* [BlueZ PATCH] Health Thermometer Profile API
@ 2011-07-04 9:07 Santiago Carot-Nemesio
2011-07-04 9:38 ` Santiago Carot
0 siblings, 1 reply; 2+ messages in thread
From: Santiago Carot-Nemesio @ 2011-07-04 9:07 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Santiago Carot-Nemesio
---
attrib/interactive.c | 2 +
doc/thermometer.txt | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 128 insertions(+), 0 deletions(-)
create mode 100644 doc/thermometer.txt
diff --git a/attrib/interactive.c b/attrib/interactive.c
index a772362..0e4bb1e 100644
--- a/attrib/interactive.c
+++ b/attrib/interactive.c
@@ -811,6 +811,8 @@ int interactive(const gchar *src, const gchar *dst, int psm)
opt_dst = g_strdup(dst);
opt_psm = psm;
+ printf("src: %s, dst: %s, psm %d\n", src, dst, psm);
+
prompt = g_string_new(NULL);
event_loop = g_main_loop_new(NULL, FALSE);
diff --git a/doc/thermometer.txt b/doc/thermometer.txt
new file mode 100644
index 0000000..6392d39
--- /dev/null
+++ b/doc/thermometer.txt
@@ -0,0 +1,126 @@
+BlueZ D-Bus Thermometer API description
+****************************************
+
+ Santiago Carot-Nemesio <sancane@gmail.com>
+
+Health Thermometer Profile hierarchy
+=====================================
+
+Service org.bluez
+Interface org.bluez.Thermometer
+Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+
+Methods void SetProperty(string name, variant value)
+
+ Changes the value of the specified property. Only
+ read-write properties can be changed. On success
+ this will emit a PropertyChanged signal.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ dict GetProperties()
+
+ Returns all properties for the interface. See the
+ Properties section for the available properties.
+
+ RegisterWatcher(object agent)
+
+ Registers a watcher to monitor scanned measurements.
+ This agent will be notified about final temperature
+ measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ UnregisterWatcher(object agent)
+
+ Unregisters a watcher.
+
+ Final and intermediate temperatures won't be notified to
+ this agent any more.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotFound
+
+ EnableIntermediateMeasurement(object agent)
+
+ Enables intermediate measurement notifications for this
+ agent if the thermometer supports it.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotSupported
+
+ DisableIntermediateMeasurement(object agent)
+
+ Disables intermediate measurement notifications for this
+ agent. It will disable notifications in the thermometer
+ when the last agent removes the watcher for intermediate
+ measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotFound
+
+Signals PropertyChanged(string name, variant value)
+
+ This signal indicates a changed value of the given
+ property.
+
+Properties boolean Intermediate [readonly]
+
+ True if the thermometer supports intermediate measurement
+ notifications.
+
+ uint16 Interval (optional) [readwrite]
+
+ The Measurement Interval defines the time (in seconds)
+ between measurements. This interval is not related to
+ the intermediate measurements and must be defined into
+ a valid range. Setting it to zero means that no periodic
+ measurements will be taken.
+
+ uint16 Maximum (optional) [readonly]
+
+ Defines the maximum value allowed for the interval
+ between periodic measurements.
+
+ uint16 Minimum (optional) [readonly]
+
+ Defines the minimum value allowed for the interval
+ between periodic measurements.
+
+
+Health Thermometer Watcher hierarchy
+====================================
+Service unique name
+Interface org.bluez.ThermometerWatcher
+Object path freely definable
+
+Methods void MeasurementReceived(dict measure)
+
+ This callback gets called when a measure has been
+ scanned in the thermometer. The Time entry in the dict
+ will be only present if the device supports storing of
+ data. The time value is expressed in seconds since epoch.
+ The value represented is (mantissa) x (10**exponent)
+ See foot note for special values when treating with
+ health devices.
+
+ Dict is defined as below:
+ {
+ "Exponent" : int8,
+ "Mantissa" : int32,
+ "Unit" : ("Celsius" or "Fahrenheit"),
+ "Time" : uint64,
+ "Type" : ("Armpit", "Body", "Ear", "Finger",
+ "Intestines", "Mouth", "Rectum", "Toe",
+ "Tympanum"),
+ "Measurement" : ("Final" or "Intermediate"),
+ }
+
+ For special cases, the exponent shall always be zero and
+ the mantissa should be one of following values:
+
+ NRes = -(2**23)
+ NaN = +(2**23-1)
+ INFINITY = (2**23-2)
+ -INFINITY = -(2**23-2)
--
1.7.6
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [BlueZ PATCH] Health Thermometer Profile API
2011-07-04 9:07 [BlueZ PATCH] Health Thermometer Profile API Santiago Carot-Nemesio
@ 2011-07-04 9:38 ` Santiago Carot
0 siblings, 0 replies; 2+ messages in thread
From: Santiago Carot @ 2011-07-04 9:38 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Santiago Carot-Nemesio
Sorry,
2011/7/4 Santiago Carot-Nemesio <sancane@gmail.com>:
> ---
> attrib/interactive.c | 2 +
> doc/thermometer.txt | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 128 insertions(+), 0 deletions(-)
> create mode 100644 doc/thermometer.txt
>
> diff --git a/attrib/interactive.c b/attrib/interactive.c
> index a772362..0e4bb1e 100644
> --- a/attrib/interactive.c
> +++ b/attrib/interactive.c
> @@ -811,6 +811,8 @@ int interactive(const gchar *src, const gchar *dst, int psm)
> opt_dst = g_strdup(dst);
> opt_psm = psm;
>
> + printf("src: %s, dst: %s, psm %d\n", src, dst, psm);
> +
> prompt = g_string_new(NULL);
>
> event_loop = g_main_loop_new(NULL, FALSE);
> diff --git a/doc/thermometer.txt b/doc/thermometer.txt
> new file mode 100644
> index 0000000..6392d39
> --- /dev/null
> +++ b/doc/thermometer.txt
> @@ -0,0 +1,126 @@
> +BlueZ D-Bus Thermometer API description
> +****************************************
> +
> + Santiago Carot-Nemesio <sancane@gmail.com>
> +
> +Health Thermometer Profile hierarchy
> +=====================================
> +
> +Service org.bluez
> +Interface org.bluez.Thermometer
> +Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
> +
> +
> +Methods void SetProperty(string name, variant value)
> +
> + Changes the value of the specified property. Only
> + read-write properties can be changed. On success
> + this will emit a PropertyChanged signal.
> +
> + Possible Errors: org.bluez.Error.InvalidArguments
> +
> + dict GetProperties()
> +
> + Returns all properties for the interface. See the
> + Properties section for the available properties.
> +
> + RegisterWatcher(object agent)
> +
> + Registers a watcher to monitor scanned measurements.
> + This agent will be notified about final temperature
> + measurements.
> +
> + Possible Errors: org.bluez.Error.InvalidArguments
> +
> + UnregisterWatcher(object agent)
> +
> + Unregisters a watcher.
> +
> + Final and intermediate temperatures won't be notified to
> + this agent any more.
> +
> + Possible Errors: org.bluez.Error.InvalidArguments
> + org.bluez.Error.NotFound
> +
> + EnableIntermediateMeasurement(object agent)
> +
> + Enables intermediate measurement notifications for this
> + agent if the thermometer supports it.
> +
> + Possible Errors: org.bluez.Error.InvalidArguments
> + org.bluez.Error.NotSupported
> +
> + DisableIntermediateMeasurement(object agent)
> +
> + Disables intermediate measurement notifications for this
> + agent. It will disable notifications in the thermometer
> + when the last agent removes the watcher for intermediate
> + measurements.
> +
> + Possible Errors: org.bluez.Error.InvalidArguments
> + org.bluez.Error.NotFound
> +
> +Signals PropertyChanged(string name, variant value)
> +
> + This signal indicates a changed value of the given
> + property.
> +
> +Properties boolean Intermediate [readonly]
> +
> + True if the thermometer supports intermediate measurement
> + notifications.
> +
> + uint16 Interval (optional) [readwrite]
> +
> + The Measurement Interval defines the time (in seconds)
> + between measurements. This interval is not related to
> + the intermediate measurements and must be defined into
> + a valid range. Setting it to zero means that no periodic
> + measurements will be taken.
> +
> + uint16 Maximum (optional) [readonly]
> +
> + Defines the maximum value allowed for the interval
> + between periodic measurements.
> +
> + uint16 Minimum (optional) [readonly]
> +
> + Defines the minimum value allowed for the interval
> + between periodic measurements.
> +
> +
> +Health Thermometer Watcher hierarchy
> +====================================
> +Service unique name
> +Interface org.bluez.ThermometerWatcher
> +Object path freely definable
> +
> +Methods void MeasurementReceived(dict measure)
> +
> + This callback gets called when a measure has been
> + scanned in the thermometer. The Time entry in the dict
> + will be only present if the device supports storing of
> + data. The time value is expressed in seconds since epoch.
> + The value represented is (mantissa) x (10**exponent)
> + See foot note for special values when treating with
> + health devices.
> +
> + Dict is defined as below:
> + {
> + "Exponent" : int8,
> + "Mantissa" : int32,
> + "Unit" : ("Celsius" or "Fahrenheit"),
> + "Time" : uint64,
> + "Type" : ("Armpit", "Body", "Ear", "Finger",
> + "Intestines", "Mouth", "Rectum", "Toe",
> + "Tympanum"),
> + "Measurement" : ("Final" or "Intermediate"),
> + }
> +
> + For special cases, the exponent shall always be zero and
> + the mantissa should be one of following values:
> +
> + NRes = -(2**23)
> + NaN = +(2**23-1)
> + INFINITY = (2**23-2)
> + -INFINITY = -(2**23-2)
> --
> 1.7.6
>
Ignore this patch.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-07-04 9:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-04 9:07 [BlueZ PATCH] Health Thermometer Profile API Santiago Carot-Nemesio
2011-07-04 9:38 ` Santiago Carot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).