* Problem in Pairing
@ 2009-02-10 5:23 Kartikey Parmar
2009-02-10 15:39 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Kartikey Parmar @ 2009-02-10 5:23 UTC (permalink / raw)
To: linux-bluetooth
Hi there,
I m using Bluez-4.27 to implement my bluetooth module which will
detect nearby bluetooth enabled device & connects with its Audio
Gateway.
Now when I attempt to connect Audio Gateway channel through my test
module it prompts me to Pair with "Bluez" on the remote device.
When I accept the same it prompts me to enter "Pass Code" to pair.
I did not ask for such passcodes in my test application...even in my
mobile phone I have not such type of setup to request for passcode.
This problem arise when I attempt to connect on the rfcomm socket
which is bind to local bluetooth adapter.
if somebody has also faced this type of problem, kindly reply me how
to solve this issue.
--
Kartikey Parmar
President AAECC
09879095390 (M)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problem in Pairing
2009-02-10 5:23 Problem in Pairing Kartikey Parmar
@ 2009-02-10 15:39 ` Marcel Holtmann
2009-02-12 9:45 ` Kartikey Parmar
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2009-02-10 15:39 UTC (permalink / raw)
To: Kartikey Parmar; +Cc: linux-bluetooth
Hi Kartikey,
> I m using Bluez-4.27 to implement my bluetooth module which will
> detect nearby bluetooth enabled device & connects with its Audio
> Gateway.
>
> Now when I attempt to connect Audio Gateway channel through my test
> module it prompts me to Pair with "Bluez" on the remote device.
>
> When I accept the same it prompts me to enter "Pass Code" to pair.
>
> I did not ask for such passcodes in my test application...even in my
> mobile phone I have not such type of setup to request for passcode.
>
> This problem arise when I attempt to connect on the rfcomm socket
> which is bind to local bluetooth adapter.
>
> if somebody has also faced this type of problem, kindly reply me how
> to solve this issue.
send in output of "hcidump -X -V". Otherwise we can't tell what is going
on.
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problem in Pairing
2009-02-10 15:39 ` Marcel Holtmann
@ 2009-02-12 9:45 ` Kartikey Parmar
0 siblings, 0 replies; 3+ messages in thread
From: Kartikey Parmar @ 2009-02-12 9:45 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel,
On Tue, Feb 10, 2009 at 9:09 PM, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Kartikey,
>
>> I m using Bluez-4.27 to implement my bluetooth module which will
>> detect nearby bluetooth enabled device & connects with its Audio
>> Gateway.
>>
>> Now when I attempt to connect Audio Gateway channel through my test
>> module it prompts me to Pair with "Bluez" on the remote device.
>>
>> When I accept the same it prompts me to enter "Pass Code" to pair.
>>
>> I did not ask for such passcodes in my test application...even in my
>> mobile phone I have not such type of setup to request for passcode.
>>
>> This problem arise when I attempt to connect on the rfcomm socket
>> which is bind to local bluetooth adapter.
>>
>> if somebody has also faced this type of problem, kindly reply me how
>> to solve this issue.
>
> send in output of "hcidump -X -V". Otherwise we can't tell what is going
> on.
>
> Regards
>
> Marcel
>
>
>
Pls find hcidump -X -V o/p below:
===========================================================
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
Read Local Name (0x03|0x0014) ncmd 1
status 0x00 name 'BlueZ'
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> HCI Event: Command Complete (0x0e) plen 10
Read BD ADDR (0x04|0x0009) ncmd 1
status 0x00 bdaddr 00:11:67:88:ED:F8
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> HCI Event: Command Complete (0x0e) plen 10
Read BD ADDR (0x04|0x0009) ncmd 1
status 0x00 bdaddr 00:11:67:88:ED:F8
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:1F:5D:B5:36:BC ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 1 bdaddr 00:1F:5D:B5:36:BC type ACL encrypt 0x00
< ACL data: handle 1 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 1 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 1 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1F:5D:B5:36:BC mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 1 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 1
Features: 0xbf 0xee 0x0f 0xc6 0x98 0x39 0x00 0x00
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1013
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 32772
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 32772
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1F:5D:B5:36:BC name 'Kartikey'
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 1013
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 26 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1008 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 26 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 329 max_retrans 0 credits 0
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xe7
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:1F:5D:B5:36:BC
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:1F:5D:B5:36:BC
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:1F:5D:B5:36:BC
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:1F:5D:B5:36:BC
> HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 1
Error: PIN or Key Missing
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:1F:5D:B5:36:BC
> HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 1
Error: PIN or Key Missing
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xcd
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 6
handle 1 packets 1
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 1 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 1 reason 0x16
Reason: Connection Terminated by Local Host
===========================================================
--
Kartikey Parmar
R&D Engineer, Matrix Telesol Pvt Ltd
09879095390 (M)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-02-12 9:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-10 5:23 Problem in Pairing Kartikey Parmar
2009-02-10 15:39 ` Marcel Holtmann
2009-02-12 9:45 ` Kartikey Parmar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox