[Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

Hi,

I'd like to have my sound sent over from my laptop with a BCM2035 chip to a
Hama receiver. Though it works fine under W*ws, the sound under Linux is
broken off every minute for a second to continue afterwards. I used mplayer
and xmms2. and both have this problem.

I use bluez-libs/utils 3.2
Commands to get audio online:
dbus-send --system --print-reply --dest=org.bluez /org/bluez \
org.bluez.Manager.ActivateService string:audio
dbus-send --system --type=method_call --print-reply --dest=":1.19"
/org/bluez/audio \ org.bluez.audio.Manager.CreateDevice
string:00:10:60:9F:32:3B

For some reason sco isn't used...

Thanks!


Remy



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Marcel Holtmann]

Hi Remy,

> I'd like to have my sound sent over from my laptop with a BCM2035 chip to a
> Hama receiver. Though it works fine under W*ws, the sound under Linux is
> broken off every minute for a second to continue afterwards. I used mplayer
> and xmms2. and both have this problem.

try the version from CVS or wait until I release a new one. These issues
should be fixed now.

Regards

Marcel



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

[-- Attachment #1: Type: text/plain, Size: 378 bytes --]

Marcel Holtmann wrote:
> Hi Remy,
>
> try the version from CVS or wait until I release a new one. These issues
> should be fixed now.
>
> Regards
>
> Marcel
>   

You mean that the issue was resolved after 3.21? Just installed the 3.21
lib. The utils package of that version won't compile atm.
I have gentoo-2007.0
Got ebuild attached in case on know what to do with it.


Remy

[-- Attachment #2: bluez-utils-3.21.ebuild --]
[-- Type: text/plain, Size: 4746 bytes --]

# Copyright 1999-2007 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez-utils/bluez-utils-3.20.ebuild,v 1.2 2007/10/06 00:41:02 betelgeuse Exp $

inherit autotools eutils

DESCRIPTION="Bluetooth Tools and System Daemons for Linux"
HOMEPAGE="http://bluez.sourceforge.net/"
SRC_URI="http://bluez.sourceforge.net/download/${P}.tar.gz"

LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~arm ~hppa ~ppc ~sh ~sparc ~x86"

IUSE="alsa cups debug examples gstreamer hal old-daemons test-programs usb"

DEPEND="
	>=net-wireless/bluez-libs-${PV}
	alsa? ( media-libs/alsa-lib )
	gstreamer? (
		>=media-libs/gstreamer-0.10
		>=media-libs/gst-plugins-base-0.10 )
	hal? ( sys-apps/hal )
	usb? ( dev-libs/libusb )
	cups? ( net-print/cups )
	sys-fs/udev
	dev-libs/glib
	sys-apps/dbus"

src_unpack() {
	unpack ${A}
	# bundled glib
	cd "${S}"
	rm -r eglib/{*.c,*.h}  || die
	if use cups; then
		epatch "${FILESDIR}/3.11/cups-location.patch"
		eautoreconf
	fi
}

src_compile() {
	# the order is the same as ./configure --help

	# we don't need the other daemons either with the new
	# service architechture
	# hcid has in integrated sdpd now that we use

	# These are currently under work and don't work properly:
	# --enable-sync
	# --enable-obex

	econf \
		$(use_enable debug) \
		--enable-inotify \
		$(use_enable hal) \
		$(use_enable usb) \
		$(use_enable alsa) \
		--enable-glib  \
		$(use_enable gstreamer) \
		--disable-obex \
		--enable-network \
		--enable-serial \
		--enable-input \
		--enable-audio \
		--disable-sync \
		$(use_enable examples echo) \
		--enable-hcid \
		$(use_enable test-programs test) \
		$(use_enable old-daemons sdpd) \
		$(use_enable old-daemons hidd) \
		$(use_enable old-daemons pand) \
		$(use_enable cups) \
		--enable-configfiles \
		--disable-initscripts \
		--disable-pcmciarules \
		--enable-bccmd \
		--enable-avctrl \
		--enable-hid2hci \
		--enable-dfutool \
		--localstatedir=/var \
		|| die "econf failed"

	emake || die "emake failed"
}

src_install() {
	make DESTDIR="${D}" install || die "make install failed"

	dodoc AUTHORS ChangeLog README || die

	# a very simple example daemon
	dobin daemon/passkey-agent || die

	newinitd "${FILESDIR}/3.11/bluetooth-init.d" bluetooth || die
	newconfd "${FILESDIR}/3.11/bluetooth-conf.d" bluetooth || die

	if use old-daemons; then
		sed -re 's/^(Autostart=)true/\1false/' \
			-i "${D}/etc/bluetooth/input.service" || die
		newconfd "${FILESDIR}/3.11/conf.d-hidd" hidd || die
		newinitd "${FILESDIR}/3.11/init.d-hidd" hidd || die
	fi

	# bug #84431
	insinto /etc/udev/rules.d/
	newins "${FILESDIR}/${PN}-3.10.1-udev.rules" 70-bluetooth.rules || die
	newins "${S}/scripts/bluetooth.rules" 70-bluetooth-pcmcia.rules || die

	exeinto /lib/udev/
	newexe "${FILESDIR}/${PN}-3.10.1-udev.script" bluetooth.sh || die
	doexe  "${S}/scripts/bluetooth_serial" || die
}

pkg_postinst() {
	udevcontrol reload_rules && udevtrigger

	elog
	elog "To use dial up networking you must install net-dialup/ppp."
	elog ""
	elog "Since 3.0 bluez has changed the passkey handling to use a dbus based"
	elog "API so please remember to update your /etc/bluetooth/hcid.conf."
	elog "For a password agent, there is for example net-wireless/bluez-gnome"
	elog "for gnome and net-wireless/kdebluetooth for kde."
	elog ""
	elog "Since 3.10.1 we don't install the old style daemons any more but rely"
	elog "on the new service architechture:"
	elog "	http://wiki.bluez.org/wiki/Services"
	elog ""
	elog "3.15 adds support for the audio service. See"
	elog "http://wiki.bluez.org/wiki/HOWTO/AudioDevices for configuration help."
	elog ""
	elog "Edit /etc/bluetooth/*.service to enable the services."
	elog "Use the old-daemons use flag to get the old daemons like hidd"
	elog "installed. Please note that the init script doesn't stop the old"
	elog "daemons after you update it so it's recommended to run:"
	elog "  /etc/init.d/bluetooth stop"
	elog "before updating your configuration files or you can manually kill"
	elog "the extra daemons you previously enabled in /etc/conf.d/bluetooth."
	elog ""
	elog "If you want to use rfcomm as a normal user, you need to add the user"
	elog "to the uucp group."
	elog ""
	if use old-daemons; then
		elog "The hidd init script was installed because you have the old-daemons"
		elog "use flag on. It is not started by default via udev so please add it"
		elog "to the required runleves using rc-update <runlevel> add hidd. If"
		elog "you need init scripts for the other daemons, please file requests"
		elog "to https://bugs.gentoo.org."
	else
		elog "The bluetooth service should be started automatically by udev"
		elog "when the required hardware is inserted next time."
	fi
}

[-- Attachment #3: Type: text/plain, Size: 314 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

[-- Attachment #4: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

For some reason "rtp.h" can't be found (included in
audio/pcm_bluetooth.c). This blocks my attempt to build it on gentoo
without the use of eglib.
The build goes as follows. In the source directory:

The rm -r eglib/{*.c,*.h} # make sure eglib is ignored
autoreconf -fis                  # Reconfigure
./configure --enable-inotify --enable-hal --enable-usb --enable-alsa
--enable-glib --disable-obex --enable-network --enable-serial
--enable-input --enable-audio --enable-sync --enable-hcid
--enable-configfiles --disable-initscripts --disable-pcmciarules
--enable-bccmd --enable-avctrl --enable-hid2hci --enable-dfutool
--localstatedir=/var
make       # And then make

This creates the error:
 gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I/usr/include/alsa -I../sbc
-Wall -O2 -D_FORTIFY_SOURCE=2 -MT
libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo -MD -MP -MF
.deps/libasound_module_pcm_bluetooth_la-pcm_bluetooth.Tpo -c
pcm_bluetooth.c  -fPIC -DPIC -o
.libs/libasound_module_pcm_bluetooth_la-pcm_bluetooth.o
pcm_bluetooth.c:41:17: error: rtp.h: No such file or directory
pcm_bluetooth.c: In function 'avdtp_write':
pcm_bluetooth.c:601: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: warning: left-hand operand of comma expression has
no effect
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:605: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:606: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:607: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:608: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:609: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:610: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:617: error: invalid application of 'sizeof' to
incomplete type 'struct rtp_header'
pcm_bluetooth.c:617: error: invalid application of 'sizeof' to
incomplete type 'struct rtp_payload'
pcm_bluetooth.c: In function 'bluetooth_a2dp_init':
pcm_bluetooth.c:968: error: invalid application of 'sizeof' to
incomplete type 'struct rtp_header'
pcm_bluetooth.c:968: error: invalid application of 'sizeof' to
incomplete type 'struct rtp_payload'
make[2]: *** [libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo] Error 1
make[2]: Leaving directory `/root/bluez-utils-3.21/audio'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/bluez-utils-3.21'
make: *** [all] Error 2


Any idea how to fix it?

Thanks!


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Brad Midgley]

Remy

Is this last attempt using v3.22?

Brad

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

Brad Midgley wrote:
> Remy
>
> Is this last attempt using v3.22?
>   

Just tested and the package builds. The gaps on the other hand are still
there. I can't determine what causes the gaps. I just notice that for a
few seconds the sound is gone though the clock keeps ticking. So, for
some time the sound appears to go to /dev/null.
The patch for 2.6.23 kernel does not help either. It got even worse, but
I'll stick to the current setup which is 2.6.22.
As mentioned before, I have a USB based BCM2035.
The receiver

- Bluetooth class 1: max. range: 100 m
- Bluetooth standard V1.2 (supports stereo profile A2DP)

Any thoughts?
Thanks!

Remy


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Brad Midgley]

Remy

Did you already check the link mode & policy? If you have "master" in
hcid.conf's lm setting and you take "rswitch" and "sniff" out of the
lp setting, you are forcing the pc to be master and to hopefully
behave better. (be sure to restart hcid)

Brad

On 10/26/07, Remy Bosch <reboli@hccnet.nl> wrote:
> Brad Midgley wrote:
> > Remy
> >
> > Is this last attempt using v3.22?
> >
>
> Just tested and the package builds. The gaps on the other hand are still
> there. I can't determine what causes the gaps. I just notice that for a
> few seconds the sound is gone though the clock keeps ticking. So, for
> some time the sound appears to go to /dev/null.
> The patch for 2.6.23 kernel does not help either. It got even worse, but
> I'll stick to the current setup which is 2.6.22.
> As mentioned before, I have a USB based BCM2035.
> The receiver
>
> - Bluetooth class 1: max. range: 100 m
> - Bluetooth standard V1.2 (supports stereo profile A2DP)
>
> Any thoughts?
> Thanks!
>
> Remy
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

Brad Midgley wrote:
> Remy
>
> Did you already check the link mode & policy? If you have "master" in
> hcid.conf's lm setting and you take "rswitch" and "sniff" out of the
> lp setting, you are forcing the pc to be master and to hopefully
> behave better. (be sure to restart hcid)
>   

Thanks Brad!

It helped for the largest part, though there are still some gaps. I made
sure the pairing is done once.
My config is as follows:
options {
        autoinit yes;
        security user;
        pairing once;
        passkey "Y0ur3n0tw3lc0m3";
}

device {
        name "BlueZ (%d)";
        class 0x000100;
        iscan enable; pscan enable;
        lm master;
        lp hold;
}

Any points to improve?


Remy


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Sumeet VERMA]

Hi Remy
I am also facing the same compilation problem. I saw in the mailing list you
were able to resolve it. How did you do it? 


Thanks,
Sumeet 
-----Original Message-----
From: bluez-users-bounces@lists.sourceforge.net
[mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Remy Bosch
Sent: Friday, October 26, 2007 9:50 PM
To: BlueZ users
Subject: Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

For some reason "rtp.h" can't be found (included in audio/pcm_bluetooth.c).
This blocks my attempt to build it on gentoo without the use of eglib.
The build goes as follows. In the source directory:

The rm -r eglib/{*.c,*.h} # make sure eglib is ignored
autoreconf -fis                  # Reconfigure
./configure --enable-inotify --enable-hal --enable-usb --enable-alsa
--enable-glib --disable-obex --enable-network --enable-serial --enable-input
--enable-audio --enable-sync --enable-hcid --enable-configfiles
--disable-initscripts --disable-pcmciarules --enable-bccmd --enable-avctrl
--enable-hid2hci --enable-dfutool --localstatedir=/var
make       # And then make

This creates the error:
 gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I/usr/include/alsa -I../sbc -Wall
-O2 -D_FORTIFY_SOURCE=2 -MT
libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo -MD -MP -MF
.deps/libasound_module_pcm_bluetooth_la-pcm_bluetooth.Tpo -c pcm_bluetooth.c
-fPIC -DPIC -o .libs/libasound_module_pcm_bluetooth_la-pcm_bluetooth.o
pcm_bluetooth.c:41:17: error: rtp.h: No such file or directory
pcm_bluetooth.c: In function 'avdtp_write':
pcm_bluetooth.c:601: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: warning: left-hand operand of comma expression has no
effect
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:605: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:606: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:607: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:608: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:609: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:610: error: dereferencing pointer to incomplete type
pcm_bluetooth.c:617: error: invalid application of 'sizeof' to incomplete
type 'struct rtp_header'
pcm_bluetooth.c:617: error: invalid application of 'sizeof' to incomplete
type 'struct rtp_payload'
pcm_bluetooth.c: In function 'bluetooth_a2dp_init':
pcm_bluetooth.c:968: error: invalid application of 'sizeof' to incomplete
type 'struct rtp_header'
pcm_bluetooth.c:968: error: invalid application of 'sizeof' to incomplete
type 'struct rtp_payload'
make[2]: *** [libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo] Error 1
make[2]: Leaving directory `/root/bluez-utils-3.21/audio'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/bluez-utils-3.21'
make: *** [all] Error 2


Any idea how to fix it?

Thanks!


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

Sumeet VERMA wrote:
> Hi Remy
> I am also facing the same compilation problem. I saw in the mailing list you
> were able to resolve it. How did you do it? 
>
>
> Thanks,
> Sumeet 
> -----Original Message-----
> From: bluez-users-bounces@lists.sourceforge.net
> [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Remy Bosch
> Sent: Friday, October 26, 2007 9:50 PM
> To: BlueZ users
> Subject: Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver
>
> For some reason "rtp.h" can't be found (included in audio/pcm_bluetooth.c).
> This blocks my attempt to build it on gentoo without the use of eglib.
> The build goes as follows. In the source directory:
>
> The rm -r eglib/{*.c,*.h} # make sure eglib is ignored
> autoreconf -fis                  # Reconfigure
> ./configure --enable-inotify --enable-hal --enable-usb --enable-alsa
> --enable-glib --disable-obex --enable-network --enable-serial --enable-input
> --enable-audio --enable-sync --enable-hcid --enable-configfiles
> --disable-initscripts --disable-pcmciarules --enable-bccmd --enable-avctrl
> --enable-hid2hci --enable-dfutool --localstatedir=/var
> make       # And then make
>
> This creates the error:
>  gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I/usr/include/alsa -I../sbc -Wall
> -O2 -D_FORTIFY_SOURCE=2 -MT
> libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo -MD -MP -MF
> .deps/libasound_module_pcm_bluetooth_la-pcm_bluetooth.Tpo -c pcm_bluetooth.c
> -fPIC -DPIC -o .libs/libasound_module_pcm_bluetooth_la-pcm_bluetooth.o
> pcm_bluetooth.c:41:17: error: rtp.h: No such file or directory
> pcm_bluetooth.c: In function 'avdtp_write':
> pcm_bluetooth.c:601: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: warning: left-hand operand of comma expression has no
> effect
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:605: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:606: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:607: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:608: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:609: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:610: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:617: error: invalid application of 'sizeof' to incomplete
> type 'struct rtp_header'
> pcm_bluetooth.c:617: error: invalid application of 'sizeof' to incomplete
> type 'struct rtp_payload'
> pcm_bluetooth.c: In function 'bluetooth_a2dp_init':
> pcm_bluetooth.c:968: error: invalid application of 'sizeof' to incomplete
> type 'struct rtp_header'
> pcm_bluetooth.c:968: error: invalid application of 'sizeof' to incomplete
> type 'struct rtp_payload'
> make[2]: *** [libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo] Error 1
> make[2]: Leaving directory `/root/bluez-utils-3.21/audio'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/root/bluez-utils-3.21'
> make: *** [all] Error 2
>
>
> Any idea how to fix it?
>
>   

Update to 3.22


Remy


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Sumeet VERMA]

Yeah I did that. Thanks :)


Sumeet 
-----Original Message-----
From: bluez-users-bounces@lists.sourceforge.net
[mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Remy Bosch
Sent: Tuesday, October 30, 2007 3:53 PM
To: BlueZ users
Subject: Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

Sumeet VERMA wrote:
> Hi Remy
> I am also facing the same compilation problem. I saw in the mailing 
> list you were able to resolve it. How did you do it?
>
>
> Thanks,
> Sumeet
> -----Original Message-----
> From: bluez-users-bounces@lists.sourceforge.net
> [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Remy 
> Bosch
> Sent: Friday, October 26, 2007 9:50 PM
> To: BlueZ users
> Subject: Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver
>
> For some reason "rtp.h" can't be found (included in
audio/pcm_bluetooth.c).
> This blocks my attempt to build it on gentoo without the use of eglib.
> The build goes as follows. In the source directory:
>
> The rm -r eglib/{*.c,*.h} # make sure eglib is ignored
> autoreconf -fis                  # Reconfigure
> ./configure --enable-inotify --enable-hal --enable-usb --enable-alsa 
> --enable-glib --disable-obex --enable-network --enable-serial 
> --enable-input --enable-audio --enable-sync --enable-hcid 
> --enable-configfiles --disable-initscripts --disable-pcmciarules 
> --enable-bccmd --enable-avctrl --enable-hid2hci --enable-dfutool
--localstatedir=/var
> make       # And then make
>
> This creates the error:
>  gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I/usr/include/alsa -I../sbc 
> -Wall
> -O2 -D_FORTIFY_SOURCE=2 -MT
> libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo -MD -MP -MF 
> .deps/libasound_module_pcm_bluetooth_la-pcm_bluetooth.Tpo -c 
> pcm_bluetooth.c -fPIC -DPIC -o 
> .libs/libasound_module_pcm_bluetooth_la-pcm_bluetooth.o
> pcm_bluetooth.c:41:17: error: rtp.h: No such file or directory
> pcm_bluetooth.c: In function 'avdtp_write':
> pcm_bluetooth.c:601: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: warning: left-hand operand of comma expression 
> has no effect
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:603: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:605: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:606: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:607: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:608: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:609: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:610: error: dereferencing pointer to incomplete type
> pcm_bluetooth.c:617: error: invalid application of 'sizeof' to 
> incomplete type 'struct rtp_header'
> pcm_bluetooth.c:617: error: invalid application of 'sizeof' to 
> incomplete type 'struct rtp_payload'
> pcm_bluetooth.c: In function 'bluetooth_a2dp_init':
> pcm_bluetooth.c:968: error: invalid application of 'sizeof' to 
> incomplete type 'struct rtp_header'
> pcm_bluetooth.c:968: error: invalid application of 'sizeof' to 
> incomplete type 'struct rtp_payload'
> make[2]: *** [libasound_module_pcm_bluetooth_la-pcm_bluetooth.lo] 
> Error 1
> make[2]: Leaving directory `/root/bluez-utils-3.21/audio'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/root/bluez-utils-3.21'
> make: *** [all] Error 2
>
>
> Any idea how to fix it?
>
>   

Update to 3.22


Remy


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Brad Midgley]

Remy

any remaining gaps are likely subtle timing issues in the code.

Brad

On 10/26/07, Remy Bosch <reboli@hccnet.nl> wrote:
> Brad Midgley wrote:
> > Remy
> >
> > Did you already check the link mode & policy? If you have "master" in
> > hcid.conf's lm setting and you take "rswitch" and "sniff" out of the
> > lp setting, you are forcing the pc to be master and to hopefully
> > behave better. (be sure to restart hcid)
> >
>
> Thanks Brad!
>
> It helped for the largest part, though there are still some gaps. I made
> sure the pairing is done once.
> My config is as follows:
> options {
>         autoinit yes;
>         security user;
>         pairing once;
>         passkey "Y0ur3n0tw3lc0m3";
> }
>
> device {
>         name "BlueZ (%d)";
>         class 0x000100;
>         iscan enable; pscan enable;
>         lm master;
>         lp hold;
> }
>
> Any points to improve?
>
>
> Remy
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Audio gaps with bcm2035 and Hama receiver

[Remy Bosch]

Brad Midgley wrote:
> Remy
>
> any remaining gaps are likely subtle timing issues in the code.
>   

I take it that this is mostly work in progress?
Besides, I recently ran windows, and it too had some gaps. Smaller and
fewer gaps, but still present.


Remy


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users