* [Bluez-users] Apple PowerBook and Nokia 6310i
@ 2004-10-20 23:36 Wouter Verhelst
2004-10-21 17:48 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Wouter Verhelst @ 2004-10-20 23:36 UTC (permalink / raw)
To: bluez-users
[-- Attachment #1: Type: text/plain, Size: 2748 bytes --]
Hi,
I recently (as in, two days ago) acquired a new laptop, a 12" Apple
PowerBook G4. This thing has bluetooth; so does my Nokia.
Right now, I'm trying to connect to the Internet using the laptop and
the Nokia, which doesn't seem to work. I did get it to work using IrDA
on my previous laptop, but a) that was an i386 laptop, b) it was over
IrDA instead of bluetooth, and c) the reason I bought this laptop is
because the previous one was stolen from me -- so I can't look up how I
did everything anymore.
After configuring everything, this is what appears in my syslog when I
try to connect:
|Oct 21 01:29:41 localhost pppd[10896]: pppd 2.4.2 started by wouter, uid 1000
|Oct 21 01:29:41 localhost hcid[3587]: link_key_request (sba=00:0D:93:10:92:B6, dba=00:60:57:30:38:D8)
|Oct 21 01:29:42 localhost chat[10897]: abort on (BUSY)
|Oct 21 01:29:42 localhost chat[10897]: abort on (NO CARRIER)
|Oct 21 01:29:42 localhost chat[10897]: abort on (VOICE)
|Oct 21 01:29:42 localhost chat[10897]: abort on (NO DIALTONE)
|Oct 21 01:29:42 localhost chat[10897]: send (AT&F^M)
|Oct 21 01:29:42 localhost chat[10897]: expect (OK)
|Oct 21 01:29:43 localhost chat[10897]: AT&F^M^M
|Oct 21 01:29:43 localhost chat[10897]: OK
|Oct 21 01:29:43 localhost chat[10897]: -- got it
|Oct 21 01:29:43 localhost chat[10897]: send (ATDT+3222750205^M)
|Oct 21 01:29:43 localhost chat[10897]: expect (CONNECT)
|Oct 21 01:29:43 localhost chat[10897]: ^M
|Oct 21 01:30:03 localhost chat[10897]: ATDT+3222750205^M^M
|Oct 21 01:30:03 localhost chat[10897]: CONNECT
|Oct 21 01:30:03 localhost chat[10897]: -- got it
|Oct 21 01:30:03 localhost pppd[10896]: Serial connection established.
|Oct 21 01:30:03 localhost kernel: divert: not allocating divert_blk for non-ethernet device ppp0
|Oct 21 01:30:03 localhost pppd[10896]: Using interface ppp0
|Oct 21 01:30:03 localhost pppd[10896]: Connect: ppp0 <--> /dev/rfcomm0
|Oct 21 01:30:16 localhost pppd[10896]: Serial line is looped back.
|Oct 21 01:30:16 localhost pppd[10896]: Connection terminated.
|Oct 21 01:30:16 localhost kernel: divert: no divert_blk to free, ppp0 not ethernet
|Oct 21 01:30:28 localhost pppd[10896]: Terminating on signal 15.
|Oct 21 01:30:28 localhost pppd[10896]: Exit.
While this happens, I can see the Nokia does set up the connection;
however, it drops the line somewhere between the "Connect: ppp0 <-->
/dev/rfcomm0" and te "Serial line is looped back" message. When that
happens, it appears as if pppd does not immediately notice.
I'm not sure why it doesn't work; Any hints would be greatly
appreciated.
--
EARTH
smog | bricks
AIR -- mud -- FIRE
soda water | tequila
WATER
-- with thanks to fortune
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] Apple PowerBook and Nokia 6310i
2004-10-20 23:36 [Bluez-users] Apple PowerBook and Nokia 6310i Wouter Verhelst
@ 2004-10-21 17:48 ` Marcel Holtmann
2004-10-21 18:03 ` Wouter Verhelst
0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-21 17:48 UTC (permalink / raw)
To: Wouter Verhelst; +Cc: BlueZ Mailing List
Hi Wouter,
> I recently (as in, two days ago) acquired a new laptop, a 12" Apple
> PowerBook G4. This thing has bluetooth; so does my Nokia.
>
> Right now, I'm trying to connect to the Internet using the laptop and
> the Nokia, which doesn't seem to work. I did get it to work using IrDA
> on my previous laptop, but a) that was an i386 laptop, b) it was over
> IrDA instead of bluetooth, and c) the reason I bought this laptop is
> because the previous one was stolen from me -- so I can't look up how I
> did everything anymore.
>
> After configuring everything, this is what appears in my syslog when I
> try to connect:
>
> |Oct 21 01:29:41 localhost pppd[10896]: pppd 2.4.2 started by wouter, uid 1000
> |Oct 21 01:29:41 localhost hcid[3587]: link_key_request (sba=00:0D:93:10:92:B6, dba=00:60:57:30:38:D8)
> |Oct 21 01:29:42 localhost chat[10897]: abort on (BUSY)
> |Oct 21 01:29:42 localhost chat[10897]: abort on (NO CARRIER)
> |Oct 21 01:29:42 localhost chat[10897]: abort on (VOICE)
> |Oct 21 01:29:42 localhost chat[10897]: abort on (NO DIALTONE)
> |Oct 21 01:29:42 localhost chat[10897]: send (AT&F^M)
> |Oct 21 01:29:42 localhost chat[10897]: expect (OK)
> |Oct 21 01:29:43 localhost chat[10897]: AT&F^M^M
> |Oct 21 01:29:43 localhost chat[10897]: OK
> |Oct 21 01:29:43 localhost chat[10897]: -- got it
> |Oct 21 01:29:43 localhost chat[10897]: send (ATDT+3222750205^M)
> |Oct 21 01:29:43 localhost chat[10897]: expect (CONNECT)
> |Oct 21 01:29:43 localhost chat[10897]: ^M
> |Oct 21 01:30:03 localhost chat[10897]: ATDT+3222750205^M^M
> |Oct 21 01:30:03 localhost chat[10897]: CONNECT
> |Oct 21 01:30:03 localhost chat[10897]: -- got it
> |Oct 21 01:30:03 localhost pppd[10896]: Serial connection established.
> |Oct 21 01:30:03 localhost kernel: divert: not allocating divert_blk for non-ethernet device ppp0
> |Oct 21 01:30:03 localhost pppd[10896]: Using interface ppp0
> |Oct 21 01:30:03 localhost pppd[10896]: Connect: ppp0 <--> /dev/rfcomm0
> |Oct 21 01:30:16 localhost pppd[10896]: Serial line is looped back.
> |Oct 21 01:30:16 localhost pppd[10896]: Connection terminated.
> |Oct 21 01:30:16 localhost kernel: divert: no divert_blk to free, ppp0 not ethernet
> |Oct 21 01:30:28 localhost pppd[10896]: Terminating on signal 15.
> |Oct 21 01:30:28 localhost pppd[10896]: Exit.
>
> While this happens, I can see the Nokia does set up the connection;
> however, it drops the line somewhere between the "Connect: ppp0 <-->
> /dev/rfcomm0" and te "Serial line is looped back" message. When that
> happens, it appears as if pppd does not immediately notice.
what kernel version is this? Maybe it is a kernel bug in the PPP code or
your settings for pppd are simply wrong. Try other dialers like wvdial.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Apple PowerBook and Nokia 6310i
2004-10-21 17:48 ` Marcel Holtmann
@ 2004-10-21 18:03 ` Wouter Verhelst
2004-10-21 19:33 ` Wouter Verhelst
2004-10-21 22:49 ` Marcel Holtmann
0 siblings, 2 replies; 6+ messages in thread
From: Wouter Verhelst @ 2004-10-21 18:03 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
[-- Attachment #1: Type: text/plain, Size: 1546 bytes --]
On Thu, Oct 21, 2004 at 07:48:09PM +0200, Marcel Holtmann wrote:
> Hi Wouter,
[...]
> > While this happens, I can see the Nokia does set up the connection;
> > however, it drops the line somewhere between the "Connect: ppp0 <-->
> > /dev/rfcomm0" and te "Serial line is looped back" message. When that
> > happens, it appears as if pppd does not immediately notice.
>
> what kernel version is this?
2.6.8, the one distributed with Debian Sarge (package
kernel-image-2.6.8-powerpc version 2.6.8-6). Note, they have a few
Debian-specific patches; I'll try with vanilla 2.6.9 and see whether
that works.
> Maybe it is a kernel bug in the PPP code or your settings for pppd are
> simply wrong.
That's most certainly possible, since I'm not a PPP guru; however, the
following doesn't look incorrect to me:
|wouter@country:/etc/ppp/peers$ egrep -v '(^#|^$)' provider
|noauth
|connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"
|defaultroute
|/dev/rfcomm0
|115200
|persist
/etc/chatscripts/provider:
|ABORT BUSY
|ABORT "NO CARRIER"
|ABORT VOICE
|ABORT "NO DIALTONE"
|"" AT&F
|OK ATDT+3222750205
|CONNECT
which, I think, should work, no?
> Try other dialers like wvdial.
Hmm, I could try that, but I'd rather explore some other possibilities
before I go that route. If there are any, that is ;-)
Thanks,
--
EARTH
smog | bricks
AIR -- mud -- FIRE
soda water | tequila
WATER
-- with thanks to fortune
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] Apple PowerBook and Nokia 6310i
2004-10-21 18:03 ` Wouter Verhelst
@ 2004-10-21 19:33 ` Wouter Verhelst
2004-10-21 22:49 ` Marcel Holtmann
1 sibling, 0 replies; 6+ messages in thread
From: Wouter Verhelst @ 2004-10-21 19:33 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
On Thu, Oct 21, 2004 at 08:03:35PM +0200, wrote:
> Debian-specific patches; I'll try with vanilla 2.6.9 and see whether
> that works.
Tried that; it didn't, same problem.
--
EARTH
smog | bricks
AIR -- mud -- FIRE
soda water | tequila
WATER
-- with thanks to fortune
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] Apple PowerBook and Nokia 6310i
2004-10-21 18:03 ` Wouter Verhelst
2004-10-21 19:33 ` Wouter Verhelst
@ 2004-10-21 22:49 ` Marcel Holtmann
2004-10-22 11:32 ` Wouter Verhelst
1 sibling, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-21 22:49 UTC (permalink / raw)
To: Wouter Verhelst; +Cc: BlueZ Mailing List
Hi Wouter,
> > Try other dialers like wvdial.
>
> Hmm, I could try that, but I'd rather explore some other possibilities
> before I go that route. If there are any, that is ;-)
you should really try the wvdial program, because it always did the
right job for me.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Apple PowerBook and Nokia 6310i
2004-10-21 22:49 ` Marcel Holtmann
@ 2004-10-22 11:32 ` Wouter Verhelst
0 siblings, 0 replies; 6+ messages in thread
From: Wouter Verhelst @ 2004-10-22 11:32 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
[-- Attachment #1: Type: text/plain, Size: 883 bytes --]
On Fri, Oct 22, 2004 at 12:49:57AM +0200, Marcel Holtmann wrote:
> Hi Wouter,
>
> > > Try other dialers like wvdial.
> >
> > Hmm, I could try that, but I'd rather explore some other possibilities
> > before I go that route. If there are any, that is ;-)
>
> you should really try the wvdial program, because it always did the
> right job for me.
I looked at it a few times in the past, and it never worked with the
particular quirks of my provider.
In the mean time, though, I found out what the problem was. I had to add
"user <username>" and "usepeerdns" directives to the peers/provider
file; now everything works smoothly.
Next, try and get GPRS working. But to do that, I shouldn't need your
help anymore. Thanks!
--
EARTH
smog | bricks
AIR -- mud -- FIRE
soda water | tequila
WATER
-- with thanks to fortune
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-10-22 11:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-20 23:36 [Bluez-users] Apple PowerBook and Nokia 6310i Wouter Verhelst
2004-10-21 17:48 ` Marcel Holtmann
2004-10-21 18:03 ` Wouter Verhelst
2004-10-21 19:33 ` Wouter Verhelst
2004-10-21 22:49 ` Marcel Holtmann
2004-10-22 11:32 ` Wouter Verhelst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox