Re: [Bluez-users] Socket CF PCMCIA

Re: [Bluez-users] Socket CF PCMCIA

[Paolino paperino]

On the zaurus i've inserted the card, the card is
operative (cardctl said it), i load by hand the
modules dtl1_cs, and bluez...but i' get the same
message, as the device is not ready. I get the same
message when i do hciconfgi on my laptop and i've not
inserted the usb bt dongle.
On the zaurus this seems that there aren't a link
between the card and the stack..i mistake?How can i
try to solve this?
Thanks 
Best regards
Andrea S.
--- Paolino paperino <vonzoltan@yahoo.it> wrote:
> Hi, 
> if i not mistake, it shuold be a rev F+, thanks' for
> your hint...so i must' use hciattach, i plug the
> card,
> then lsmod dtl1_cs, and then hciconfig hci0 up...
> thank's...i will try this
> Andrea S.
> 
> --- Marcel Holtmann <marcel@holtmann.org> wrote:
> > Hi Andrea,
> > 
> > > Ok, i've seen taht Socket CF has got problem
> (now
> > > solved) with the ker 2.6. But with 2.4 (Zaurus
> has
> > a
> > > 2.4.28 customized by embedix) works fine?
> > > Which comand i must type to bring up a Bluetooth
> > CF
> > > card..afterm plugged into might i use hciattach?
> > On
> > > which device? Zaurus ttyS0 ttyS1 let do the
> > hciattach
> > > in a timeout...
> > 
> > what revision is it? The revision E and F uses the
> > dtl1_cs driver and
> > are not serial port based.
> > 
> > Regards
> > 
> > Marcel
> > 
> > 
> > 
> > 
> >
>
-------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT
> > Products from real users.
> > Discover which products truly live up to the hype.
> > Start reading now.
> >
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> >
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
> > 
> 
> 
> 		
> ___________________________________ 
> Nuovo Yahoo! Messenger: E' molto più divertente:
> Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo
> ora! 
> http://it.messenger.yahoo.it
> 
> 
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
> 


		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora! 
http://it.messenger.yahoo.it


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket CF PCMCIA

[Paolino paperino]

Hi, 
if i not mistake, it shuold be a rev F+, thanks' for
your hint...so i must' use hciattach, i plug the card,
then lsmod dtl1_cs, and then hciconfig hci0 up...
thank's...i will try this
Andrea S.

--- Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Andrea,
> 
> > Ok, i've seen taht Socket CF has got problem (now
> > solved) with the ker 2.6. But with 2.4 (Zaurus has
> a
> > 2.4.28 customized by embedix) works fine?
> > Which comand i must type to bring up a Bluetooth
> CF
> > card..afterm plugged into might i use hciattach?
> On
> > which device? Zaurus ttyS0 ttyS1 let do the
> hciattach
> > in a timeout...
> 
> what revision is it? The revision E and F uses the
> dtl1_cs driver and
> are not serial port based.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
> 


		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora! 
http://it.messenger.yahoo.it


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket CF PCMCIA

[Paolino paperino]

Ok, i've seen taht Socket CF has got problem (now
solved) with the ker 2.6. But with 2.4 (Zaurus has a
2.4.28 customized by embedix) works fine?
Which comand i must type to bring up a Bluetooth CF
card..afterm plugged into might i use hciattach? On
which device? Zaurus ttyS0 ttyS1 let do the hciattach
in a timeout...
Somebody have ever used Secket CF BT on Zaurus? 
(Mine is a SL 6000)
Thank's people of Bluez!!
Best regards 
Andrea S.
--- Mathias Adam <a2@adamis.de> wrote:
> On 04.03.05 20:42:41, Marcel Holtmann wrote:
> > there are problems with the 2.6 kernel, but nobody
> knows for sure what
> > and where the problems are.
> 
> I asked here last week about the same problems with
> the socket bt card
> and 2.6 and didn't succeed yet.
> It seems that it's a problem within the 8250 serial
> driver (got that
> from the linux-pcmcia mailing list). I'm still
> investigating a little
> about that but don't think that I'll find a solution
> as I'm no linux
> kernel expert...
> 
> 
> Regards
> 
> Mathias
> 
> 
> -- 
> Zwei Dinge sind zu unserer Arbeit nötig:
> Unermüdliche Ausdauer und die
> Bereitschaft, etwas, in das man viel Zeit und Arbeit
> gesteckt hat,
> wieder wegzuwerfen.                                 
>     - Albert Einstein
> 
> 
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
> 


		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora! 
http://it.messenger.yahoo.it


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket CF PCMCIA

[Marcel Holtmann]

Hi Andrea,

> Ok, i've seen taht Socket CF has got problem (now
> solved) with the ker 2.6. But with 2.4 (Zaurus has a
> 2.4.28 customized by embedix) works fine?
> Which comand i must type to bring up a Bluetooth CF
> card..afterm plugged into might i use hciattach? On
> which device? Zaurus ttyS0 ttyS1 let do the hciattach
> in a timeout...

what revision is it? The revision E and F uses the dtl1_cs driver and
are not serial port based.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

[Bluez-users] Socket CF PCMCIA

[Paolino paperino]

Hi, i've a 2.6.10 kernel from fedora  project
(FC2)..and a Zaurus SL6000..i've tried the CF on the
zaurus without succes..so i tried it on my laptop
(usually i use Bluez throught an USB dongle, adn wokrs
fine). I plug the CF, serial_cs is laoded, i try
hciattach but fails.
Somebody could explain to me how  can i make working
the CF...step by step?!Because i don't know where
smashing my head..
Best regards
Andrea S.


		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora! 
http://it.messenger.yahoo.it


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket CF PCMCIA

[Marcel Holtmann]

Hi Andrea,

> Hi, i've a 2.6.10 kernel from fedora  project
> (FC2)..and a Zaurus SL6000..i've tried the CF on the
> zaurus without succes..so i tried it on my laptop
> (usually i use Bluez throught an USB dongle, adn wokrs
> fine). I plug the CF, serial_cs is laoded, i try
> hciattach but fails.
> Somebody could explain to me how  can i make working
> the CF...step by step?!Because i don't know where
> smashing my head..

there are problems with the 2.6 kernel, but nobody knows for sure what
and where the problems are.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket CF PCMCIA

[Mathias Adam]

On 04.03.05 20:42:41, Marcel Holtmann wrote:
> there are problems with the 2.6 kernel, but nobody knows for sure what
> and where the problems are.

I asked here last week about the same problems with the socket bt card
and 2.6 and didn't succeed yet.
It seems that it's a problem within the 8250 serial driver (got that
from the linux-pcmcia mailing list). I'm still investigating a little
about that but don't think that I'll find a solution as I'm no linux
kernel expert...


Regards

Mathias


--=20
Zwei Dinge sind zu unserer Arbeit n=F6tig: Unerm=FCdliche Ausdauer und di=
e
Bereitschaft, etwas, in das man viel Zeit und Arbeit gesteckt hat,
wieder wegzuwerfen.                                      - Albert Einstei=
n


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users