[Bluez-users] Computer not visible to other devices.

[Bluez-users] Computer not visible to other devices.

[Adrian van Dongen]

[-- Attachment #1.1: Type: text/plain, Size: 760 bytes --]

Hi

I installed a new clean debian system and the problem I had before is gone
now ( I can connect to my mobile now). This is a other hardware set so I
don't know if it due to the install or the hardware. I will see what i can
find out.

I do have a small other problem now, my new computer is not visible to other
bluetooth devices... what could be  wrong ?

I read something about iscan en pscan both being enable but this not the
case in the new install:

hci0:   Type: USB
        BD Address: 00:10:60:A9:10:28 ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING PSCAN
        RX bytes:820 acl:0 sco:0 events:34 errors:0
        TX bytes:614 acl:0 sco:0 commands:28 errors:0

can I force iscan to? I do have it enabled in the configuration.

Regards,

Adrian.

[-- Attachment #1.2: Type: text/html, Size: 1180 bytes --]

[-- Attachment #2: Type: text/plain, Size: 286 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Computer not visible to other devices.

[Mats Erik Andersson]

Hello there.

Probably same solution as last week: Add an entry

	discoverto 0;

to the device section of your hcid.conf and reread the
configuration by issuing "sudo killall -HUP hcid".

Good luck	Mats E A


tor 2007-07-19 klockan 14:51 +0200 skrev Adrian van Dongen:
> Hi
> 
> I installed a new clean debian system and the problem I had before is
> gone now ( I can connect to my mobile now). This is a other hardware
> set so I don't know if it due to the install or the hardware. I will
> see what i can find out. 
> 
> I do have a small other problem now, my new computer is not visible to
> other bluetooth devices... what could be  wrong ? 
> 
> I read something about iscan en pscan both being enable but this not
> the case in the new install: 
> 
> hci0:   Type: USB
>         BD Address: 00:10:60:A9:10:28 ACL MTU: 192:8 SCO MTU: 64:8
>         UP RUNNING PSCAN
>         RX bytes:820 acl:0 sco:0 events:34 errors:0 
>         TX bytes:614 acl:0 sco:0 commands:28 errors:0
> 
> can I force iscan to? I do have it enabled in the configuration.
> 
> Regards,
> 
> Adrian.
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users