Re: [Bluez-users] Apple bluetooth mouse

[Elimar Riesebieter <riesebie@lxtec.de>]

[-- Attachment #1: Type: text/plain, Size: 1425 bytes --]

On Tue, 30 Dec 2003 the mental interface of 
Marcel Holtmann told:

> Hi Elimar,
> 
> > Neither OHCI nor EHCI was enabled in my kernel. Changed that and the
> > mouse works like a charm at console and X ;-)
> > 
> > Thank you for that hint!
> > 
> > But anyway: hcitool inq like shown at
> > http://www.holtmann.org/linux/bluetooth/hid.html tells:
> > Inquiring ...
> > Inquiry failed.: No such device
> 
> 	T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> 	D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> 	P:  Vendor=05ac ProdID=1000 Rev= 9.01
> 	C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
> 	I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
> 	E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> 	I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
> 	E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> 
> this looks like a Bluetooth HID proxy device from CSR. You can use the
> hid2hci program to switch it into HCI mode. However it seems that Apple
> is using its own vendor id, so you must change this in the source code.

Where in the source code? This should be a useful info for Benjamin
Herrenschmidt as well.

I found hid2hci In the CVS sourcecode from bluez-utils2.
hid2hci -(0|1) gives me 
No devices in H(CI|DI) mode found ;-(

HANN

Elimar

-- 
  Learned men are the cisterns of knowledge, 
  not the fountainheads ;-)

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]