[Bluez-users] Socket G card newbie Q

[John McCorquodale <mcq@cacr.caltech.edu>]

Hi, y'all,

I'm trying to get my socket CF G card to work in my pcmcia slot.  Just trying
to get to the point where I can do an hci scan.  From what I've been able to
glean from the list and howtos, this is my approach:

  1. pcmcia-cs loads G card as serial_cs (minicom on ttyS0 shows a packet
     coming in every half-second or so, but I don't know what baud rate
     I should be using, nor what HCI packets look like, so I can only assume
     that it's correct)

  2. All bluez support built in to kernel (2.6.3-mm2, 2.4.25, 2.4.20 all
     tried with same results)

  3. hciattach ttyS0 csr 230400
     Responds: "Initialization timed out."

Anybody care to kick me a step further in the right direction on this sunny
southern California afternoon?

Thanks,

-mcq


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users