From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] cannot connect to pm-325 phone w/bluez
Date: Wed, 30 Mar 2005 10:34:13 +0200 [thread overview]
Message-ID: <1112171653.9016.249.camel@pegasus> (raw)
In-Reply-To: <20050330082943.59563.qmail@web50710.mail.yahoo.com>
Hi John,
> says -V is invalid on 1.11.
then install the latest version. Decoding every thing of a dump by hand
costs me too much time.
> here is with -X
>
> HCIDump - HCI packet analyzer ver 1.11
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> 0000: b1 c4 12 37 00 08 18 cc 01 00 d1 a2 01
> ...7.........
> > HCI Event: Command Status (0x0f) plen 4
> 0000: 00 01 05 04
> ....
> > HCI Event: Connect Complete (0x03) plen 11
> 0000: 00 2a 00 b1 c4 12 37 00 08 01 00
> .*....7....
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 1 scid 0x0040
> < HCI Command: Write Link Policy Settings
> (0x02|0x000d) plen 4
> 0000: 2a 00 0f 00
> *...
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > HCI Event: Command Complete (0x0e) plen 6
> 0000: 01 0d 08 00 2a 00
> ....*.
> > HCI Event: Max Slots Change (0x1b) plen 3
> 0000: 2a 00 05
> *..
> > ACL data: handle 0x002a flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040
> result 0 status 0
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x0042 flags 0x0000
> clen 0
> > ACL data: handle 0x002a flags 0x02 dlen 20
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000
> clen 8
> MTU 256 FlushTO 65535
> < ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0042 flags 0x0000
> result 0 clen 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000
> result 0 clen 0
> < ACL data: handle 0x002a flags 0x02 dlen 24
> L2CAP(d): cid 0x0042 len 20 [psm 1]
> SDP SSA Req: tid 0x0 len 0xf
> pat uuid-16 0x1103 (DUN)
> max 0xffff
> aid(s) 0x0000 - 0xffff
> cont 00
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(d): cid 0x0040 len 10 [psm 1]
> SDP SSA Rsp: tid 0x0 len 0x5
> cnt 0x2
> cont 00
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0042 scid 0x0040
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Disconn rsp: dcid 0x0042 scid 0x0040
> > HCI Event: Disconn Complete (0x05) plen 4
> 0000: 00 2a 00 13
> .*..
It seems that your phone doesn't support the dialup networking profile.
What kind of phone is this?
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-03-30 8:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-30 8:29 [Bluez-users] cannot connect to pm-325 phone w/bluez John H.
2005-03-30 8:34 ` Marcel Holtmann [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-04-10 2:34 John H.
2005-04-03 0:55 John H.
2005-03-30 9:15 John H.
2005-03-30 8:11 John H.
2005-03-30 8:18 ` Marcel Holtmann
2005-03-30 7:51 John H.
2005-03-30 7:58 ` Marcel Holtmann
2005-03-30 7:27 John H.
2005-03-30 7:37 ` Marcel Holtmann
2005-03-30 2:09 John H.
2005-03-30 6:01 ` Marcel Holtmann
2005-03-30 1:52 John H.
2005-03-30 2:03 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112171653.9016.249.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox