...........
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 01 00 0f 00 ....
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 01 00 05 ...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 01 00 ......
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
0000: 01 00 18 cc ....
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 0f 04 ....
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
0000: 00 01 00 18 cc .....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 01 00 13 ....
So it still doesn't work. What should I do. I want to get this working.
It's so bad...
> The problem is that we get the ACL data for the SDP L2CAP channel before
> we got the connect complete for the ACL link. You can't send any data
> when your underlaying link is not fully established. What kind of dongle
> are you using (hciconfig -a) and what phone (hcitool info)?
Dongle info:
hci0: Type: USB
BD Address: 00:0B:0D:21:D7:54 ACL MTU: 339:4 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:4898 acl:63 sco:0 events:465 errors:0
TX bytes:3038 acl:52 sco:0 commands:201 errors:0
Features: 0xff 0xff 0x3d 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)...?...'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x93 LMP Ver: 1.1 (0x1) LMP Subver:
0x93
Manufacturer: Transilica, Inc. (24)
And phone?? It's a 7610 you should know... Or what do you mean?
Best regards
Stefan Torkel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-12-09 11:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-07 1:02 [Bluez-users] Nokia 7610 file transfer to computer Stefan Torkel
2004-12-07 7:55 ` Marcel Holtmann
2004-12-07 17:00 ` Stefan Torkel
2004-12-08 3:56 ` Marcel Holtmann
2004-12-09 0:44 ` Stefan Torkel
2004-12-09 7:24 ` Marcel Holtmann
2004-12-09 11:11 ` Stefan Torkel [this message]
2004-12-09 11:24 ` Marcel Holtmann
2004-12-09 16:52 ` Stefan Torkel
2004-12-09 19:32 ` Marcel Holtmann
2004-12-09 21:06 ` Stefan Torkel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1102590679.24852.3.camel@nephlim.homenet \
--to=nephlim@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox