From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
To: linux-bluetooth@vger.kernel.org
Cc: marcel@holtmann.org, gustavo@padovan.org
Subject: [PATCH 4/4] Bluetooth: Add support for Retransmission and Monitor Timers
Date: Mon, 27 Jul 2009 03:17:04 -0300 [thread overview]
Message-ID: <1248675424-20977-5-git-send-email-gustavo@las.ic.unicamp.br> (raw)
In-Reply-To: <1248675424-20977-4-git-send-email-gustavo@las.ic.unicamp.br>
L2CAP uses rentransmission and monitor timers to inquiry the other side
about unacked I-frames. After send each I-frame we (re)start the
retransmission timer, if it expires, we start a monitor timer that send a
S-frame with P bit set and wait for S-frame with F bit set.
If monitor timer expires, it try again, at a maximum of
L2CAP_DEFAULT_MAX_TX.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
---
include/net/bluetooth/bluetooth.h | 1 +
include/net/bluetooth/l2cap.h | 15 +++++-
net/bluetooth/l2cap.c | 83 +++++++++++++++++++++++++++++++++++--
3 files changed, 92 insertions(+), 7 deletions(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 65a5cf8..b8b9a84 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,7 @@ struct bt_skb_cb {
__u8 pkt_type;
__u8 incoming;
__u8 tx_seq;
+ __u8 retries;
};
#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 653c313..02871df 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -31,9 +31,9 @@
#define L2CAP_DEFAULT_FLUSH_TO 0xffff
#define L2CAP_DEFAULT_TX_WINDOW 63
#define L2CAP_DEFAULT_NUM_TO_ACK (L2CAP_DEFAULT_TX_WINDOW/5)
-#define L2CAP_DEFAULT_MAX_RECEIVE 1
-#define L2CAP_DEFAULT_RETRANS_TO 300 /* 300 milliseconds */
-#define L2CAP_DEFAULT_MONITOR_TO 1000 /* 1 second */
+#define L2CAP_DEFAULT_MAX_TX 3
+#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
+#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
@@ -320,6 +320,7 @@ struct l2cap_pinfo {
__u8 req_seq;
__u8 expected_tx_seq;
__u8 unacked_frames;
+ __u8 retry_count;
__u8 num_to_ack;
__u16 sdu_len;
__u16 partial_sdu_len;
@@ -336,6 +337,8 @@ struct l2cap_pinfo {
__le16 sport;
+ struct timer_list retrans_timer;
+ struct timer_list monitor_timer;
struct sk_buff_head tx_queue;
struct l2cap_conn *conn;
struct sock *next_c;
@@ -355,6 +358,12 @@ struct l2cap_pinfo {
#define L2CAP_CONN_SAR_SDU 0x01
#define L2CAP_CONN_UNDER_REJ 0x02
+#define L2CAP_CONN_WAIT_ACK 0x04
+
+#define __mod_retrans_timer() mod_timer(&l2cap_pi(sk)->retrans_timer, \
+ jiffies + msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
+#define __mod_monitor_timer() mod_timer(&l2cap_pi(sk)->monitor_timer, \
+ jiffies + msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
static inline int l2cap_tx_window_full(struct sock *sk)
{
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 938d6db..bcfa9b9 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1179,6 +1179,37 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l
return 0;
}
+static void l2cap_monitor_timeout(unsigned long arg)
+{
+ struct sock *sk = (void *) arg;
+ u16 control;
+
+ if (l2cap_pi(sk)->retry_count >= l2cap_pi(sk)->remote_max_tx) {
+ l2cap_send_disconn_req(l2cap_pi(sk)->conn, sk);
+ return;
+ }
+
+ l2cap_pi(sk)->retry_count++;
+ __mod_monitor_timer();
+
+ control = L2CAP_CTRL_POLL;
+ l2cap_send_sframe(l2cap_pi(sk), control);
+}
+
+static void l2cap_retrans_timeout(unsigned long arg)
+{
+ struct sock *sk = (void *) arg;
+ u16 control;
+
+ l2cap_pi(sk)->retry_count = 1;
+ __mod_monitor_timer();
+
+ l2cap_pi(sk)->conn_state |= L2CAP_CONN_WAIT_ACK;
+
+ control = L2CAP_CTRL_POLL;
+ l2cap_send_sframe(l2cap_pi(sk), control);
+}
+
static void l2cap_drop_acked_frames(struct sock *sk)
{
struct sk_buff *skb;
@@ -1193,6 +1224,9 @@ static void l2cap_drop_acked_frames(struct sock *sk)
l2cap_pi(sk)->unacked_frames--;
}
+ if (!l2cap_pi(sk)->unacked_frames)
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+
return;
}
@@ -1219,10 +1253,21 @@ static int l2cap_ertm_send(struct sock *sk)
u16 *control;
int err;
+ if (pi->conn_state & L2CAP_CONN_WAIT_ACK)
+ return 0;
+
while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk))) {
tx_seq = pi->next_tx_seq;
tx_skb = skb_clone(skb, GFP_ATOMIC);
+ if (pi->remote_max_tx &&
+ bt_cb(skb)->retries == pi->remote_max_tx) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ break;
+ }
+
+ bt_cb(skb)->retries++;
+
control = (u16 *)(skb->data + L2CAP_HDR_SIZE);
*control |= cpu_to_le16(
(pi->req_seq << L2CAP_CTRL_REQSEQ_SHIFT)
@@ -1234,6 +1279,8 @@ static int l2cap_ertm_send(struct sock *sk)
return err;
}
+ __mod_retrans_timer();
+
L2CAP_SEQ_NUM_INC(pi->next_tx_seq);
bt_cb(skb)->tx_seq = tx_seq;
@@ -1323,6 +1370,8 @@ static struct sk_buff *l2cap_create_pdu(struct sock *sk, struct msghdr *msg, siz
kfree_skb(skb);
return ERR_PTR(err);
}
+
+ bt_cb(skb)->retries = 0;
return skb;
}
@@ -2011,7 +2060,7 @@ done:
case L2CAP_MODE_ERTM:
rfc.mode = L2CAP_MODE_ERTM;
rfc.txwin_size = L2CAP_DEFAULT_TX_WINDOW;
- rfc.max_transmit = L2CAP_DEFAULT_MAX_RECEIVE;
+ rfc.max_transmit = L2CAP_DEFAULT_MAX_TX;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
@@ -2506,6 +2555,12 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
l2cap_pi(sk)->next_tx_seq = 0;
l2cap_pi(sk)->expected_ack_seq = 0;
l2cap_pi(sk)->unacked_frames = 0;
+
+ setup_timer(&l2cap_pi(sk)->retrans_timer,
+ l2cap_retrans_timeout, (unsigned long) sk);
+ setup_timer(&l2cap_pi(sk)->monitor_timer,
+ l2cap_monitor_timeout, (unsigned long) sk);
+
__skb_queue_head_init(TX_QUEUE(sk));
l2cap_chan_ready(sk);
goto unlock;
@@ -2615,6 +2670,8 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
sk->sk_shutdown = SHUTDOWN_MASK;
skb_queue_purge(TX_QUEUE(sk));
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+ del_timer(&l2cap_pi(sk)->monitor_timer);
l2cap_chan_del(sk, ECONNRESET);
bh_unlock_sock(sk);
@@ -2639,6 +2696,8 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
return 0;
skb_queue_purge(TX_QUEUE(sk));
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+ del_timer(&l2cap_pi(sk)->monitor_timer);
l2cap_chan_del(sk, 0);
bh_unlock_sock(sk);
@@ -2944,9 +3003,25 @@ static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, str
switch (rx_control & L2CAP_CTRL_SUPERVISE) {
case L2CAP_SUPER_RCV_READY:
- pi->expected_ack_seq = __get_reqseq(rx_control);
- l2cap_drop_acked_frames(sk);
- l2cap_ertm_send(sk);
+ if (rx_control & L2CAP_CTRL_POLL) {
+ u16 control = L2CAP_CTRL_FINAL;
+ l2cap_send_sframe(l2cap_pi(sk), control);
+ }
+ else if (rx_control & L2CAP_CTRL_FINAL) {
+ if (pi->conn_state & L2CAP_CONN_WAIT_ACK)
+ break;
+
+ pi->conn_state &= !L2CAP_CONN_WAIT_ACK;
+ del_timer(&pi->monitor_timer);
+
+ if (pi->unacked_frames > 0)
+ __mod_retrans_timer();
+ }
+ else {
+ pi->expected_ack_seq = __get_reqseq(rx_control);
+ l2cap_drop_acked_frames(sk);
+ l2cap_ertm_send(sk);
+ }
break;
case L2CAP_SUPER_REJECT:
--
1.6.3.3
next prev parent reply other threads:[~2009-07-27 6:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 6:17 [PATCH 0/4] Bluetooth: Patch set for ERTM Gustavo F. Padovan
2009-07-27 6:17 ` [PATCH 1/4] Bluetooth: Add initial support for ERTM packets transfers Gustavo F. Padovan
2009-07-27 6:17 ` [PATCH 2/4] Bluetooth: Add support for Segmentation and Reassembly of SDUs Gustavo F. Padovan
2009-07-27 6:17 ` [PATCH 3/4] Bluetooth: Initial support for retransmission of packets with REJ frames Gustavo F. Padovan
2009-07-27 6:17 ` Gustavo F. Padovan [this message]
2009-07-27 10:08 ` [PATCH 4/4] Bluetooth: Add support for Retransmission and Monitor Timers Marcel Holtmann
2009-07-27 10:06 ` [PATCH 3/4] Bluetooth: Initial support for retransmission of packets with REJ frames Marcel Holtmann
2009-07-27 10:05 ` [PATCH 2/4] Bluetooth: Add support for Segmentation and Reassembly of SDUs Marcel Holtmann
2009-07-28 11:30 ` Gustavo F. Padovan
2009-07-27 9:59 ` [PATCH 1/4] Bluetooth: Add initial support for ERTM packets transfers Marcel Holtmann
2009-07-28 11:24 ` Gustavo F. Padovan
[not found] <1249080824-6780-1-git-send-email-gustavo@las.ic.unicamp.br>
2009-07-31 22:53 ` [PATCH 2/4] Bluetooth: Add support for Segmentation and Reassembly of SDUs Gustavo F. Padovan
2009-07-31 22:53 ` [PATCH 3/4] Bluetooth: Initial support for retransmission of packets with REJ frames Gustavo F. Padovan
2009-07-31 22:53 ` [PATCH 4/4] Bluetooth: Add support for Retransmission and Monitor Timers Gustavo F. Padovan
-- strict thread matches above, loose matches on Subject: below --
2009-07-31 22:57 [PATCH 1/4] Bluetooth: Add initial support for ERTM packets transfers Gustavo F. Padovan
2009-07-31 22:57 ` [PATCH 2/4] Bluetooth: Add support for Segmentation and Reassembly of SDUs Gustavo F. Padovan
2009-07-31 22:57 ` [PATCH 3/4] Bluetooth: Initial support for retransmission of packets with REJ frames Gustavo F. Padovan
2009-07-31 22:57 ` [PATCH 4/4] Bluetooth: Add support for Retransmission and Monitor Timers Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248675424-20977-5-git-send-email-gustavo@las.ic.unicamp.br \
--to=gustavo@las.ic.unicamp.br \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox