* [Bluez-devel] Bluez Bluetooth certification tests?
@ 2006-05-24 13:08 Michael Frey
2006-05-29 13:12 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Michael Frey @ 2006-05-24 13:08 UTC (permalink / raw)
To: bluez-devel
Are there any Bluetooth certification tests for the Bluez stack?
Test for the stack and supporting profiles?
I noticed that Bluez is listed on the Bluetooth.org site as a
compliant stack, I was curious how this certification was achieved.
Thanks,
Michael
-------------------------------------------------------
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-devel] Bluez Bluetooth certification tests?
2006-05-24 13:08 [Bluez-devel] Bluez Bluetooth certification tests? Michael Frey
@ 2006-05-29 13:12 ` Marcel Holtmann
2006-05-30 14:06 ` Michael Frey
0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2006-05-29 13:12 UTC (permalink / raw)
To: bluez-devel
Hi Michael,
> Are there any Bluetooth certification tests for the Bluez stack?
>
> Test for the stack and supporting profiles?
>
> I noticed that Bluez is listed on the Bluetooth.org site as a
> compliant stack, I was curious how this certification was achieved.
the Bluetooth SIG defines for every protocol and profile a bunch of
qualification test cases. You need to pass to get the qualification. The
BlueZ qualification was sponsored by TomTom and we did it at a test lab
of RFI somewhere in England.
Regards
Marcel
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-devel] Bluez Bluetooth certification tests?
2006-05-29 13:12 ` Marcel Holtmann
@ 2006-05-30 14:06 ` Michael Frey
2006-05-30 14:23 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Michael Frey @ 2006-05-30 14:06 UTC (permalink / raw)
To: BlueZ development
Marcel,
Are there any resulting test harness or supporting code from TomTom's
effort? Or does the fact the if someone uses the Bluez stack, they
are by default certified?
Thanks,
Michael
On May 29, 2006, at 9:12 AM, Marcel Holtmann wrote:
> Hi Michael,
>
>> Are there any Bluetooth certification tests for the Bluez stack?
>>
>> Test for the stack and supporting profiles?
>>
>> I noticed that Bluez is listed on the Bluetooth.org site as a
>> compliant stack, I was curious how this certification was achieved.
>
> the Bluetooth SIG defines for every protocol and profile a bunch of
> qualification test cases. You need to pass to get the
> qualification. The
> BlueZ qualification was sponsored by TomTom and we did it at a test
> lab
> of RFI somewhere in England.
>
> Regards
>
> Marcel
>
>
>
>
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-devel] Bluez Bluetooth certification tests?
2006-05-30 14:06 ` Michael Frey
@ 2006-05-30 14:23 ` Marcel Holtmann
2006-05-30 14:58 ` Michael Frey
0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2006-05-30 14:23 UTC (permalink / raw)
To: BlueZ development
Hi Michael,
> Are there any resulting test harness or supporting code from TomTom's
> effort? Or does the fact the if someone uses the Bluez stack, they
> are by default certified?
you can use the current BlueZ qualification to qualify your own product.
It will save you a lot of time, because most test have are already been
done. And I think we spent 4 days with the L2CAP, RFCOMM and SDP testing
and you don't wanna do it again normally.
At some point the BlueZ qualification must be updated to PRD 2.0, but I
only wanna do that after the Lisbon specification has been released. It
makes no real sense to do it again now. With PRD 2.0 it should also
include some kind of HCI qualification so you basically don't even have
to re-qualify your hardware. However I haven't fully looked into the new
qualification program. I will do that when the next specification
version gets public and I have found a sponsor for it. We still have to
pay the listing fee.
Regards
Marcel
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-devel] Bluez Bluetooth certification tests?
2006-05-30 14:23 ` Marcel Holtmann
@ 2006-05-30 14:58 ` Michael Frey
2006-05-30 15:05 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Michael Frey @ 2006-05-30 14:58 UTC (permalink / raw)
To: BlueZ development
[-- Attachment #1.1: Type: text/plain, Size: 1601 bytes --]
Hi Marcel,
I think I am understanding. Couple of more things.
We use a certified Bluetooth module (Insung module using a CSR chip)
along with Bluez. Do you know what testing will we need to do as a
product to get certification? And how do we reference the Bluez stack
in our certification?
Thanks,
Michael
On May 30, 2006, at 10:23 AM, Marcel Holtmann wrote:
> Hi Michael,
>
>> Are there any resulting test harness or supporting code from TomTom's
>> effort? Or does the fact the if someone uses the Bluez stack, they
>> are by default certified?
>
> you can use the current BlueZ qualification to qualify your own
> product.
> It will save you a lot of time, because most test have are already
> been
> done. And I think we spent 4 days with the L2CAP, RFCOMM and SDP
> testing
> and you don't wanna do it again normally.
>
> At some point the BlueZ qualification must be updated to PRD 2.0,
> but I
> only wanna do that after the Lisbon specification has been
> released. It
> makes no real sense to do it again now. With PRD 2.0 it should also
> include some kind of HCI qualification so you basically don't even
> have
> to re-qualify your hardware. However I haven't fully looked into
> the new
> qualification program. I will do that when the next specification
> version gets public and I have found a sponsor for it. We still
> have to
> pay the listing fee.
>
> Regards
>
> Marcel
>
>
>
>
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
[-- Attachment #1.2: Type: text/html, Size: 6239 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-05-30 15:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-24 13:08 [Bluez-devel] Bluez Bluetooth certification tests? Michael Frey
2006-05-29 13:12 ` Marcel Holtmann
2006-05-30 14:06 ` Michael Frey
2006-05-30 14:23 ` Marcel Holtmann
2006-05-30 14:58 ` Michael Frey
2006-05-30 15:05 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox