Linux bluetooth development
 help / color / mirror / Atom feed
* [Bluez-users] LMP test mode
@ 2005-04-23 21:40 Sergei Koveshnikov
  2005-04-23 22:16 ` Marcel Holtmann
  0 siblings, 1 reply; 2+ messages in thread
From: Sergei Koveshnikov @ 2005-04-23 21:40 UTC (permalink / raw)
  To: bluez-users

Hello,
  I am trying to use LMP test mode witch described in the Bluetooth 
specification, however as it turned out I can't control test process via the 
air interface! :-(
  I have read intently Bluetooth specification and look through the
source code of BlueZ protocol stack, however I didn't find any way to
send PDU with the LMP_test_activate (opcode 56) or LMP_test_control
(opcode 57)!

Could you say to me how I can make these LMP PDU's with help of the
HCI interface?

Thank you very much for your replies!

-- 
Sergei Koveshnikov.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Bluez-users] LMP test mode
  2005-04-23 21:40 [Bluez-users] LMP test mode Sergei Koveshnikov
@ 2005-04-23 22:16 ` Marcel Holtmann
  0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2005-04-23 22:16 UTC (permalink / raw)
  To: bluez-users

Hi Sergei,

>   I am trying to use LMP test mode witch described in the Bluetooth 
> specification, however as it turned out I can't control test process via the 
> air interface! :-(
>   I have read intently Bluetooth specification and look through the
> source code of BlueZ protocol stack, however I didn't find any way to
> send PDU with the LMP_test_activate (opcode 56) or LMP_test_control
> (opcode 57)!
> 
> Could you say to me how I can make these LMP PDU's with help of the
> HCI interface?

there is no interaction with the link manager. You can only do what the
HCI specification allows you to do.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-04-23 22:16 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-23 21:40 [Bluez-users] LMP test mode Sergei Koveshnikov
2005-04-23 22:16 ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox