[Bluez-users] bluez and billionton pcbtc1

[Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

I saw this in the list of adapters.. pcbtc1 but i can't get it to work
in my laptop.. any ideas or thoughts on if it works or not with
bluez..

dGV


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Marcel Holtmann]

Hi David,

> I saw this in the list of adapters.. pcbtc1 but i can't get it to work
> in my laptop.. any ideas or thoughts on if it works or not with
> bluez..

what does "dump_cis" says about this card.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

hey thanks for the quick reply.. 
i have no clue what i'm doing :) but 
here is the dump_cis result, hope it helps,:

Socket 0:
  dev_info
    NULL 0ns, 512b
  manfid 0x0279, 0x950b
  funcid serial_port [post]
  serial_interface
    uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
  vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""
  config base 0x00f8 mask 0x000f last_index 0x04
  cftable_entry 0x01 [default]
    [rdybsy]
    Vcc Vnom 3300mV
    io 0x03f8-0x0407 [lines=8] [8bit] [range]
    irq mask 0xffff [level] [shared]
  cftable_entry 0x02
    io 0x0000-0x7fff [lines=15] [8bit]

Socket 1:
  no CIS present



On Tue, 29 Mar 2005 07:45:17 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi David,
> 
> > I saw this in the list of adapters.. pcbtc1 but i can't get it to work
> > in my laptop.. any ideas or thoughts on if it works or not with
> > bluez..
> 
> what does "dump_cis" says about this card.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Marcel Holtmann]

Hi David,

> hey thanks for the quick reply.. 
> i have no clue what i'm doing :) but 
> here is the dump_cis result, hope it helps,:
> 
> Socket 0:
>   dev_info
>     NULL 0ns, 512b
>   manfid 0x0279, 0x950b
>   funcid serial_port [post]
>   serial_interface
>     uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
>   vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""
>   config base 0x00f8 mask 0x000f last_index 0x04
>   cftable_entry 0x01 [default]
>     [rdybsy]
>     Vcc Vnom 3300mV
>     io 0x03f8-0x0407 [lines=8] [8bit] [range]
>     irq mask 0xffff [level] [shared]
>   cftable_entry 0x02
>     io 0x0000-0x7fff [lines=15] [8bit]

so it is a serial based card. If you call dmesg, do you see something
about a new ttyS device when you insert the card?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

yep i saw that last time i stuck the card in, but didn't quite figure it out 

here's the output from dmesg:

ttyS14 at I/O 0x400 (irq = 3) is a 16C950/954



On Tue, 29 Mar 2005 18:36:57 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi David,
> 
> > hey thanks for the quick reply..
> > i have no clue what i'm doing :) but
> > here is the dump_cis result, hope it helps,:
> >
> > Socket 0:
> >   dev_info
> >     NULL 0ns, 512b
> >   manfid 0x0279, 0x950b
> >   funcid serial_port [post]
> >   serial_interface
> >     uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
> >   vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""
> >   config base 0x00f8 mask 0x000f last_index 0x04
> >   cftable_entry 0x01 [default]
> >     [rdybsy]
> >     Vcc Vnom 3300mV
> >     io 0x03f8-0x0407 [lines=8] [8bit] [range]
> >     irq mask 0xffff [level] [shared]
> >   cftable_entry 0x02
> >     io 0x0000-0x7fff [lines=15] [8bit]
> 
> so it is a serial based card. If you call dmesg, do you see something
> about a new ttyS device when you insert the card?
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Marcel Holtmann]

Hi David,

> yep i saw that last time i stuck the card in, but didn't quite figure it out 
> 
> here's the output from dmesg:
> 
> ttyS14 at I/O 0x400 (irq = 3) is a 16C950/954

and now you only need to find the right hciattach parameters to get this
serial port attached to the Bluetooth subsystem.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

hmm.. cool.. how do i do that ? where should i look

(completely clueless asi  mentioned before :) )

thanks,
David


On Tue, 29 Mar 2005 18:49:46 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi David,
> 
> > yep i saw that last time i stuck the card in, but didn't quite figure it out
> >
> > here's the output from dmesg:
> >
> > ttyS14 at I/O 0x400 (irq = 3) is a 16C950/954
> 
> and now you only need to find the right hciattach parameters to get this
> serial port attached to the Bluetooth subsystem.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

one more question actually 

i looked at the list.. and i wanted to use my little mouse as hid (one
of the reasons for bt, and also gettign phone and axim working)

but didn't find it on the list.. 

http://www.holtmann.org/linux/bluetooth/hid.html

http://computerlogin.com/sales/productfile/Y_BlueTMouse.html

do i need to do anything special to "pair" them.. like do i need a
hardware id from the mouse or can i just push the paring button on the
mouse.. look for it.. and poof it's there (minus the paring pin i need
i think"

Thanks again
David


On Tue, 29 Mar 2005 11:58:20 -0500, David Vitrant <prussia@gmail.com> wrote:
> hmm.. cool.. how do i do that ? where should i look
> 
> (completely clueless asi  mentioned before :) )
> 
> thanks,
> David
> 
> 
> On Tue, 29 Mar 2005 18:49:46 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> > Hi David,
> >
> > > yep i saw that last time i stuck the card in, but didn't quite figure it out
> > >
> > > here's the output from dmesg:
> > >
> > > ttyS14 at I/O 0x400 (irq = 3) is a 16C950/954
> >
> > and now you only need to find the right hciattach parameters to get this
> > serial port attached to the Bluetooth subsystem.
> >
> > Regards
> >
> > Marcel
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
> >
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

ok sorry for the update.. i ran this command

hciattach ttyS14 any 16550

(From the above hints you gave me :) ) and something happenned in dmesg.. 

i think it's working .. gnome-bluetooth manager still gives me the
gconf error . and gnome authentication error (no ideas.. and nobody
has been able to answer me on what that error is.. plus a google
search didn't pull anything up"

i think this great now :) gotta figure out how to get my mouse working
somehow.. thanks again for your time patience and the great utility.

David 
p.s. anymore hints would be great


"
(Bluetooth Device Manager:7464): GnomeUI-WARNING **: While connecting
to session manager:
Authentication Rejected, reason : None of the authentication protocols
specified are supported and host-based authentication failed.

(Bluetooth Device Manager:7464): GConf-CRITICAL **: file
gconf-client.c: line 547 (gconf_client_add_dir): assertion
`gconf_valid_key (dirname, NULL)' failed

"


On Tue, 29 Mar 2005 12:15:37 -0500, David Vitrant <prussia@gmail.com> wrote:
> one more question actually
> 
> i looked at the list.. and i wanted to use my little mouse as hid (one
> of the reasons for bt, and also gettign phone and axim working)
> 
> but didn't find it on the list..
> 
> http://www.holtmann.org/linux/bluetooth/hid.html
> 
> http://computerlogin.com/sales/productfile/Y_BlueTMouse.html
> 
> do i need to do anything special to "pair" them.. like do i need a
> hardware id from the mouse or can i just push the paring button on the
> mouse.. look for it.. and poof it's there (minus the paring pin i need
> i think"
> 
> Thanks again
> David
> 
> 
> On Tue, 29 Mar 2005 11:58:20 -0500, David Vitrant <prussia@gmail.com> wrote:
> > hmm.. cool.. how do i do that ? where should i look
> >
> > (completely clueless asi  mentioned before :) )
> >
> > thanks,
> > David
> >
> >
> > On Tue, 29 Mar 2005 18:49:46 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> > > Hi David,
> > >
> > > > yep i saw that last time i stuck the card in, but didn't quite figure it out
> > > >
> > > > here's the output from dmesg:
> > > >
> > > > ttyS14 at I/O 0x400 (irq = 3) is a 16C950/954
> > >
> > > and now you only need to find the right hciattach parameters to get this
> > > serial port attached to the Bluetooth subsystem.
> > >
> > > Regards
> > >
> > > Marcel
> > >
> > > -------------------------------------------------------
> > > SF email is sponsored by - The IT Product Guide
> > > Read honest & candid reviews on hundreds of IT Products from real users.
> > > Discover which products truly live up to the hype. Start reading now.
> > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > > _______________________________________________
> > > Bluez-users mailing list
> > > Bluez-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/bluez-users
> > >
> >
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Marcel Holtmann]

Hi David,

> ok sorry for the update.. i ran this command
> 
> hciattach ttyS14 any 16550
> 
> (From the above hints you gave me :) ) and something happenned in dmesg.. 

the command can't be right, because 16550 is not a valid baud rate. It
is the UART type. Use 115200 as baud rate. You have to play with it and
see if it works.

Start "hcid" as root and check with "hciconfig" if you see the Bluetooth
device address. If yes, then your card is working.

> i think it's working .. gnome-bluetooth manager still gives me the
> gconf error . and gnome authentication error (no ideas.. and nobody
> has been able to answer me on what that error is.. plus a google
> search didn't pull anything up"

This is the wrong mailing list for a Gnome-Bluetooth questions.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[David Vitrant]

ok well i tried from 9600 to 921600

using the:

hciattach ttyS14 any "number here"

then i did what you said and ran "hcid" and "hciconfig" in every
outpud it's the same (except the RX bytes and errors increase)

am i missing something  or does that mean that my card just doesn't
work with bluez :(

hci0:   Type: UART
        BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
        DOWN INIT RUNNING
        RX bytes:18 acl:0 sco:0 events:0 errors:18
        TX bytes:4 acl:0 sco:0 commands:1 errors:0



thanks again,
David

On Tue, 29 Mar 2005 19:38:23 +0200, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi David,
> 
> > ok sorry for the update.. i ran this command
> >
> > hciattach ttyS14 any 16550
> >
> > (From the above hints you gave me :) ) and something happenned in dmesg..
> 
> the command can't be right, because 16550 is not a valid baud rate. It
> is the UART type. Use 115200 as baud rate. You have to play with it and
> see if it works.
> 
> Start "hcid" as root and check with "hciconfig" if you see the Bluetooth
> device address. If yes, then your card is working.
> 
> > i think it's working .. gnome-bluetooth manager still gives me the
> > gconf error . and gnome authentication error (no ideas.. and nobody
> > has been able to answer me on what that error is.. plus a google
> > search didn't pull anything up"
> 
> This is the wrong mailing list for a Gnome-Bluetooth questions.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Marcel Holtmann]

Hi David,

> ok well i tried from 9600 to 921600
> 
> using the:
> 
> hciattach ttyS14 any "number here"
> 
> then i did what you said and ran "hcid" and "hciconfig" in every
> outpud it's the same (except the RX bytes and errors increase)
> 
> am i missing something  or does that mean that my card just doesn't
> work with bluez :(
> 
> hci0:   Type: UART
>         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
>         DOWN INIT RUNNING
>         RX bytes:18 acl:0 sco:0 events:0 errors:18
>         TX bytes:4 acl:0 sco:0 commands:1 errors:0

there are actually more options to hciattach than only changing the baud
rate. May you look at the Windows driver *.inf to get a clue what they
are. However if this card uses a CSR chip then

	hciattach ttyS14 bcsp 115200

might work. It can also be possible that this card has a problem,
because some weird things in the new serial subsystem of the kernel.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez and billionton pcbtc1

[Pavel Ruzicka]

Hello,

before few days 17.3.2005 writes Jonathan McDowell message about
success with Billionton card with identical ID:
  product info: "Compact Flash", "Bluetooth Card", "", ""
  manfid: 0x0279, 0x950b

He suggests these commands:
setserial /dev/ttyS0 baud_base 912600
hciattach -s 912600 /dev/ttyS0 bcsp

(His baudrate is probably wrong. 921600 instead 912600 can be).
But his mail have many additional informations.
Please look at archive of mailing-list and search for message with subject:
"Billionton(?) CF card - success".
 
>   manfid 0x0279, 0x950b
>   funcid serial_port [post]
>   serial_interface
>     uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
>   vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""

Best regards,

Pavel Ruzicka


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: Fwd: [Bluez-users] bluez and billionton pcbtc1

[Jonathan McDowell]

On Tue, Mar 29, 2005 at 05:29:57PM -0500, David Vitrant wrote:
> hey.. i was referred to your post on your CF billionton card.. seems
> to have much of the same info asm ine (i attached the other posts ..
> do you have anymore insights.. i used your instructions
> 
> but when i did the hciattach it gave me this error bcsp timed out.. 
> 
> thanks.. i could certainly use the help

What kernel version? Have you applied the patch at:

http://www.summet.com/x31/8250_patch_CFcard.txt

if it's 2.6? I haven't had any luck with 2.4.20 (as on my Zaurus) yet.

> On Tue, 29 Mar 2005 23:03:38 +0200, Pavel Ruzicka <pavouk@pavouk.org> wrote:
> > Hello,
> > 
> > before few days 17.3.2005 writes Jonathan McDowell message about
> > success with Billionton card with identical ID:
> >   product info: "Compact Flash", "Bluetooth Card", "", ""
> >   manfid: 0x0279, 0x950b
> > 
> > He suggests these commands:
> > setserial /dev/ttyS0 baud_base 912600
> > hciattach -s 912600 /dev/ttyS0 bcsp
> > 
> > (His baudrate is probably wrong. 921600 instead 912600 can be).
> > But his mail have many additional informations.
> > Please look at archive of mailing-list and search for message with subject:
> > "Billionton(?) CF card - success".
> > 
> > >   manfid 0x0279, 0x950b
> > >   funcid serial_port [post]
> > >   serial_interface
> > >     uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
> > >   vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""

J.

-- 
/-\                             | No thanks, I'm already having one.
|@/  Debian GNU/Linux Developer |
\-                              |


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: Fwd: [Bluez-users] bluez and billionton pcbtc1

[Jonathan McDowell]

On Tue, Mar 29, 2005 at 05:56:57PM -0500, David Vitrant wrote:
> mind you i have no idea what i'm doing.
> 
> it's this kernel 2.6.8.1-3-386 will the patch you sent me work also
> for below 2.6.11 ?

I've no idea if it will apply, but I imagine you'll need it to get
anywhere as otherwise the driver won't be able to do high enough baud
rates to talk to the card.

You'll need to get the source to the kernel you're using, apply the
patch, recompile it, install it and then try the setserial and hciattach
commands.

> On Tue, 29 Mar 2005 23:36:48 +0100, Jonathan McDowell <noodles@earth.li> wrote:
> > On Tue, Mar 29, 2005 at 05:29:57PM -0500, David Vitrant wrote:
> > > hey.. i was referred to your post on your CF billionton card.. seems
> > > to have much of the same info asm ine (i attached the other posts ..
> > > do you have anymore insights.. i used your instructions
> > >
> > > but when i did the hciattach it gave me this error bcsp timed out..
> > >
> > > thanks.. i could certainly use the help
> > 
> > What kernel version? Have you applied the patch at:
> > 
> > http://www.summet.com/x31/8250_patch_CFcard.txt
> > 
> > if it's 2.6? I haven't had any luck with 2.4.20 (as on my Zaurus) yet.
> > 
> > > On Tue, 29 Mar 2005 23:03:38 +0200, Pavel Ruzicka <pavouk@pavouk.org> wrote:
> > > > Hello,
> > > >
> > > > before few days 17.3.2005 writes Jonathan McDowell message about
> > > > success with Billionton card with identical ID:
> > > >   product info: "Compact Flash", "Bluetooth Card", "", ""
> > > >   manfid: 0x0279, 0x950b
> > > >
> > > > He suggests these commands:
> > > > setserial /dev/ttyS0 baud_base 912600
> > > > hciattach -s 912600 /dev/ttyS0 bcsp
> > > >
> > > > (His baudrate is probably wrong. 921600 instead 912600 can be).
> > > > But his mail have many additional informations.
> > > > Please look at archive of mailing-list and search for message with subject:
> > > > "Billionton(?) CF card - success".
> > > >
> > > > >   manfid 0x0279, 0x950b
> > > > >   funcid serial_port [post]
> > > > >   serial_interface
> > > > >     uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
> > > > >   vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""

J.

-- 
] http://www.earth.li/~noodles/ []     noodles is used in pad thai     [
]  PGP/GPG Key @ the.earth.li   []                                     [
] via keyserver, web or email.  []                                     [
] RSA: 4DC4E7FD / DSA: 5B430367 []                                     [


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users