public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] USB/bluetooth crash at boot-time
@ 2004-09-14 18:38 Charles Bueche
  2004-09-14 19:02 ` Marcel Holtmann
  0 siblings, 1 reply; 3+ messages in thread
From: Charles Bueche @ 2004-09-14 18:38 UTC (permalink / raw)
  To: bluez-users

[-- Attachment #1: Type: text/plain, Size: 3105 bytes --]

Hello,

I have a Dell Inspiron 8600, with the integrated bluetooth module, which
I see as usb device. I run gentoo, kernel 2.6.7-gentoo-r11
(sys-kernel/gentoo-dev-sources).

lspci -v -v -v result is attached, the full boot log as well.

I can enable/disable the wireless parts (bluetooth and IPW2200 mini-pci
card) using a hotkey (Fn-F2). A blue led shows the status.

If I boot with it disabled (eg I hotkey it to off during grub
countdown), and I enable it afterwards, everything is OK, I can use
bluez with hci and friends fine.

If I boot it with the wireless stuff enabled, I get a sort of oops,
below is the partial log, see attachment for unwrapped log.

I suspect either bluez or USB subsystems, but you guys will probably be
able to help me. The whole things appeared a few kernel version ago, but
I can reproduce this history. Thanks for hints.

Regards,
Charles

kernel: Bluetooth: HCI USB driver ver 2.7
kernel: f8f128bf
kernel: PREEMPT
kernel: Modules linked in: hci_usb ehci_hcd uhci_hcd evdev snd_intel8x0
snd_ac97_codec gameport snd_mpu401_uart snd_rawmidi snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm
snd_page_alloc snd_timer snd_mixer_oss snd soundcore usbcore hidp l2cap
bluetooth ircomm_tty ircomm irtty_sir sir_dev irda speedstep_centrino
freq_table thermal processor fan button battery ac b44 ide_cd sr_mod
cdrom kernel: CPU:    0
kernel: EIP:    0060:[<f8f128bf>]    Not tainted
kernel: EFLAGS: 00010296   (2.6.7-gentoo-r11)
kernel: EIP is at hci_usb_close+0xf/0x60 [hci_usb]
kernel: eax: f7fcf778   ebx: 00000000   ecx: f7c16df4   edx: f7fcf788
kernel: esi: 00000000   edi: 00000002   ebp: f8f152c0   esp: f76c5e3c
kernel: ds: 007b   es: 007b   ss: 0068
kernel: Process modprobe (pid: 6936, threadinfo=f76c4000 task=f7bbecf0)
kernel: Stack: 00000083 f77ff9c0 00000000 f8f13b0f 00000000 f7fcf778
f8f153e0 f7fcf778 kernel:        f8f153e0 f8ed7106 f7fcf778 f7fcf778
f7696c74 f7fcf788 f8f15400 c0273106 kernel:        f7fcf788 f7fcf7b0
f7fcf788 f77ff9c0 f8ed73b0 f7fcf788 00000005 f8f13a17 kernel: Call
Trace: kernel:  [<f8f13b0f>] hci_usb_disconnect+0x2f/0xa0 [hci_usb]
kernel:  [<f8ed7106>] usb_unbind_interface+0x76/0x80 [usbcore]
kernel:  [<c0273106>] device_release_driver+0x66/0x70
kernel:  [<f8ed73b0>] usb_driver_release_interface+0x50/0x60 [usbcore]
kernel:  [<f8f13a17>] hci_usb_probe+0x387/0x450 [hci_usb]
kernel:  [<c0182b10>] init_dir+0x0/0x20
kernel:  [<f8ed707d>] usb_probe_interface+0x5d/0x70 [usbcore]
kernel:  [<c0272f2f>] bus_match+0x3f/0x70
kernel:  [<c027305c>] driver_attach+0x5c/0xa0
kernel:  [<c0273321>] bus_add_driver+0x91/0xb0
kernel:  [<c02737af>] driver_register+0x2f/0x40
kernel:  [<c0119741>] printk+0x111/0x170
kernel:  [<f8ed714e>] usb_register+0x3e/0xa0 [usbcore]
kernel:  [<f8f25028>] hci_usb_init+0x28/0x4f [hci_usb]
kernel:  [<c012ef69>] sys_init_module+0x119/0x230
kernel:  [<c010610b>] syscall_call+0x7/0xb
kernel:
kernel: Code: 8b b3 20 01 00 00 0f ba 73 14 02 19 c0 85 c0 74 29 9c 58
fa usb.agent[6825]: ... can't load module hci_usb


-- 
Charles Bueche <charles@bueche.ch>
sand, snow, wave, wind and net -surfer

[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 9164 bytes --]

0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
	Subsystem: Dell: Unknown device 016a
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable)
	Capabilities: [e4] #09 [4104]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fc000000-fdffffff
	Prefetchable memory behind bridge: d0000000-dfffffff
	Expansion ROM at 0000c000 [disabled] [size=4K]
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at bf80 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at bf40 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at bf20 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: Dell: Unknown device 016a
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at f4fffc00 (32-bit, non-prefetchable)
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] #0a [2080]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000efff
	Memory behind bridge: f6000000-fbffffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at bfa0 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 7
	Region 0: I/O ports at b800
	Region 1: I/O ports at bc40 [size=64]
	Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 031b (rev a1) (prog-if 00 [VGA])
	Subsystem: Dell: Unknown device 019c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=80000000]
	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Expansion ROM at 00020000 [disabled]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

0000:02:00.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
	Subsystem: Dell: Unknown device 8127
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at faffe000 (32-bit, non-prefetchable)
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
	Subsystem: Dell: Unknown device 016a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 10
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 40001000 (32-bit, non-prefetchable)
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 40400000-407ff000 (prefetchable)
	Memory window 1: 40800000-40bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:02:01.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller (prog-if 10 [OHCI])
	Subsystem: Dell: Unknown device 016a
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at faffd800 (32-bit, non-prefetchable)
	Region 1: Memory at faff8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+

0000:02:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
	Subsystem: Intel Corp.: Unknown device 2701
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (750ns min, 6000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 7
	Region 0: Memory at faffc000 (32-bit, non-prefetchable)
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-


[-- Attachment #3: messages --]
[-- Type: application/octet-stream, Size: 22142 bytes --]

Sep 14 07:33:39 bluez syslogd 1.4.1: restart.
Sep 14 07:33:40 bluez kernel: klogd 1.4.1, log source = /proc/kmsg started.
Sep 14 07:33:40 bluez kernel: Cannot find map file.
Sep 14 07:33:40 bluez kernel: Linux version 2.6.7-gentoo-r11 (root@bluez) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 Mon Aug 2 22:34:17 MEST 2004
Sep 14 07:33:40 bluez kernel: BIOS-provided physical RAM map:
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
Sep 14 07:33:40 bluez kernel:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Sep 14 07:33:40 bluez kernel: 127MB HIGHMEM available.
Sep 14 07:33:40 bluez kernel: 896MB LOWMEM available.
Sep 14 07:33:40 bluez kernel: On node 0 totalpages: 262062
Sep 14 07:33:40 bluez kernel:   DMA zone: 4096 pages, LIFO batch:1
Sep 14 07:33:40 bluez kernel:   Normal zone: 225280 pages, LIFO batch:16
Sep 14 07:33:40 bluez kernel:   HighMem zone: 32686 pages, LIFO batch:7
Sep 14 07:33:40 bluez kernel: DMI 2.3 present.
Sep 14 07:33:40 bluez kernel: ACPI: RSDP (v000 DELL                                      ) @ 0x000fdf00
Sep 14 07:33:40 bluez kernel: ACPI: RSDT (v001 DELL    CPi R   0x27d40708 ASL  0x00000061) @ 0x3fff0000
Sep 14 07:33:40 bluez kernel: ACPI: FADT (v001 DELL    CPi R   0x27d40708 ASL  0x00000061) @ 0x3fff0400
Sep 14 07:33:40 bluez kernel: ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
Sep 14 07:33:40 bluez kernel: Built 1 zonelists
Sep 14 07:33:40 bluez kernel: Kernel command line: root=/dev/hda5 devfs=mount vga=791 video=vesa:1024x768@70
Sep 14 07:33:40 bluez kernel: Initializing CPU#0
Sep 14 07:33:40 bluez kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Sep 14 07:33:40 bluez kernel: Detected 1399.185 MHz processor.
Sep 14 07:33:40 bluez kernel: Using tsc for high-res timesource
Sep 14 07:33:40 bluez kernel: Console: colour dummy device 80x25
Sep 14 07:33:40 bluez kernel: Memory: 1035596k/1048248k available (2167k kernel code, 11728k reserved, 797k data, 140k init, 130744k highmem)
Sep 14 07:33:40 bluez kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Sep 14 07:33:40 bluez kernel: Calibrating delay loop... 2768.89 BogoMIPS
Sep 14 07:33:40 bluez kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 14 07:33:40 bluez kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 14 07:33:40 bluez kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Sep 14 07:33:40 bluez kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 14 07:33:40 bluez kernel: CPU: L2 cache: 1024K
Sep 14 07:33:40 bluez kernel: Intel machine check architecture supported.
Sep 14 07:33:40 bluez kernel: Intel machine check reporting enabled on CPU#0.
Sep 14 07:33:40 bluez kernel: CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Sep 14 07:33:40 bluez kernel: Enabling fast FPU save and restore... done.
Sep 14 07:33:40 bluez kernel: Enabling unmasked SIMD FPU exception support... done.
Sep 14 07:33:40 bluez kernel: Checking 'hlt' instruction... OK.
Sep 14 07:33:40 bluez kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Sep 14 07:33:40 bluez kernel: Freeing initrd memory: 38k freed
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 16
Sep 14 07:33:40 bluez kernel: PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
Sep 14 07:33:40 bluez kernel: PCI: Using configuration type 1
Sep 14 07:33:40 bluez kernel: mtrr: v2.0 (20020519)
Sep 14 07:33:40 bluez kernel: ACPI: Subsystem revision 20040326
Sep 14 07:33:40 bluez kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Sep 14 07:33:40 bluez kernel: ACPI: Interpreter enabled
Sep 14 07:33:40 bluez kernel: ACPI: Using PIC for interrupt routing
Sep 14 07:33:40 bluez kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Sep 14 07:33:40 bluez kernel: PCI: Probing PCI hardware (bus 00)
Sep 14 07:33:40 bluez kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Sep 14 07:33:40 bluez kernel: PCI: Transparent bridge - 0000:00:1e.0
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep 14 07:33:40 bluez kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 14 07:33:40 bluez kernel: PnPBIOS: Scanning system for PnP BIOS support...
Sep 14 07:33:40 bluez kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
Sep 14 07:33:40 bluez kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x800-0x85f has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x860-0x87f has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x880-0x8bf has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x8c0-0x8ff has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0x900-0x97f has been reserved
Sep 14 07:33:40 bluez kernel: pnp: 00:01: ioport range 0xf400-0xf4fe has been reserved
Sep 14 07:33:40 bluez kernel: PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
Sep 14 07:33:40 bluez kernel: SCSI subsystem initialized
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Sep 14 07:33:40 bluez kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
Sep 14 07:33:40 bluez kernel: PCI: Using ACPI for IRQ routing
Sep 14 07:33:40 bluez kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf8807000, size 3072k
Sep 14 07:33:40 bluez kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
Sep 14 07:33:40 bluez kernel: vesafb: protected mode interface info at c000:e560
Sep 14 07:33:40 bluez kernel: vesafb: scrolling: redraw
Sep 14 07:33:40 bluez kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Sep 14 07:33:40 bluez kernel: fb0: VESA VGA frame buffer device
Sep 14 07:33:40 bluez kernel: Machine check exception polling timer started.
Sep 14 07:33:40 bluez kernel: highmem bounce pool size: 64 pages
Sep 14 07:33:40 bluez kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Sep 14 07:33:40 bluez kernel: devfs: boot_options: 0x1
Sep 14 07:33:40 bluez kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 14 07:33:40 bluez kernel: Initializing Cryptographic API
Sep 14 07:33:40 bluez kernel: mice: PS/2 mouse device common for all mice
Sep 14 07:33:40 bluez kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 14 07:33:40 bluez kernel: input: PS/2 Generic Mouse on isa0060/serio1
Sep 14 07:33:40 bluez kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 14 07:33:40 bluez kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Sep 14 07:33:40 bluez kernel: bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... silentjpeg size 19730 bytes, found (1024x768, 19600 bytes, v3).
Sep 14 07:33:40 bluez kernel: Console: switching to colour frame buffer device 128x48
Sep 14 07:33:40 bluez kernel: Real Time Clock Driver v1.12
Sep 14 07:33:40 bluez kernel: Non-volatile memory driver v1.2
Sep 14 07:33:40 bluez kernel: Linux agpgart interface v0.100 (c) Dave Jones
Sep 14 07:33:40 bluez kernel: agpgart: Detected an Intel 855PM Chipset.
Sep 14 07:33:40 bluez kernel: agpgart: Maximum main memory to use for agp memory: 941M
Sep 14 07:33:40 bluez kernel: agpgart: AGP aperture is 128M @ 0xe0000000
Sep 14 07:33:40 bluez kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Sep 14 07:33:40 bluez kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 14 07:33:40 bluez kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 14 07:33:40 bluez kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Sep 14 07:33:40 bluez kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep 14 07:33:40 bluez kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 14 07:33:40 bluez kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1
Sep 14 07:33:40 bluez kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Sep 14 07:33:40 bluez kernel: ICH4: chipset revision 1
Sep 14 07:33:40 bluez kernel: ICH4: not 100%% native mode: will probe irqs later
Sep 14 07:33:40 bluez kernel:     ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
Sep 14 07:33:40 bluez kernel:     ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Sep 14 07:33:40 bluez kernel: hda: IC25N080ATMR04-0, ATA DISK drive
Sep 14 07:33:40 bluez kernel: Using anticipatory io scheduler
Sep 14 07:33:40 bluez kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 14 07:33:40 bluez kernel: hdc: _NEC DVD+RW ND-5100A, ATAPI CD/DVD-ROM drive
Sep 14 07:33:40 bluez kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 14 07:33:40 bluez kernel: hda: max request size: 1024KiB
Sep 14 07:33:40 bluez kernel: hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
Sep 14 07:33:40 bluez kernel:  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 2
Sep 14 07:33:40 bluez kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Sep 14 07:33:40 bluez kernel: TCP: Hash tables configured (established 262144 bind 65536)
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 1
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 17
Sep 14 07:33:40 bluez kernel: ACPI: (supports S0 S1 S3 S4 S4bios S5)
Sep 14 07:33:40 bluez kernel: BIOS EDD facility v0.15 2004-May-17, 1 devices found
Sep 14 07:33:40 bluez kernel: RAMDISK: Couldn't find valid RAM disk image starting at 0.
Sep 14 07:33:40 bluez kernel: kjournald starting.  Commit interval 5 seconds
Sep 14 07:33:40 bluez kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 14 07:33:40 bluez kernel: VFS: Mounted root (ext3 filesystem) readonly.
Sep 14 07:33:40 bluez kernel: Mounted devfs on /dev
Sep 14 07:33:40 bluez kernel: Freeing unused kernel memory: 140k freed
Sep 14 07:33:40 bluez kernel: Adding 1108444k swap on /dev/hda7.  Priority:-1 extents:1
Sep 14 07:33:40 bluez kernel: EXT3 FS on hda5, internal journal
Sep 14 07:33:40 bluez kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Sep 14 07:33:40 bluez kernel: Uniform CD-ROM driver Revision: 3.20
Sep 14 07:33:40 bluez kernel: b44.c:v0.94 (May 4, 2004)
Sep 14 07:33:40 bluez kernel: eth0: Broadcom 4400 10/100BaseT Ethernet 00:0d:56:34:1f:3d
Sep 14 07:33:40 bluez kernel: ACPI: AC Adapter [AC] (on-line)
Sep 14 07:33:40 bluez kernel: ACPI: Battery Slot [BAT0] (battery present)
Sep 14 07:33:40 bluez kernel: ACPI: Battery Slot [BAT1] (battery absent)
Sep 14 07:33:40 bluez kernel: ACPI: Lid Switch [LID]
Sep 14 07:33:40 bluez kernel: ACPI: Power Button (CM) [PBTN]
Sep 14 07:33:40 bluez kernel: ACPI: Sleep Button (CM) [SBTN]
Sep 14 07:33:40 bluez kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
Sep 14 07:33:40 bluez kernel: ACPI: Thermal Zone [THM] (37 C)
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 23
Sep 14 07:33:40 bluez kernel: IrCOMM protocol (Dag Brattli)
Sep 14 07:33:40 bluez kernel: Bluetooth: Core ver 2.6
Sep 14 07:33:40 bluez kernel: NET: Registered protocol family 31
Sep 14 07:33:40 bluez kernel: Bluetooth: HCI device and connection manager initialized
Sep 14 07:33:40 bluez kernel: Bluetooth: HCI socket layer initialized
Sep 14 07:33:40 bluez kernel: Bluetooth: L2CAP ver 2.3
Sep 14 07:33:40 bluez kernel: Bluetooth: L2CAP socket layer initialized
Sep 14 07:33:40 bluez kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.0-mh1
Sep 14 07:33:40 bluez kernel: ReiserFS: hda8: found reiserfs format "3.6" with standard journal
Sep 14 07:33:40 bluez kernel: ReiserFS: hda8: using ordered data mode
Sep 14 07:33:40 bluez kernel: ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Sep 14 07:33:40 bluez kernel: ReiserFS: hda8: checking transaction log (hda8)
Sep 14 07:33:40 bluez kernel: ReiserFS: hda8: Using r5 hash to sort names
Sep 14 07:33:40 bluez kernel: kjournald starting.  Commit interval 5 seconds
Sep 14 07:33:40 bluez kernel: EXT3 FS on hda9, internal journal
Sep 14 07:33:40 bluez kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 14 07:33:40 bluez kernel: usbcore: registered new driver usbfs
Sep 14 07:33:40 bluez kernel: usbcore: registered new driver hub
Sep 14 07:33:40 bluez kernel: intel8x0_measure_ac97_clock: measured 49476 usecs
Sep 14 07:33:40 bluez kernel: intel8x0: clocking to 48000
Sep 14 07:33:40 bluez kernel: USB Universal Host Controller Interface driver v2.2
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0000bf80
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Sep 14 07:33:40 bluez kernel: hub 1-0:1.0: USB hub found
Sep 14 07:33:40 bluez kernel: hub 1-0:1.0: 2 ports detected
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 0000bf40
Sep 14 07:33:40 bluez kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Sep 14 07:33:40 bluez kernel: hub 2-0:1.0: USB hub found
Sep 14 07:33:40 bluez kernel: hub 2-0:1.0: 2 ports detected
Sep 14 07:33:41 bluez kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
Sep 14 07:33:41 bluez kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0000bf20
Sep 14 07:33:41 bluez kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Sep 14 07:33:41 bluez kernel: hub 3-0:1.0: USB hub found
Sep 14 07:33:41 bluez kernel: hub 3-0:1.0: 2 ports detected
Sep 14 07:33:41 bluez kernel: usb 1-2: new full speed USB device using address 2
Sep 14 07:33:42 bluez kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
Sep 14 07:33:42 bluez kernel: ehci_hcd 0000:00:1d.7: irq 11, pci mem f8ec2c00
Sep 14 07:33:42 bluez kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Sep 14 07:33:42 bluez kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Sep 14 07:33:42 bluez kernel: hub 4-0:1.0: USB hub found
Sep 14 07:33:42 bluez kernel: hub 4-0:1.0: 6 ports detected
Sep 14 07:33:42 bluez kernel: Bluetooth: HCI USB driver ver 2.7
Sep 14 07:33:42 bluez kernel: f8f128bf
Sep 14 07:33:42 bluez kernel: PREEMPT 
Sep 14 07:33:42 bluez kernel: Modules linked in: hci_usb ehci_hcd uhci_hcd evdev snd_intel8x0 snd_ac97_codec gameport snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore usbcore hidp l2cap bluetooth ircomm_tty ircomm irtty_sir sir_dev irda speedstep_centrino freq_table thermal processor fan button battery ac b44 ide_cd sr_mod cdrom
Sep 14 07:33:42 bluez kernel: CPU:    0
Sep 14 07:33:42 bluez kernel: EIP:    0060:[<f8f128bf>]    Not tainted
Sep 14 07:33:42 bluez kernel: EFLAGS: 00010296   (2.6.7-gentoo-r11) 
Sep 14 07:33:42 bluez kernel: EIP is at hci_usb_close+0xf/0x60 [hci_usb]
Sep 14 07:33:42 bluez kernel: eax: f7fcf778   ebx: 00000000   ecx: f7c16df4   edx: f7fcf788
Sep 14 07:33:42 bluez kernel: esi: 00000000   edi: 00000002   ebp: f8f152c0   esp: f76c5e3c
Sep 14 07:33:42 bluez kernel: ds: 007b   es: 007b   ss: 0068
Sep 14 07:33:42 bluez kernel: Process modprobe (pid: 6936, threadinfo=f76c4000 task=f7bbecf0)
Sep 14 07:33:42 bluez kernel: Stack: 00000083 f77ff9c0 00000000 f8f13b0f 00000000 f7fcf778 f8f153e0 f7fcf778 
Sep 14 07:33:42 bluez kernel:        f8f153e0 f8ed7106 f7fcf778 f7fcf778 f7696c74 f7fcf788 f8f15400 c0273106 
Sep 14 07:33:42 bluez kernel:        f7fcf788 f7fcf7b0 f7fcf788 f77ff9c0 f8ed73b0 f7fcf788 00000005 f8f13a17 
Sep 14 07:33:42 bluez kernel: Call Trace:
Sep 14 07:33:42 bluez kernel:  [<f8f13b0f>] hci_usb_disconnect+0x2f/0xa0 [hci_usb]
Sep 14 07:33:42 bluez kernel:  [<f8ed7106>] usb_unbind_interface+0x76/0x80 [usbcore]
Sep 14 07:33:42 bluez kernel:  [<c0273106>] device_release_driver+0x66/0x70
Sep 14 07:33:42 bluez kernel:  [<f8ed73b0>] usb_driver_release_interface+0x50/0x60 [usbcore]
Sep 14 07:33:42 bluez kernel:  [<f8f13a17>] hci_usb_probe+0x387/0x450 [hci_usb]
Sep 14 07:33:42 bluez kernel:  [<c0182b10>] init_dir+0x0/0x20
Sep 14 07:33:42 bluez kernel:  [<f8ed707d>] usb_probe_interface+0x5d/0x70 [usbcore]
Sep 14 07:33:42 bluez kernel:  [<c0272f2f>] bus_match+0x3f/0x70
Sep 14 07:33:42 bluez kernel:  [<c027305c>] driver_attach+0x5c/0xa0
Sep 14 07:33:42 bluez kernel:  [<c0273321>] bus_add_driver+0x91/0xb0
Sep 14 07:33:42 bluez kernel:  [<c02737af>] driver_register+0x2f/0x40
Sep 14 07:33:42 bluez kernel:  [<c0119741>] printk+0x111/0x170
Sep 14 07:33:42 bluez kernel:  [<f8ed714e>] usb_register+0x3e/0xa0 [usbcore]
Sep 14 07:33:42 bluez kernel:  [<f8f25028>] hci_usb_init+0x28/0x4f [hci_usb]
Sep 14 07:33:42 bluez kernel:  [<c012ef69>] sys_init_module+0x119/0x230
Sep 14 07:33:42 bluez kernel:  [<c010610b>] syscall_call+0x7/0xb
Sep 14 07:33:42 bluez kernel: 
Sep 14 07:33:42 bluez kernel: Code: 8b b3 20 01 00 00 0f ba 73 14 02 19 c0 85 c0 74 29 9c 58 fa 
Sep 14 07:33:42 bluez usb.agent[6825]: ... can't load module hci_usb
Sep 14 07:33:42 bluez usb.agent[6825]: missing kernel or user mode driver hci_usb 
Sep 14 07:33:43 bluez kernel:  <6>usb 1-2: USB disconnect, address 2
Sep 14 07:33:44 bluez kernel: Linux Kernel Card Services
Sep 14 07:33:44 bluez kernel:   options:  [pci] [cardbus] [pm]
Sep 14 07:33:44 bluez kernel: PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
Sep 14 07:33:44 bluez kernel: Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a]
Sep 14 07:33:44 bluez kernel: Yenta: ISA IRQ mask 0x0478, PCI irq 11
Sep 14 07:33:44 bluez kernel: Socket status: 30000006
Sep 14 07:33:44 bluez kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Sep 14 07:33:44 bluez ieee1394.agent[7171]: ... no drivers for IEEE1394 product 0x/0x/0x
Sep 14 07:33:44 bluez kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[faffd800-faffdfff]  Max Packet=[2048]
Sep 14 07:33:44 bluez kernel: ipw2200: Intel(R) PRO/Wireless 2200 Network Driver, 0.6
Sep 14 07:33:44 bluez kernel: ipw2200: Copyright(c) 2003-2004 Intel Corporation
Sep 14 07:33:44 bluez kernel: eth1: Setting MAC to 00:0e:35:09:7b:23
Sep 14 07:33:44 bluez net.agent[7269]: add event not handled
Sep 14 07:33:45 bluez ieee1394.agent[7295]: ... no drivers for IEEE1394 product 0x/0x/0x
Sep 14 07:33:45 bluez kernel: ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Sep 14 07:33:45 bluez net.agent[7331]: add event not handled
Sep 14 07:33:45 bluez ieee1394.agent[7309]: ... no drivers for IEEE1394 product 0x/0x/0x
Sep 14 07:33:47 bluez kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Sep 14 07:33:47 bluez kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x4d0-0x4d7
Sep 14 07:33:47 bluez kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Sep 14 07:33:47 bluez irattach: executing: 'echo bluez > /proc/sys/net/irda/devname'
Sep 14 07:33:47 bluez irattach: executing: 'echo 1 > /proc/sys/net/irda/discovery'
Sep 14 07:33:47 bluez irattach: Starting device irda0
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/Type1 (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/Speedo (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/CID (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/util (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/local (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/Speedo (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/truetype (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/sharefont (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/default/Type1 (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/ttf/decoratives (unreadable) 
Sep 14 07:33:49 bluez xfs: ignoring font path element /usr/share/fonts/ttf/western (unreadable) 
Sep 14 07:33:49 bluez kernel: i8k: unable to get SMM Dell signature
Sep 14 07:33:49 bluez kernel: i8k: unable to get SMM BIOS version
Sep 14 07:33:49 bluez kernel: Dell laptop SMM driver v1.13 14/05/2002 Massimo Dal Zotto (dz@debian.org)
Sep 14 07:33:50 bluez kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Sep 14 07:33:50 bluez kernel: b44: eth0: Flow control is off for TX and off for RX.
Sep 14 07:33:50 bluez kernel: mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x200000
Sep 14 07:33:55 bluez kernel: NETDEV WATCHDOG: eth0: transmit timed out
Sep 14 07:33:55 bluez kernel: b44: eth0: Link is down.
Sep 14 07:33:58 bluez kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Sep 14 07:33:58 bluez kernel: b44: eth0: Flow control is off for TX and off for RX.

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-09-16  8:31 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-09-14 18:38 [Bluez-users] USB/bluetooth crash at boot-time Charles Bueche
2004-09-14 19:02 ` Marcel Holtmann
2004-09-16  8:31   ` Charles Bueche

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox