[PATCH] Bluetooth: ath3k: Add support for a new AR3012 device

[PATCH] Bluetooth: ath3k: Add support for a new AR3012 device

[Sujith Manoharan]

T:  Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e05f Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Reported-by: Joshua Richenhagen <richenhagen@gmail.com>
Signed-off-by: Sujith Manoharan <sujith@msujith.org>
---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 6bfc1bb..32582ec 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -96,6 +96,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x0cf3, 0x3121) },
 	{ USB_DEVICE(0x0cf3, 0xe003) },
+	{ USB_DEVICE(0x0489, 0xe05f) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -138,6 +139,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 30868fa..9ce82ef 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -163,6 +163,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
-- 
1.8.4.2

Re: [PATCH] Bluetooth: ath3k: Add support for a new AR3012 device

[Johan Hedberg]

Hi Sujith,

On Mon, Nov 04, 2013, Sujith Manoharan wrote:
> T:  Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  9 Spd=12   MxCh= 0
> D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0489 ProdID=e05f Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> 
> Reported-by: Joshua Richenhagen <richenhagen@gmail.com>
> Signed-off-by: Sujith Manoharan <sujith@msujith.org>
> ---
>  drivers/bluetooth/ath3k.c | 2 ++
>  drivers/bluetooth/btusb.c | 1 +
>  2 files changed, 3 insertions(+)

Applied to bluetooth-next. Thanks.

Johan