* wifi coexistence II
@ 2009-01-28 9:36 Paulo Bustelo Codesido
2009-02-01 16:54 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Paulo Bustelo Codesido @ 2009-01-28 9:36 UTC (permalink / raw)
To: BlueZ development
(I'm not sure I'm posting on the right way)
Hi Marcel.
As far as I know with hcitool afh I can just read the afh map...
I'm checking with this command
Set AFH Host Channel Classification (0x03|0x003f)
running every second...
but it seems to have no efect...
my problem is during inquiring....
is afh working in inquire mode?
what more can I try?
I have observed that wifi channel 3 is free from bluetooth "noise"...
if I use this channel, wifi goes well... can I trust on this?
best regards
Paulo Bustelo.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: wifi coexistence II
2009-01-28 9:36 wifi coexistence II Paulo Bustelo Codesido
@ 2009-02-01 16:54 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2009-02-01 16:54 UTC (permalink / raw)
To: Paulo Bustelo Codesido; +Cc: BlueZ development
Hi Paulo,
> As far as I know with hcitool afh I can just read the afh map...
>
> I'm checking with this command
>
> Set AFH Host Channel Classification (0x03|0x003f)
>
> running every second...
>
> but it seems to have no efect...
> my problem is during inquiring....
> is afh working in inquire mode?
> what more can I try?
you have to write your own command that actually sets the AFH map. The
hcitool only reads it.
However during inquiry you have lost anyway. It is using a fixed
frequency hopping.
Regads
Marcel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-02-01 16:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-28 9:36 wifi coexistence II Paulo Bustelo Codesido
2009-02-01 16:54 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox