* [Bluez-users] multiple BT dongles
@ 2005-01-13 10:59 Marco Trudel
2005-01-13 11:04 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Marco Trudel @ 2005-01-13 10:59 UTC (permalink / raw)
To: bluez-users
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 870 bytes --]
Hello everybody
If i've connected multiple bluetooth dongles to my computer, is it possible
to seperate those two within bluez?
I mean controlling wich services run on wich dongle...
Another little question:
Does anybody know a bluetooth dongle that supports inquiry scan during
active connections?
kind regards
Marco
--
+++ GMX - die erste Adresse für Mail, Message, More +++
1 GB Mailbox bereits in GMX FreeMail http://www.gmx.net/de/go/mail
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] multiple BT dongles
2005-01-13 10:59 [Bluez-users] multiple BT dongles Marco Trudel
@ 2005-01-13 11:04 ` Marcel Holtmann
2005-01-13 21:51 ` Marco Trudel
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2005-01-13 11:04 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Marco,
> If i've connected multiple bluetooth dongles to my computer, is it possible
> to seperate those two within bluez?
> I mean controlling wich services run on wich dongle...
you can assign the services (application like pand) for each dongle, but
right now you can't make the sdpd differ between them.
> Another little question:
> Does anybody know a bluetooth dongle that supports inquiry scan during
> active connections?
Every CSR dongle with at least HCI 16.4 firmware.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] multiple BT dongles
2005-01-13 11:04 ` Marcel Holtmann
@ 2005-01-13 21:51 ` Marco Trudel
2005-01-14 7:27 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Marco Trudel @ 2005-01-13 21:51 UTC (permalink / raw)
To: bluez-users
Hello Marcel
Marcel Holtmann wrote:
> Hi Marco,
>
>
>>If i've connected multiple bluetooth dongles to my computer, is it possible
>>to seperate those two within bluez?
>>I mean controlling wich services run on wich dongle...
>
>
> you can assign the services (application like pand) for each dongle, but
> right now you can't make the sdpd differ between them.
I think we talk about the same thing, but just to get shure:
If i program two different rfcomm services, that would mean that i can
control which service runs on which dongle?
>>Another little question:
>>Does anybody know a bluetooth dongle that supports inquiry scan during
>>active connections?
>
>
> Every CSR dongle with at least HCI 16.4 firmware.
Is the firmware updateable?
Do i have to contact the manufacturer?
Thanks a lot for your help Marcel! As always, you're a big help!
kind regards
Marco Trudel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] multiple BT dongles
2005-01-13 21:51 ` Marco Trudel
@ 2005-01-14 7:27 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2005-01-14 7:27 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Marco,
> > you can assign the services (application like pand) for each dongle, but
> > right now you can't make the sdpd differ between them.
>
> I think we talk about the same thing, but just to get shure:
> If i program two different rfcomm services, that would mean that i can
> control which service runs on which dongle?
if you use the RFCOMM socket then you simply bind() the socket to a
specific BD_ADDR of a local dongle.
> > Every CSR dongle with at least HCI 16.4 firmware.
>
> Is the firmware updateable?
Yes.
> Do i have to contact the manufacturer?
Yes.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-01-14 7:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-13 10:59 [Bluez-users] multiple BT dongles Marco Trudel
2005-01-13 11:04 ` Marcel Holtmann
2005-01-13 21:51 ` Marco Trudel
2005-01-14 7:27 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox