Re: [Bluez-users] problems syncing with bluetooth on multisync: evolution/blueotooth plugin

[Tamer Higazi <tamer23@myrealbox.com>]

Hi! 

I made what you wrote me: 

1. bluepin is on my system not installed, only bluez-pin
2. sdp and hci were started (switched on at yast and listed with the
command ps -A)
3. In yast2 the bluetooth section was switched "asking user for
password"
4. I run multisync and tried to test a connection on my phone's channel
11

Thank you in advance very much for your help. 

Here the ouptut: 

linux:/ # hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:E0:03:65:64:94 ptype 0xcc18 rswitch 0x01 clkoffset 0x3cef
(valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 41 bdaddr 00:E0:03:65:64:94 type ACL encrypt 0x00
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
    handle 41 policy 0x0f
    Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> HCI Event: Max Slots Change (0x1b) plen 3
  0000: 29 00 05                                          )..
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0060 scid 0x0040 result 1 status 2
      Connection pending - Authorization pending
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0060 scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0060 flags 0x00 clen 4
      MTU 1024
> ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0060 flags 0x00 result 0 clen 0
      Success
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 672
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0060 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0060 len 14 [psm 3]
      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
      dlci 22 frame_type 0 credit_flow 15 pri 7 ack_timer 0
      frame_size 667 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): DM: cr 1 dlci 22 pf 1 ilen 0 fcs 0x92
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0060 len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0060 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41
> ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0060 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
    handle 41 reason 0x13
    Reason: Remote User Teminated Connection
> HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 41 reason 0x16
    Reason: Connection Terminated by Local Host


Am Dienstag, den 17.05.2005, 14:55 +0200 schrieb Marcel Holtmann:
> Hi Tamer,
> 
> > kbluetoothd is running and up. Why it still doesn't work, is something I
> > don't understand. Either I downloaded, compiled and installed bluez-pin.
> > Inside the hcid.conf I modified the line: 
> 
> send in the output of "hcidump -X -V" as root while you are trying to
> sync. And check with YaST that at least hcid and sdpd are started.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
> 



-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users