[Bluez-users] Tekram TM-304

[Bluez-users] Tekram TM-304

[George Kibardin]

My usb bluetooth dongle did not recognized by kernel (2.6.7)
Does anybody know something about this dongle support in linux?




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Tekram TM-304

[Marcel Holtmann]

Hi George,

> My usb bluetooth dongle did not recognized by kernel (2.6.7)
> Does anybody know something about this dongle support in linux?

show us the content of /proc/bus/usb/devices.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Tekram TM-304

[George Kibardin]

[-- Attachment #1: Type: text/plain, Size: 2560 bytes --]

Marcel Holtmann wrote:

>Hi George,
>
>  
>
>>My usb bluetooth dongle did not recognized by kernel (2.6.7)
>>Does anybody know something about this dongle support in linux?
>>    
>>
>
>show us the content of /proc/bus/usb/devices.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
>Tool for open source databases. Create drag-&-drop reports. Save time
>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
>Download a FREE copy at http://www.intelliview.com/go/osdn_nl
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users
>__________
>
>http://www.newhost.ru - иПТПЫЙК ИПУФЙОЗ!
>
>
>
>  
>
Hi Marcel,

as you request - piece of my /proc/bus/usb/devices (related to dongle)

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1310 ProdID=0001 Rev=15.00
S:  Manufacturer=SiW
S:  Product=SiW
S:  SerialNumber=E234320D0B00
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
 
Two questions:
1. SiW - Silicon Wave am I right?
2. "Cls=e0(unk. )", why unknown - i saw device class registration code 
in hci_usb.c and bluetooth.ko and hci_usb.ko was automatically loaded at 
startup?

Best regards,
George

[-- Attachment #2: Type: text/html, Size: 3469 bytes --]

Re: [Bluez-users] Tekram TM-304

[Marcel Holtmann]

Hi George,

> as you request - piece of my /proc/bus/usb/devices (related to dongle)
> 
> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=1310 ProdID=0001 Rev=15.00
> S:  Manufacturer=SiW
> S:  Product=SiW
> S:  SerialNumber=E234320D0B00
> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

your device is recognized. What does "hciconfig -a" show?

> 1. SiW - Silicon Wave am I right?

Yes.

> 2. "Cls=e0(unk. )", why unknown - i saw device class registration code
> in hci_usb.c and bluetooth.ko and hci_usb.ko was automatically loaded
> at startup?

Simply a missing id to string mapping inside the kernel.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Tekram TM-304

[George Kibardin]

Hi Marcel,

Here we have problem, it seems like hciconfig does not see my dongle

hciconfig -a output:
hci0:    Type: USB
    BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
    DOWN
    RX bytes:0 acl:0 sco:0 events:0 errors:0
    TX bytes:0 acl:0 sco:0 commands:0 errors:0
    Features: 0x00 0x00 0x00 0x00
    Packet type: DM1 DH1 HV1
    Link policy:
    Link mode: SLAVE ACCEPT
 
I think that BD Address should not consist of zeroes only ;)

Best regards.
George



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Tekram TM-304

[Marcel Holtmann]

Hi George,

> Here we have problem, it seems like hciconfig does not see my dongle
> 
> hciconfig -a output:
> hci0:    Type: USB
>     BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
>     DOWN
>     RX bytes:0 acl:0 sco:0 events:0 errors:0
>     TX bytes:0 acl:0 sco:0 commands:0 errors:0
>     Features: 0x00 0x00 0x00 0x00
>     Packet type: DM1 DH1 HV1
>     Link policy:
>     Link mode: SLAVE ACCEPT
>  
> I think that BD Address should not consist of zeroes only ;)

the dongle is there. Did you tried to call "hciconfig hci0 up" or to
start hcid?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Tekram TM-304

[George Kibardin]

Hi Marcel,

I got it !!! )

I dont know why, but I thought that "hciconfig -a" should display all 
devices, no matter "up" or "down".
But the hciconfig works the same as ifconfig - device "appears" only 
after you "up" it.

Sorry for wasting your time, best regards,
George



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users