* [Bluez-users] Re: [bluetooth-dev] how to get bluetooth to emulate comport?
@ 2005-03-21 9:19 John H.
2005-03-21 11:30 ` [Bluez-users] " Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: John H. @ 2005-03-21 9:19 UTC (permalink / raw)
To: bluez-users
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 5605 bytes --]
Not been prompted to enter pin, keep getting
Can't connect RFCOMM socket: Connection refused
despite scan finding the device.
put those lm and lp entries in hcid.conf, and even
tried(afterward)putting the following in rfcomm.conf
rfcomm0 {
bind no;
device 08:00:37:12:C4:B1;
channel 1;
comment "PM325 by LG";
}
any ideas?
> --- Daniel Würfel <d.wuerfel@imail.de> wrote:
>
> > Have you been told to enter a pin?
> > Check /etc/bluetooth/hcid.conf
> > lm accept,master;
> >
> > lp hold,sniff,park,rswitch;
> >
> >
> > Check if there is an entry "BlueZ0" in your handy
> > and delete it.
> > Then try again.
> >
> >
> > -
> > ---- Original Message -----
> > From: "John H." <mistamaila@yahoo.com>
> > To: "D.W." <sword@gmx.de>;
> <bluetooth-dev@axis.com>
> > Sent: Wednesday, March 02, 2005 10:21 AM
> > Subject: Re: [bluetooth-dev] how to get bluetooth
> to
> > emulate comport?
> >
> >
> > > /etc/rc.d/init.d/bluetooth status
> > > hcid (pid 21924) is running...
> > > sdpd (pid 21930) is running...
> > >
> > > hci0: Type: USB
> > > BD Address: 00:02:72:81:AB:C4 ACL MTU:
> > 192:8
> > > SCO MTU: 64:8
> > > UP RUNNING PSCAN ISCAN
> > > RX bytes:1486 acl:35 sco:0 events:97
> > errors:0
> > > TX bytes:1594 acl:35 sco:0 commands:42
> > > errors:0
> > >
> > > hcitool scan
> > > Scanning ...
> > > 08:00:37:0F:84:35
> John@PM325(PHONE)
> > >
> > >
> > > rfcomm connect 0 08:00:37:0F:84:35
> > > Can't connect RFCOMM socket: Connection refused
> > >
> > >
> > >
> > > --- "D.W." <sword@gmx.de> wrote:
> > >
> > > > Have you been told to enter a pin? Normally a
> > window
> > > > opens in Linux when
> > > > executing rfcomm where you can enter it.
> > > > Then you have to enter the same pin in your
> > phone
> > > > when asked for.
> > > >
> > > > Oh sorry, I forgot something: After "hciconfig
> > hci0
> > > > up" you have to execute
> > > > "hcid". Then run rfcomm ...
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "John H." <mistamaila@yahoo.com>
> > > > To: <sword@gmx.de>; <bluetooth-dev@axis.com>
> > > > Sent: Tuesday, March 01, 2005 4:33 AM
> > > > Subject: Re: [bluetooth-dev] how to get
> > bluetooth to
> > > > emulate comport?
> > > >
> > > >
> > > > > ok, hciconfig hci0 up works
> > > > >
> > > > > I tried the second part and, despite telling
> > my
> > > > pm-325
> > > > > to be visible, and telling it waiting for
> > pairing,
> > > > got
> > > > > this...
> > > > >
> > > > >
> > > > > rfcomm connect 0 08:00:37:0f:84:35
> > > > > Can't connect RFCOMM socket: Connection
> > refused
> > > > >
> > > > >
> > > > > --- "D.W." <sword@gmx.de> wrote:
> > > > >
> > > > > > Try this:
> > > > > >
> > > > > > hciconfig hci0 up
> > > > > > rfcomm connect 0 <bt-address from your
> > handy>
> > > > > >
> > > > > > Then you shoulfdhave a com port
> /dev/rfcomm0
> > > > > > Daniel
> > > > > > ----- Original Message -----
> > > > > > From: "John H." <mistamaila@yahoo.com>
> > > > > > To: <bluetooth-dev@axis.com>
> > > > > > Sent: Thursday, February 24, 2005 3:55 AM
> > > > > > Subject: [bluetooth-dev] how to get
> > bluetooth to
> > > > > > emulate comport?
> > > > > >
> > > > > >
> > > > > > > i want to use my cell phone in linux as
> i
> > can
> > > > in
> > > > > > > windows, with bluetooth emulation, to
> > connect
> > > > to
> > > > > > > internet via dialing #777.
> > > > > > >
> > > > > > > I have zonet zub6110 usb adapter, which
> I
> > have
> > > > > > read
> > > > > > > works in linux.
> > > > > > >
> > > > > > > I am on fedora core 3.
> > > > > > >
> > > > > > > How do I get the com port emulation in
> > order
> > > > to
> > > > > > use it
> > > > > > > as a modem?
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > __________________________________
> > > > > > > Do you Yahoo!?
> > > > > > > Read only the mail you want - Yahoo!
> Mail
> > > > > > SpamGuard.
> > > > > > > http://promotions.yahoo.com/new_mail
> > > > > > > -
> > > > > > > To unsubscribe from this list: send the
> > line
> > > > > > "unsubscribe bluetooth-dev"
> > > > > > in
> > > > > > > the body of a message to
> > majordomo@axis.com
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > __________________________________
> > > > > Do you Yahoo!?
> > > > > Read only the mail you want - Yahoo! Mail
> > > > SpamGuard.
> > > > > http://promotions.yahoo.com/new_mail
> > > > > -
> > > > > To unsubscribe from this list: send the line
> > > > "unsubscribe bluetooth-dev"
> > > > in
> > > > > the body of a message to majordomo@axis.com
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam? Yahoo! Mail has the best spam
> > protection around
> > > http://mail.yahoo.com
> > > -
> > > To unsubscribe from this list: send the line
> > "unsubscribe bluetooth-dev"
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] how to get bluetooth to emulate comport? 2005-03-21 9:19 [Bluez-users] Re: [bluetooth-dev] how to get bluetooth to emulate comport? John H. @ 2005-03-21 11:30 ` Marcel Holtmann 0 siblings, 0 replies; 6+ messages in thread From: Marcel Holtmann @ 2005-03-21 11:30 UTC (permalink / raw) To: BlueZ Mailing List Hi John, > Not been prompted to enter pin, keep getting > > Can't connect RFCOMM socket: Connection refused > > despite scan finding the device. > > put those lm and lp entries in hcid.conf, and even > tried(afterward)putting the following in rfcomm.conf > > rfcomm0 { > bind no; > device 08:00:37:12:C4:B1; > channel 1; > comment "PM325 by LG"; > } > > > any ideas? what about starting a new mailing list thread with a new posting to the correct mailing list with your problem? Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <50BF37ECE4954A4BA18C08D0C2CF88CB0104037E@exmail1.se.axis.com>]
* [Bluez-users] how to get bluetooth to emulate comport? [not found] <50BF37ECE4954A4BA18C08D0C2CF88CB0104037E@exmail1.se.axis.com> @ 2005-02-27 8:28 ` John H. 2005-02-28 8:08 ` Marcel Holtmann 0 siblings, 1 reply; 6+ messages in thread From: John H. @ 2005-02-27 8:28 UTC (permalink / raw) To: bluez-users I have zonet usb dongle, pm-325 sprint phone. hciconfig hci0 up Can't open HCI socket.: Address family not supported by protocol I thought i installed the necessary modules? Also, pin link is broken. > > > > --- "D.W." <sword@gmx.de> wrote: > > > > > Try this: > > > > > > hciconfig hci0 up > > > rfcomm connect 0 <bt-address from your handy> > > > > > > Then you shoulfdhave a com port /dev/rfcomm0 > > > Daniel __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] how to get bluetooth to emulate comport? 2005-02-27 8:28 ` John H. @ 2005-02-28 8:08 ` Marcel Holtmann 2005-03-01 3:36 ` John H. 0 siblings, 1 reply; 6+ messages in thread From: Marcel Holtmann @ 2005-02-28 8:08 UTC (permalink / raw) To: BlueZ Mailing List Hi John, > I have zonet usb dongle, pm-325 sprint phone. > > hciconfig hci0 up > > Can't open HCI socket.: Address family not > supported by protocol > > I thought i installed the necessary modules? check what "lsmod | grep bluetooth" says. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] how to get bluetooth to emulate comport? 2005-02-28 8:08 ` Marcel Holtmann @ 2005-03-01 3:36 ` John H. 2005-03-01 8:30 ` Marcel Holtmann 0 siblings, 1 reply; 6+ messages in thread From: John H. @ 2005-03-01 3:36 UTC (permalink / raw) To: BlueZ Mailing List hciconfig hci0 up works rfcomm connect 0 08:00:37:0f:84:35 Can't connect RFCOMM socket: Connection refused I told my lg pm-325 to be visible, and waiting for pairing. what's the deal? --- Marcel Holtmann <marcel@holtmann.org> wrote: > Hi John, > > > I have zonet usb dongle, pm-325 sprint phone. > > > > hciconfig hci0 up > > > > Can't open HCI socket.: Address family not > > supported by protocol > > > > I thought i installed the necessary modules? > > check what "lsmod | grep bluetooth" says. > > Regards > > Marcel > > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT > Products from real users. > Discover which products truly live up to the hype. > Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] how to get bluetooth to emulate comport? 2005-03-01 3:36 ` John H. @ 2005-03-01 8:30 ` Marcel Holtmann 0 siblings, 0 replies; 6+ messages in thread From: Marcel Holtmann @ 2005-03-01 8:30 UTC (permalink / raw) To: BlueZ Mailing List Hi John, > hciconfig hci0 up > > works > > > rfcomm connect 0 08:00:37:0f:84:35 > Can't connect RFCOMM socket: Connection refused > > I told my lg pm-325 to be visible, and waiting for > pairing. > what's the deal? run "hcidump -X -V" as root and I think you will see a PIN code request that is never answered. Start hcid. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-03-21 11:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-21 9:19 [Bluez-users] Re: [bluetooth-dev] how to get bluetooth to emulate comport? John H.
2005-03-21 11:30 ` [Bluez-users] " Marcel Holtmann
[not found] <50BF37ECE4954A4BA18C08D0C2CF88CB0104037E@exmail1.se.axis.com>
2005-02-27 8:28 ` John H.
2005-02-28 8:08 ` Marcel Holtmann
2005-03-01 3:36 ` John H.
2005-03-01 8:30 ` Marcel Holtmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox