* [Bluez-users] can no longer connect with pand
@ 2004-12-09 14:57 wim delvaux
2004-12-09 15:05 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: wim delvaux @ 2004-12-09 14:57 UTC (permalink / raw)
To: bluez-users
I had to reboot and now my pand tries but seems unable to connect to the
server.
Here is the hcidump -a output To me it looks like the link_key (which should
exist since devices are paired) is still OK. However connection fails
What might be wrong ?
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
96 85 0D C7 02 00 12 01 12 01
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
96 85 0D C7 02 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 09 04
> HCI Event: Link Key Request (0x17) plen 6
96 85 0D C7 02 00
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
96 85 0D C7 02 00 83 82 FF 06 0B 83 05 4F 15 E0 05 C5 A0 1C
2A 30
> HCI Event: Command Complete (0x0e) plen 10
01 0B 04 00 96 85 0D C7 02 00
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 96 85 0D C7 02 00 01 00
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
29 00 18 CC
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> HCI Event: Command Status (0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
00 29 00 18 CC
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Disconn Complete (0x05) plen 4
00 29 00 13
> HCI Event: Connect Request (0x04) plen 10
96 85 0D C7 02 00 12 01 12 01
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
96 85 0D C7 02 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 09 04
> HCI Event: Link Key Request (0x17) plen 6
96 85 0D C7 02 00
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
96 85 0D C7 02 00 83 82 FF 06 0B 83 05 4F 15 E0 05 C5 A0 1C
2A 30
> HCI Event: Command Complete (0x0e) plen 10
01 0B 04 00 96 85 0D C7 02 00
> HCI Event: Connect Complete (0x03) plen 11
00 2A 00 96 85 0D C7 02 00 01 00
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
2A 00 18 CC
> HCI Event: Max Slots Change (0x1b) plen 3
2A 00 05
> HCI Event: Command Status (0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
00 2A 00 18 CC
> ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< ACL data: handle 0x002a flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 2A 00 01 00
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-users] can no longer connect with pand
2004-12-09 14:57 [Bluez-users] can no longer connect with pand wim delvaux
@ 2004-12-09 15:05 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2004-12-09 15:05 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Wim,
> Here is the hcidump -a output To me it looks like the link_key (which should
> exist since devices are paired) is still OK. However connection fails
>
> What might be wrong ?
>
> device: hci0 snap_len: 1028 filter: 0xffffffff
> > HCI Event: Connect Request (0x04) plen 10
> 96 85 0D C7 02 00 12 01 12 01
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> 96 85 0D C7 02 00 01
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 09 04
> > HCI Event: Link Key Request (0x17) plen 6
> 96 85 0D C7 02 00
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> 96 85 0D C7 02 00 83 82 FF 06 0B 83 05 4F 15 E0 05 C5 A0 1C
> 2A 30
> > HCI Event: Command Complete (0x0e) plen 10
> 01 0B 04 00 96 85 0D C7 02 00
> > HCI Event: Connect Complete (0x03) plen 11
> 00 29 00 96 85 0D C7 02 00 01 00
> < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> 29 00 18 CC
> > HCI Event: Max Slots Change (0x1b) plen 3
> 29 00 05
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 0F 04
> > HCI Event: Connection Packet Type Changed (0x1d) plen 5
> 00 29 00 18 CC
> > ACL data: handle 0x0029 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 15 scid 0x0040
> < ACL data: handle 0x0029 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 01 29 00 01 00
> > HCI Event: Disconn Complete (0x05) plen 4
> 00 29 00 13
> > HCI Event: Connect Request (0x04) plen 10
> 96 85 0D C7 02 00 12 01 12 01
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> 96 85 0D C7 02 00 01
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 09 04
> > HCI Event: Link Key Request (0x17) plen 6
> 96 85 0D C7 02 00
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> 96 85 0D C7 02 00 83 82 FF 06 0B 83 05 4F 15 E0 05 C5 A0 1C
> 2A 30
> > HCI Event: Command Complete (0x0e) plen 10
> 01 0B 04 00 96 85 0D C7 02 00
> > HCI Event: Connect Complete (0x03) plen 11
> 00 2A 00 96 85 0D C7 02 00 01 00
> < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> 2A 00 18 CC
> > HCI Event: Max Slots Change (0x1b) plen 3
> 2A 00 05
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 0F 04
> > HCI Event: Connection Packet Type Changed (0x1d) plen 5
> 00 2A 00 18 CC
> > ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 15 scid 0x0040
> < ACL data: handle 0x002a flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 01 2A 00 01 00
the result 2 means connection refused, because the PSM is not supported
and this is mostly because no pand is running.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-12-09 15:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-09 14:57 [Bluez-users] can no longer connect with pand wim delvaux
2004-12-09 15:05 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox