From: "John H." <mistamaila@yahoo.com>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] cannot connect to pm-325 phone w/bluez
Date: Tue, 29 Mar 2005 17:52:45 -0800 (PST) [thread overview]
Message-ID: <20050330015245.87135.qmail@web50703.mail.yahoo.com> (raw)
Despite it saying connection refused, the phone, when
searching/pairing, finds laptop-0, but pair fails
after i tell it to use 0000 for pin.
hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 8 num 100
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 08:00:37:12:C4:B1 clkoffset 0x6ceb class
0x400204
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen
10
bdaddr 08:00:37:12:C4:B1 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd
1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 08:00:37:12:C4:B1 name 'PM325
by LG'
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 08:00:37:12:C4:B1 ptype 0xcc18 rswitch 0x00
clkoffset 0x6ceb (valid)
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 08:00:37:12:C4:B1
type ACL encrypt 0x00
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings
(0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 41
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 05
)..
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0040
result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen
4
MTU 1024
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen
4
MTU 675
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00
result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00
result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs
0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs
0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7
ack_timer 0
frame_size 670 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 0 ilen 0 fcs 0x66
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs
0xfd
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0040
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x13
Reason: Remote User Teminated Connection
--- Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi John,
>
> > hcitool scan
> > Scanning ...
> > 08:00:37:12:C4:B1 PM325 by LG
> > [root@laptop user]# hcidump -X -V
> > HCI sniffer - Bluetooth packet analyzer ver 1.18
> > device: hci0 snap_len: 1028 filter: 0xffffffff
>
> this is a sniffer and so you must actually do
> something, because
> otherwise it won't show anything.
>
> Regards
>
> Marcel
>
>
>
>
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2005-03-30 1:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-30 1:52 John H. [this message]
2005-03-30 2:03 ` [Bluez-users] cannot connect to pm-325 phone w/bluez Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2005-03-30 2:09 John H.
2005-03-30 6:01 ` Marcel Holtmann
2005-03-30 7:27 John H.
2005-03-30 7:37 ` Marcel Holtmann
2005-03-30 7:51 John H.
2005-03-30 7:58 ` Marcel Holtmann
2005-03-30 8:11 John H.
2005-03-30 8:18 ` Marcel Holtmann
2005-03-30 8:29 John H.
2005-03-30 8:34 ` Marcel Holtmann
2005-03-30 9:15 John H.
2005-04-03 0:55 John H.
2005-04-10 2:34 John H.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050330015245.87135.qmail@web50703.mail.yahoo.com \
--to=mistamaila@yahoo.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox