From: Marcel Holtmann <marcel@holtmann.org>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Re: bluetooth 1.2 and 2.0 dongles support
Date: Fri, 14 Oct 2005 13:00:10 +0200 [thread overview]
Message-ID: <1129287610.5057.42.camel@localhost.localdomain> (raw)
In-Reply-To: <01C5D0BE.7F71DF60.emonturus@teltronic.es>
Hi Esteban,
> >> 2. I have a Cellink BTA-3120 dongle. Although Cellink says that it is
> >> Bluetooth 1.2 compliant, when I use it with BlueZ, the HCI version I get
> >> with hciconfig is 1.1. Is that wright?
>
> >Send in the "hciconfig hci0 features" output.
>
> EWS4:/ # hciconfig hci0 features
> hci0: Type: USB
> BD Address: 00:0A:94:11:77:F5 ACL MTU: 120:20 SCO MTU: 64:0
> Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
> <3-slot packets> <5-slot packets> <encryption> <slot offset>
> <timing accuracy> <role switch> <hold mode> <sniff mode>
> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
> <HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
this is a Bluetooth 1.1 dongle.
> >> 3. I also have an old Belkin F8T001 dongle. When I plugged it BlueZ loaded
> >> always some firmware stuff and it worked properly. My old version of BlueZ
> >> had a bluez-bluefw-1.0-202 rpm packet. I think this is equivalent to the
> >> new tarball bluez-firmware that I have downloaded from BlueZ's homepage and
> >> installed, but the reality is that this dongle doesn't work anymore.
>
> >Use bluez-firmware and the bcm203x kernel driver for the 2.6 kernels.
>
> How do I use this driver? I have tried to load it with insmod and I get the following:
>
> EWS4:~/paquetes_rpm # insmod /lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko
> insmod: error inserting '/lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko': -1 Unknown symbol in module
>
> At the same time the following lines appear in the /var/log/messages file:
>
> Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol release_firmware
> Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol request_firmware
Load the firmware_class kernel module and place the firmware files
under /lib/firmware/
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-10-14 11:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-14 10:55 [Bluez-users] Re: bluetooth 1.2 and 2.0 dongles support Esteban Monturus
2005-10-14 11:00 ` Marcel Holtmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1129287610.5057.42.camel@localhost.localdomain \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox