public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] Bluez config on ARM
@ 2007-02-23  9:01 Kelvin Xu
  2007-02-25 23:52 ` Marcel Holtmann
  0 siblings, 1 reply; 2+ messages in thread
From: Kelvin Xu @ 2007-02-23  9:01 UTC (permalink / raw)
  To: bluez-users


Dear all,

I am currently running Bluez on a ARM board. The hciconfig does not seems to 
be reading from the hcid.conf file. How do i current this?

Below is the output of my hciconfig -a

hci0:   Type: USB
        BD Address: 00:15:E9:7B:A0:B9 ACL MTU: 377:10 SCO MTU: 16:0
        UP RUNNING PSCAN ISCAN
        RX bytes:702 acl:0 sco:0 events:23 errors:0
        TX bytes:83 acl:0 sco:0 commands:23 errors:0
        Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy:
        Link mode: SLAVE ACCEPT
        Name: 'Broadcom BCM2035'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous,
        HCI Ver: 1.2 (0x2) HCI Rev: 0x2788 LMP Ver: 1.2 (0x2) LMP Subver: 
0x309
        Manufacturer: Broadcom Corporation (15)

Regards,
Kelvin

_________________________________________________________________
Get an advanced look at the new version of Windows Live Messenger. 
http://get.live.com/messenger/overview


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Bluez-users] Bluez config on ARM
  2007-02-23  9:01 [Bluez-users] Bluez config on ARM Kelvin Xu
@ 2007-02-25 23:52 ` Marcel Holtmann
  0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2007-02-25 23:52 UTC (permalink / raw)
  To: BlueZ users

Hi Kelvin,

> I am currently running Bluez on a ARM board. The hciconfig does not seems to 
> be reading from the hcid.conf file. How do i current this?

the reason for that might be that it is hciconfig. Start hcid, because
that is the daemon the config is for. Otherwise it would be named
hciconfig.conf, wouldn't it.

Regards

Marcel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-02-25 23:52 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-23  9:01 [Bluez-users] Bluez config on ARM Kelvin Xu
2007-02-25 23:52 ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox