From: Jon Barnett <jbarnett@pobox.com>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] Problems with Dell BCM2045 USB device
Date: Tue, 02 Jan 2007 21:58:50 -0500 [thread overview]
Message-ID: <1167793130.3356.17.camel@localhost> (raw)
In-Reply-To: <mailman.341782.1167746753.8777.bluez-devel@lists.sourceforge.net>
[-- Attachment #1.1: Type: text/plain, Size: 23461 bytes --]
OK. I finally got back around to looking at the btsco compilation issue
(compiling snd_bt_sco). It turns out to be because of changes with the
new ALSA definitions. Adding the declaration:
#include <sound/typedefs.h>
fixed compiling the module.
I have a Dell Inspiron 9400 that has a USB bluetooth local device based
on the BCM2045 chip.
The lsusb output for the device is:
Bus 2 Device 5: ID 413c:8126 Dell Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x413c Dell Computer Corp.
idProduct 0x8126
bcdDevice 1.00
iManufacturer 1 Broadcom Corp
iProduct 2 BCM2045
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
Device Status: 0x0000
(Bus Powered)
When I try to aplay -D plughw:Headset r4bed.wav it just hangs.
The output for btsco -v ... is:
btsco v0.42
Device is 2:0
Voice setting: 0x0060
RFCOMM channel 1 connected
Using interface hci0
recieved AT*ECBP=?
recieved AT+CLIP=1
recieved AT+CSCS="UTF-8"
recieved AT*SEAM="HBH-610a",13
recieved AT+CLAN?
speaker volume: 0 mic volume: 0
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=6
Sending up speaker change 6
speaker volume: 6 mic volume: 1
hcidump -X -V produces this for the session:
HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:12:EE:E0:AB:CA ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 00:12:EE:E0:AB:CA type ACL encrypt 0x00
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 12 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xff 0xfd 0x29 0x78 0x18 0x18 0x00 0x80
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 12
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:12:EE:E0:AB:CA mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x005e scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005e flags 0x00 clen 0
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 100
< ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x005e flags 0x00 result 0 clen 4
Success
MTU 100
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:12:EE:E0:AB:CA name 'HBH-610a'
> ACL data: handle 12 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 12 flags 0x02 dlen 24
L2CAP(d): cid 0x005e len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 4
> ACL data: handle 12 flags 0x02 dlen 27
> ACL data: handle 12 flags 0x01 dlen 27
> ACL data: handle 12 flags 0x01 dlen 27
> ACL data: handle 12 flags 0x01 dlen 25
L2CAP(d): cid 0x0040 len 102 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x61
count 94
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "SonyEricsson Headset Service"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x005e scid 0x0040
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x005e scid 0x0040
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x005f scid 0x0041 result 1 status 1
Connection pending - Authentication pending
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:12:EE:E0:AB:CA
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:12:EE:E0:AB:CA key FDA84C7E01635351CE60FF683AEDE32F
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:12:EE:E0:AB:CA
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x005f scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x005f flags 0x00 clen 4
MTU 1013
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 56
< ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x005f flags 0x00 result 0 clen 4
Success
MTU 56
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 4
> ACL data: handle 12 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
< ACL data: handle 12 flags 0x02 dlen 8
L2CAP(d): cid 0x005f len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> ACL data: handle 12 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 12 flags 0x02 dlen 18
L2CAP(d): cid 0x005f len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 51 max_retrans 0 credits 7
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 0 ack_timer 0
frame_size 50 max_retrans 0 credits 0
< ACL data: handle 12 flags 0x02 dlen 8
L2CAP(d): cid 0x005f len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> ACL data: handle 12 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(d): cid 0x005f len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 12 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(d): cid 0x005f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 4
> ACL data: handle 12 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 12 flags 0x02 dlen 9
L2CAP(d): cid 0x005f len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 12 flags 0x02 dlen 20
L2CAP(d): cid 0x0041 len 16 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 20
0000: 41 54 2a 45 43 42 50 3d 3f 0d AT*ECBP=?.
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 10 fcs 0x40
0000: 41 54 2b 43 4c 49 50 3d 31 0d AT+CLIP=1.
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 4
> ACL data: handle 12 flags 0x02 dlen 26
L2CAP(d): cid 0x0041 len 22 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 16 fcs 0x5c credits 1
0000: 41 54 2b 43 53 43 53 3d 22 55 54 46 2d 38 22 0d AT+CSCS="UTF-8".
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> ACL data: handle 12 flags 0x02 dlen 27
> ACL data: handle 12 flags 0x01 dlen 5
L2CAP(d): cid 0x0041 len 28 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 22 fcs 0x5c credits 1
0000: 41 54 2a 53 45 41 4d 3d 22 48 42 48 2d 36 31 30 AT*SEAM="HBH-610
0010: 61 22 2c 31 33 0d a",13.
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 9 fcs 0x5c credits 1
0000: 41 54 2b 43 4c 41 4e 3f 0d AT+CLAN?.
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 3
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 1
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 12 mode 0x02 interval 2048
Mode: Sniff
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
handle 12 ptype 0x00e0
Packet type: HV1 HV2 HV3
> HCI Event: Command Status (0x0f) plen 4
Add SCO Connection (0x01|0x0007) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 1 bdaddr 00:12:EE:E0:AB:CA type SCO encrypt 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:12:EE:E0:AB:CA mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 9 fcs 0x5c credits 2
0000: 41 54 2b 56 47 53 3d 36 0d AT+VGS=6.
< ACL data: handle 12 flags 0x02 dlen 14
L2CAP(d): cid 0x005f len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:12:EE:E0:AB:CA name 'HBH-610a'
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 12 mode 0x00 interval 0
Mode: Active
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 1 ptype 0x0080
Packet type: HV3
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 12 mode 0x02 interval 2048
Mode: Sniff
The options I use for hci_usb (in /etc/modprobe.d/hci_usb is:
options hci_usb force_scofix=1 reset=1
I've also tried with no options and with only force_scofix=1. Same results.
The headset I'm using works fine with a Kensington USB dongle.
My kernel is 2.6.19 SMP.
Any suggestions would be appreciated.
Cheers,
Jon.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next parent reply other threads:[~2007-01-03 2:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.341782.1167746753.8777.bluez-devel@lists.sourceforge.net>
2007-01-03 2:58 ` Jon Barnett [this message]
2007-01-03 9:28 ` [Bluez-devel] Problems with Dell BCM2045 USB device Marcel Holtmann
2007-01-03 17:05 ` Jon Barnett
2007-01-03 17:14 ` Marcel Holtmann
2007-01-03 20:04 ` Jon Barnett
2007-01-03 20:13 ` Marcel Holtmann
2007-01-03 21:56 ` Jon Barnett
2007-01-03 15:58 ` Brad Midgley
2007-01-08 20:14 ` Jon Barnett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1167793130.3356.17.camel@localhost \
--to=jbarnett@pobox.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox