How do I make the computer visible to the mobile phone?

How do I make the computer visible to the mobile phone?

[Mark Hobley]

I am using Debian (Mixed/Unstable) and I have a Nano Tiny Bluetooth adapter
that uses an Accel Semiconductor microchip. The mobile phone is visible to
the computer, but I cannot see the computer from the mobile phone. How do I
make the computer visible to my mobile phone?

I have enabled both pscan and iscan as follows:

 hciconfig hci0 piscan

The hciconfig tool reveals the following configuration:

hciconfig -a                                                       
hci0:   Type: BR/EDR  Bus: USB
        BD Address: 00:1F:81:00:01:1C  ACL MTU: 1021:4  SCO MTU: 180:1
        UP RUNNING PSCAN ISCAN 
        RX bytes:2273 acl:0 sco:0 events:59 errors:0
        TX bytes:479 acl:0 sco:0 commands:45 errors:0
        Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
        Link policy: RSWITCH HOLD SNIFF 
        Link mode: SLAVE ACCEPT 
        Name: 'Accel-OB2'
        Class: 0x4a0100
        Service Classes: Networking, Capturing, Telephony
        Device Class: Computer, Uncategorized
        HCI Version: 2.0 (0x3)  Revision: 0x44
        LMP Version: 2.0 (0x3)  Subversion: 0x3
        Manufacturer: Cambridge Silicon Radio (10)

Does anyone know what the class codes are? Should I change the class code 
in the /etc/bluetooth/main.conf configuration file?

Mark.

Re: How do I make the computer visible to the mobile phone?

[Peter Hurley]
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Re: How do I make the computer visible to the mobile phone?

[Mark Hobley]

--- On Sat, 25/6/11, Peter Hurley <peter@hurleysoftware.com> wrote:

> Did you resolve your earlier problem with timeouts?
> http://marc.info/?l=linux-bluetooth&m=130877416213307&w=2

No. I still get that error. However, once in a blue moon, my mobile phone does becomes visibile and the timeout does not occur. I then try to take advantage of this uptime, and I get stung by the invisible computer problem. I am trying to solve both issues.

Mark.

Re: How do I make the computer visible to the mobile phone?

[Mark Hobley]

--- On Sat, 25/6/11, Peter Hurley <peter@hurleysoftware.com> wrote:

> From: Peter Hurley <peter@hurleysoftware.com>
> Subject: Re: How do I make the computer visible to the mobile phone?
> To: "markhobley@yahoo.co.uk" <markhobley@yahoo.co.uk>
> Cc: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
> Date: Saturday, 25 June, 2011, 17:27
> On Sat, 2011-06-25 at 08:44 -0400,
> Mark Hobley wrote:
> > I am using Debian (Mixed/Unstable) and I have a Nano
> Tiny Bluetooth adapter
> > that uses an Accel Semiconductor microchip. The mobile
> phone is visible to
> > the computer, but I cannot see the computer from the
> mobile phone. How do I
> > make the computer visible to my mobile phone?
> 
>     sudo hciconfig hci0 piscan
> 
> Should work.
> 
> Did you resolve your earlier problem with timeouts?
> http://marc.info/?l=linux-bluetooth&m=130877416213307&w=2

> 
> In a terminal:
>     hcitool scan
> should print out the BD_ADDR of the phone
>     bluez-simple-agent hci0 BD_ADDR
> should pair.
> What happens?
> 
> The typical way to debug bluetooth issues is:
> 1. add debug flag "-d" to bluetoothd command line and then
> review system
> log
> 2. run hcidump while performing operation that's not
> working
>     sudo hcidump -tVX > filename
>    -or-
>     sudo hcidump -t --save-dump=filename
>     hcidump -tVXr filename
> Post the dump and let someone look at it.
> 
> >         Class: 0x4a0100
> >         Service Classes:
> Networking, Capturing, Telephony
> >         Device Class:
> Computer, Uncategorized
> 
> These look ok to me.
> 
> > Does anyone know what the class codes are? 
> 
> Class_of_device is defined here:
> https://www.bluetooth.org/Technical/AssignedNumbers/baseband.htm

> 
> > Should I change the class code 
> > in the /etc/bluetooth/main.conf configuration file?
> 
> No.
> 

Re: How do I make the computer visible to the mobile phone?

[Mark Hobley]

--- On Sat, 25/6/11, Peter Hurley <peter@hurleysoftware.com> wrote:

> The typical way to debug bluetooth issues is:
> 1. add debug flag "-d" to bluetoothd command line and then
> review system log

There is some strange stuff going on:

Jun 25 19:48:27 venus udevd[25268]: failed to execute '/usr/local/sbin/bluetoothd' '/usr/local/sbin/bluetoothd --udev': No such file or directory

bluetoothd is in /usr/sbin not /usr/local/sbin. I don't know how to switch that.

Jun 25 19:48:41 venus bluetoothd[916]: input-headset driver probe failed for device 00:1F:CC:C2:E4:86

I don't know what that is. I don't have a bluetooth headset. That is the address of my mobile phone.

Mark.

Re: How do I make the computer visible to the mobile phone?

[Mark Hobley]

--- On Sat, 25/6/11, Takeshi Hamasaki <hmatrjp@users.sourceforge.jp> wrote:

> I assume you've already installed bluez package.
> 
> $ bluez-test-adapter discoverable
> 
> this command returns 1 or 0.
> 
> If 1 was returned, your computer, in fact your bluetooth
> adapter, is set to discoverable from other bluetooth device, in your case, mobile phone.

Ok, this returns 1

> You can switch the status:
> $ bluez-test-adapter discoverable [on/off]

I have tried toggling this to both on and off, but the mobile phone still cannot see the computer.

My mobile phone is a Samsung J700, if that matters.