From: Paolino paperino <vonzoltan@yahoo.it>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Socket CF PCMCIA
Date: Tue, 8 Mar 2005 10:18:38 +0100 (CET) [thread overview]
Message-ID: <20050308091838.35137.qmail@web40624.mail.yahoo.com> (raw)
In-Reply-To: 6667
On the zaurus i've inserted the card, the card is
operative (cardctl said it), i load by hand the
modules dtl1_cs, and bluez...but i' get the same
message, as the device is not ready. I get the same
message when i do hciconfgi on my laptop and i've not
inserted the usb bt dongle.
On the zaurus this seems that there aren't a link
between the card and the stack..i mistake?How can i
try to solve this?
Thanks
Best regards
Andrea S.
--- Paolino paperino <vonzoltan@yahoo.it> wrote:
> Hi,
> if i not mistake, it shuold be a rev F+, thanks' for
> your hint...so i must' use hciattach, i plug the
> card,
> then lsmod dtl1_cs, and then hciconfig hci0 up...
> thank's...i will try this
> Andrea S.
>
> --- Marcel Holtmann <marcel@holtmann.org> wrote:
> > Hi Andrea,
> >
> > > Ok, i've seen taht Socket CF has got problem
> (now
> > > solved) with the ker 2.6. But with 2.4 (Zaurus
> has
> > a
> > > 2.4.28 customized by embedix) works fine?
> > > Which comand i must type to bring up a Bluetooth
> > CF
> > > card..afterm plugged into might i use hciattach?
> > On
> > > which device? Zaurus ttyS0 ttyS1 let do the
> > hciattach
> > > in a timeout...
> >
> > what revision is it? The revision E and F uses the
> > dtl1_cs driver and
> > are not serial port based.
> >
> > Regards
> >
> > Marcel
> >
> >
> >
> >
> >
>
-------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT
> > Products from real users.
> > Discover which products truly live up to the hype.
> > Start reading now.
> >
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> >
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
> >
>
>
>
> ___________________________________
> Nuovo Yahoo! Messenger: E' molto più divertente:
> Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo
> ora!
> http://it.messenger.yahoo.it
>
>
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
>
___________________________________
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora!
http://it.messenger.yahoo.it
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2005-03-08 9:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-08 9:18 Paolino paperino [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-03-05 18:54 [Bluez-users] Socket CF PCMCIA Paolino paperino
2005-03-05 18:42 Paolino paperino
2005-03-05 18:46 ` Marcel Holtmann
2005-03-04 16:48 Paolino paperino
2005-03-04 19:42 ` Marcel Holtmann
2005-03-04 20:33 ` Mathias Adam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050308091838.35137.qmail@web40624.mail.yahoo.com \
--to=vonzoltan@yahoo.it \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox