From: Santiago Carot-Nemesio <sancane@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: Santiago Carot-Nemesio <sancane@gmail.com>
Subject: [BlueZ PATCH] Health Thermometer Profile API
Date: Mon, 4 Jul 2011 11:07:38 +0200 [thread overview]
Message-ID: <1309770458-4112-1-git-send-email-sancane@gmail.com> (raw)
---
attrib/interactive.c | 2 +
doc/thermometer.txt | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 128 insertions(+), 0 deletions(-)
create mode 100644 doc/thermometer.txt
diff --git a/attrib/interactive.c b/attrib/interactive.c
index a772362..0e4bb1e 100644
--- a/attrib/interactive.c
+++ b/attrib/interactive.c
@@ -811,6 +811,8 @@ int interactive(const gchar *src, const gchar *dst, int psm)
opt_dst = g_strdup(dst);
opt_psm = psm;
+ printf("src: %s, dst: %s, psm %d\n", src, dst, psm);
+
prompt = g_string_new(NULL);
event_loop = g_main_loop_new(NULL, FALSE);
diff --git a/doc/thermometer.txt b/doc/thermometer.txt
new file mode 100644
index 0000000..6392d39
--- /dev/null
+++ b/doc/thermometer.txt
@@ -0,0 +1,126 @@
+BlueZ D-Bus Thermometer API description
+****************************************
+
+ Santiago Carot-Nemesio <sancane@gmail.com>
+
+Health Thermometer Profile hierarchy
+=====================================
+
+Service org.bluez
+Interface org.bluez.Thermometer
+Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+
+Methods void SetProperty(string name, variant value)
+
+ Changes the value of the specified property. Only
+ read-write properties can be changed. On success
+ this will emit a PropertyChanged signal.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ dict GetProperties()
+
+ Returns all properties for the interface. See the
+ Properties section for the available properties.
+
+ RegisterWatcher(object agent)
+
+ Registers a watcher to monitor scanned measurements.
+ This agent will be notified about final temperature
+ measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ UnregisterWatcher(object agent)
+
+ Unregisters a watcher.
+
+ Final and intermediate temperatures won't be notified to
+ this agent any more.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotFound
+
+ EnableIntermediateMeasurement(object agent)
+
+ Enables intermediate measurement notifications for this
+ agent if the thermometer supports it.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotSupported
+
+ DisableIntermediateMeasurement(object agent)
+
+ Disables intermediate measurement notifications for this
+ agent. It will disable notifications in the thermometer
+ when the last agent removes the watcher for intermediate
+ measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotFound
+
+Signals PropertyChanged(string name, variant value)
+
+ This signal indicates a changed value of the given
+ property.
+
+Properties boolean Intermediate [readonly]
+
+ True if the thermometer supports intermediate measurement
+ notifications.
+
+ uint16 Interval (optional) [readwrite]
+
+ The Measurement Interval defines the time (in seconds)
+ between measurements. This interval is not related to
+ the intermediate measurements and must be defined into
+ a valid range. Setting it to zero means that no periodic
+ measurements will be taken.
+
+ uint16 Maximum (optional) [readonly]
+
+ Defines the maximum value allowed for the interval
+ between periodic measurements.
+
+ uint16 Minimum (optional) [readonly]
+
+ Defines the minimum value allowed for the interval
+ between periodic measurements.
+
+
+Health Thermometer Watcher hierarchy
+====================================
+Service unique name
+Interface org.bluez.ThermometerWatcher
+Object path freely definable
+
+Methods void MeasurementReceived(dict measure)
+
+ This callback gets called when a measure has been
+ scanned in the thermometer. The Time entry in the dict
+ will be only present if the device supports storing of
+ data. The time value is expressed in seconds since epoch.
+ The value represented is (mantissa) x (10**exponent)
+ See foot note for special values when treating with
+ health devices.
+
+ Dict is defined as below:
+ {
+ "Exponent" : int8,
+ "Mantissa" : int32,
+ "Unit" : ("Celsius" or "Fahrenheit"),
+ "Time" : uint64,
+ "Type" : ("Armpit", "Body", "Ear", "Finger",
+ "Intestines", "Mouth", "Rectum", "Toe",
+ "Tympanum"),
+ "Measurement" : ("Final" or "Intermediate"),
+ }
+
+ For special cases, the exponent shall always be zero and
+ the mantissa should be one of following values:
+
+ NRes = -(2**23)
+ NaN = +(2**23-1)
+ INFINITY = (2**23-2)
+ -INFINITY = -(2**23-2)
--
1.7.6
next reply other threads:[~2011-07-04 9:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-04 9:07 Santiago Carot-Nemesio [this message]
2011-07-04 9:38 ` [BlueZ PATCH] Health Thermometer Profile API Santiago Carot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309770458-4112-1-git-send-email-sancane@gmail.com \
--to=sancane@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox