* [Bluez-users] Some BT problems connecting between Ipaq and USB dongle
@ 2004-08-05 0:14 wim delvaux
2004-08-05 1:25 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: wim delvaux @ 2004-08-05 0:14 UTC (permalink / raw)
To: bluez-users
Am I having problems setting up a bluetooth connection between my Ipaq 3870
Fam 0.7.2 and my debian sid desktop.
I tried
clean reboot.
Server runs pand --listen --role NAP
client
pand --search --cache --persist
RESULT
I do see a bluepin dialog on my desktop, I see the PIN code being sent
but then I get as result
> HCI Event: PIN Code Request(0x16) plen 6
. . . . . .
> HCI Event: Connect Complete(0x03) plen 11
. ) . . . . . . . . .
< HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
. . . . . . . 1 2 3 4 . . . . . . . . .
. . .
> HCI Event: Command Complete(0x0e) plen 10
. . . . . . . . . .
> HCI Event: Connect Request(0x04) plen 10
. . . . . . . . . .
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
. . . . . . .
> HCI Event: Command Status(0x0f) plen 4
. . . .
the PIN code is correct.
Normally should also get a dialog box on the Ipaq for the same PIN code
I tried also running sdptool
Then I also get the PIN code dialog box but with following sequence
and output of command
OUTPUT
Inquiring ...
Failed to connect to SDP server on 00:60:57:35:81:B6: Permission denied
Failed to connect to SDP server on 00:60:57:02:71:A2: Permission denied
DUMP
> HCI Event: Connect Request(0x04) plen 10
. . . . . . . . . .
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
. . . . . . .
> HCI Event: Command Status(0x0f) plen 4
. . . .
> HCI Event: Link Key Request(0x17) plen 6
. . . . . .
< HCI Command: Link Key Request Negative Reply(0x01|0x000c) plen 6
. . . . . .
> HCI Event: Role Change(0x12) plen 8
. . . . . . . .
> HCI Event: Command Complete(0x0e) plen 10
. . . . . . . . . .
> HCI Event: PIN Code Request(0x16) plen 6
. . . . . .
> HCI Event: Connect Complete(0x03) plen 11
. ( . . . . . . . . .
< HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
. . . . . . . 1 2 3 4 . . . . . . . . .
. . .
> HCI Event: Command Complete(0x0e) plen 10
. . . . . . . . . .
or RAW
> 04 04 0A 96 85 0D C7 02 00 12 01 12 01
< 01 09 04 07 96 85 0D C7 02 00 00
> 04 0F 04 00 01 09 04
> 04 17 06 96 85 0D C7 02 00
< 01 0C 04 06 96 85 0D C7 02 00
> 04 12 08 00 96 85 0D C7 02 00 00
> 04 0E 0A 01 0C 04 00 96 85 0D C7 02 00
> 04 16 06 96 85 0D C7 02 00
> 04 03 0B 18 28 00 96 85 0D C7 02 00 01 00
< 01 0D 04 17 96 85 0D C7 02 00 04 31 32 33 34 00 00 00 00 00
00 00 00 00 00 00 00
> 04 0E 0A 01 0D 04 02 96 85 0D C7 02 00
hcitool properly scans the devices.
pinging yiels (with dialog )
~ # l2ping 00:60:57:02:71:A2
Can't connect.: Permission denied
HELP !
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] Some BT problems connecting between Ipaq and USB dongle
2004-08-05 0:14 [Bluez-users] Some BT problems connecting between Ipaq and USB dongle wim delvaux
@ 2004-08-05 1:25 ` Marcel Holtmann
2004-08-05 6:50 ` wim delvaux
[not found] ` <200408050840.40598.wim.delvaux@adaptiveplanet.com>
0 siblings, 2 replies; 5+ messages in thread
From: Marcel Holtmann @ 2004-08-05 1:25 UTC (permalink / raw)
To: wim delvaux; +Cc: BlueZ Mailing List
Hi Wim,
> Am I having problems setting up a bluetooth connection between my Ipaq 3870
> Fam 0.7.2 and my debian sid desktop.
>
> I tried
>
> clean reboot.
>
> Server runs pand --listen --role NAP
>
> client
>
> pand --search --cache --persist
>
> RESULT
>
> I do see a bluepin dialog on my desktop, I see the PIN code being sent
> but then I get as result
>
> > HCI Event: PIN Code Request(0x16) plen 6
> . . . . . .
> > HCI Event: Connect Complete(0x03) plen 11
> . ) . . . . . . . . .
> < HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
> . . . . . . . 1 2 3 4 . . . . . . . . .
> . . .
> > HCI Event: Command Complete(0x0e) plen 10
> . . . . . . . . . .
> > HCI Event: Connect Request(0x04) plen 10
> . . . . . . . . . .
> < HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> . . . . . . .
> > HCI Event: Command Status(0x0f) plen 4
> . . . .
>
> the PIN code is correct.
> Normally should also get a dialog box on the Ipaq for the same PIN code
>
> I tried also running sdptool
>
> Then I also get the PIN code dialog box but with following sequence
> and output of command
>
> OUTPUT
> Inquiring ...
> Failed to connect to SDP server on 00:60:57:35:81:B6: Permission denied
> Failed to connect to SDP server on 00:60:57:02:71:A2: Permission denied
>
> DUMP
> > HCI Event: Connect Request(0x04) plen 10
> . . . . . . . . . .
> < HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> . . . . . . .
> > HCI Event: Command Status(0x0f) plen 4
> . . . .
> > HCI Event: Link Key Request(0x17) plen 6
> . . . . . .
> < HCI Command: Link Key Request Negative Reply(0x01|0x000c) plen 6
> . . . . . .
> > HCI Event: Role Change(0x12) plen 8
> . . . . . . . .
> > HCI Event: Command Complete(0x0e) plen 10
> . . . . . . . . . .
> > HCI Event: PIN Code Request(0x16) plen 6
> . . . . . .
> > HCI Event: Connect Complete(0x03) plen 11
> . ( . . . . . . . . .
> < HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
> . . . . . . . 1 2 3 4 . . . . . . . . .
> . . .
> > HCI Event: Command Complete(0x0e) plen 10
> . . . . . . . . . .
>
> or RAW
>
> > 04 04 0A 96 85 0D C7 02 00 12 01 12 01
> < 01 09 04 07 96 85 0D C7 02 00 00
> > 04 0F 04 00 01 09 04
> > 04 17 06 96 85 0D C7 02 00
> < 01 0C 04 06 96 85 0D C7 02 00
> > 04 12 08 00 96 85 0D C7 02 00 00
> > 04 0E 0A 01 0C 04 00 96 85 0D C7 02 00
> > 04 16 06 96 85 0D C7 02 00
> > 04 03 0B 18 28 00 96 85 0D C7 02 00 01 00
> < 01 0D 04 17 96 85 0D C7 02 00 04 31 32 33 34 00 00 00 00 00
> 00 00 00 00 00 00 00
> > 04 0E 0A 01 0D 04 02 96 85 0D C7 02 00
>
> hcitool properly scans the devices.
>
> pinging yiels (with dialog )
>
> ~ # l2ping 00:60:57:02:71:A2
> Can't connect.: Permission denied
looks like one of your devices is in security mode 3. It is not a good
idea to use this security mode.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Bluez-users] Some BT problems connecting between Ipaq and USB dongle
2004-08-05 1:25 ` Marcel Holtmann
@ 2004-08-05 6:50 ` wim delvaux
2004-08-05 9:51 ` Marcel Holtmann
[not found] ` <200408050840.40598.wim.delvaux@adaptiveplanet.com>
1 sibling, 1 reply; 5+ messages in thread
From: wim delvaux @ 2004-08-05 6:50 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
BTW,
I have this acer bt500 that from time to time does not 'accept addresses'.
Is there any way to fix this problem (running 2.6.7-rc3 of kernel)
is there a better USB dongle that does not have this problem
W
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Bluez-users] Some BT problems connecting between Ipaq and USB dongle
2004-08-05 6:50 ` wim delvaux
@ 2004-08-05 9:51 ` Marcel Holtmann
0 siblings, 0 replies; 5+ messages in thread
From: Marcel Holtmann @ 2004-08-05 9:51 UTC (permalink / raw)
To: wim delvaux; +Cc: BlueZ Mailing List
Hi Wim,
> I have this acer bt500 that from time to time does not 'accept addresses'.
>
> Is there any way to fix this problem (running 2.6.7-rc3 of kernel)
> is there a better USB dongle that does not have this problem
we know, but you are asking the wrong guys. This is a USB related
problem and the USB guys must workaround it.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <200408050840.40598.wim.delvaux@adaptiveplanet.com>]
* Re: [Bluez-users] Some BT problems connecting between Ipaq and USB dongle
[not found] ` <200408050840.40598.wim.delvaux@adaptiveplanet.com>
@ 2004-08-05 9:53 ` Marcel Holtmann
0 siblings, 0 replies; 5+ messages in thread
From: Marcel Holtmann @ 2004-08-05 9:53 UTC (permalink / raw)
To: wim delvaux; +Cc: BlueZ Mailing List
Hi Wim,
> > looks like one of your devices is in security mode 3. It is not a good
> > idea to use this security mode.
>
> Donno ... where could I have set this up ?
look at the line with "auth enable". This is security mode 3. Leave it
disabled and let the PAN server trigger auth if you need it.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-08-05 9:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-05 0:14 [Bluez-users] Some BT problems connecting between Ipaq and USB dongle wim delvaux
2004-08-05 1:25 ` Marcel Holtmann
2004-08-05 6:50 ` wim delvaux
2004-08-05 9:51 ` Marcel Holtmann
[not found] ` <200408050840.40598.wim.delvaux@adaptiveplanet.com>
2004-08-05 9:53 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox