* [Bluez-users] current Bluez document describing @ 2007-02-25 16:10 penguinacity 2007-02-25 23:47 ` Marcel Holtmann 0 siblings, 1 reply; 5+ messages in thread From: penguinacity @ 2007-02-25 16:10 UTC (permalink / raw) To: bluez-users There is a lot of outdated doc out there for this. It has even been admitted here. What is the current sanctioned webpage or document that describes it? or what does rfcomm do and how what is the device named in rfcomm.conf? (the dongle?) Maybe the comment might say that if it is. Saying 'the device' is rather obtuse. Thanks. -Walt ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] current Bluez document describing 2007-02-25 16:10 [Bluez-users] current Bluez document describing penguinacity @ 2007-02-25 23:47 ` Marcel Holtmann 0 siblings, 0 replies; 5+ messages in thread From: Marcel Holtmann @ 2007-02-25 23:47 UTC (permalink / raw) To: BlueZ users Hi Walt, > There is a lot of outdated doc out there for this. It has even been admitted > here. > What is the current sanctioned webpage or document that describes it? BlueZ itself changed quite a lot in the last two years. Feel free to use wiki.bluez.org to create some state of the art documentation. > or what does rfcomm do and how > what is the device named in rfcomm.conf? (the dongle?) > Maybe the comment might say that if it is. > Saying 'the device' is rather obtuse. No idea what's your question. Be more specific. Regards Marcel ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] pairing from bluez @ 2007-02-27 20:16 Choi Sonim 2007-02-27 20:50 ` [Bluez-users] current Bluez document describing walt shekrota 0 siblings, 1 reply; 5+ messages in thread From: Choi Sonim @ 2007-02-27 20:16 UTC (permalink / raw) To: BlueZ users, swp5jhu02 hi peter, On 2/27/07, Peter Valdemar M=F8rch <swp5jhu02@sneakemail.com> wrote: > Choi Sonim choisonim-at-gmail.com |Lists| wrote: > > how can i initiate pairing from bluez ? > > even when I send a file using kbtobexclient, there is no > > pairing proces.. > > is there an application for initiating pairing ? > Even when client programs such as gnokii do initiate pairing when can you please tell me what client programs initiate pairing ? i already tried ftpc and oppc and both didn't do pairing... thank you choi ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE= VDEV _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] current Bluez document describing 2007-02-27 20:16 [Bluez-users] pairing from bluez Choi Sonim @ 2007-02-27 20:50 ` walt shekrota 2007-02-27 22:56 ` Timur Alperovich 0 siblings, 1 reply; 5+ messages in thread From: walt shekrota @ 2007-02-27 20:50 UTC (permalink / raw) To: bluez-users [-- Attachment #1.1: Type: text/plain, Size: 1321 bytes --] >> There is a lot of outdated doc out there for this. It has even been admitted >> here. >> What is the current sanctioned webpage or document that describes it? >BlueZ itself changed quite a lot in the last two years. Feel free to use >wiki.bluez.org to create some state of the art documentation. Well this is an official place I guess but it has little? I am not suggesting who should but thought an official place might contain at least the most recent pertinant info. To tell me to do it is a chicken/egg thing I know nothing. :) >> or what does rfcomm do and how >>what is the device named in rfcomm.conf? (the dongle?) >>Maybe the comment might say that if it is. >> Saying 'the device' is rather obtuse. >No idea what's your question. Be more specific. Ok rfcomm is the transport protocol? In the conf file does the 'device' describe the otherside ie headset, phone etc? or is it the address of dongle? It says just 'device' as comment in rfcomm.conf! To use a headset with my computer and a bt dongle does it require this device be defined in that file? Thanks for any help. This may not thread I still did not get the email. -Walt --------------------------------- Don't be flakey. Get Yahoo! Mail for Mobile and always stay connected to friends. [-- Attachment #1.2: Type: text/html, Size: 1601 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 164 bytes --] _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] current Bluez document describing 2007-02-27 20:50 ` [Bluez-users] current Bluez document describing walt shekrota @ 2007-02-27 22:56 ` Timur Alperovich 2007-02-28 14:09 ` walt shekrota 0 siblings, 1 reply; 5+ messages in thread From: Timur Alperovich @ 2007-02-27 22:56 UTC (permalink / raw) To: BlueZ users [-- Attachment #1.1: Type: text/plain, Size: 2255 bytes --] Hi there, When I was figuring out how to program some network apps over bluetooth the following guide seemed to be pretty helpful: http://people.csail.mit.edu/albert/bluez-intro/ Hope that helps, Timur On 2/27/07, walt shekrota <penguinacity@yahoo.com> wrote: > > >> There is a lot of outdated doc out there for this. It has even been > admitted > >> here. > >> What is the current sanctioned webpage or document that describes it? > > >BlueZ itself changed quite a lot in the last two years. Feel free to use > >wiki.bluez.org to create some state of the art documentation. > > Well this is an official place I guess but it has little? > I am not suggesting who should but thought an official place might > contain at least the most recent pertinant info. > To tell me to do it is a chicken/egg thing I know nothing. > :) > > >> or what does rfcomm do and how > >>what is the device named in rfcomm.conf? (the dongle?) > >>Maybe the comment might say that if it is. > >> Saying 'the device' is rather obtuse. > > >No idea what's your question. Be more specific. > > Ok rfcomm is the transport protocol? > In the conf file does the 'device' describe the otherside ie headset, > phone etc? > or is it the address of dongle? > It says just 'device' as comment in rfcomm.conf! > To use a headset with my computer and a bt dongle does it require this > device be > defined in that file? > > Thanks for any help. This may not thread I still did not get the email. > -Walt > > ------------------------------ > Don't be flakey. Get Yahoo! Mail for Mobile<http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/mail>and > always stay connected<http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/mail>to friends. > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > > [-- Attachment #1.2: Type: text/html, Size: 3554 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 164 bytes --] _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] current Bluez document describing 2007-02-27 22:56 ` Timur Alperovich @ 2007-02-28 14:09 ` walt shekrota 0 siblings, 0 replies; 5+ messages in thread From: walt shekrota @ 2007-02-28 14:09 UTC (permalink / raw) To: BlueZ users [-- Attachment #1.1: Type: text/plain, Size: 1039 bytes --] Timur Alperovich <timur.alperovich@gmail.com> wrote: Hi there, When I was figuring out how to program some network apps over bluetooth the following guide seemed to be pretty helpful: http://people.csail.mit.edu/albert/bluez-intro/ Hope that helps, Timur Thanks for that info! >No idea what's your question. Be more specific. Ok rfcomm is the transport protocol? In the conf file does the 'device' describe the otherside ie headset, phone etc? or is it the address of dongle? It says just 'device' as comment in rfcomm.conf! To use a headset with my computer and a bt dongle does it require this device be defined in that file? The thing I found redundant and confusing is that when communicating with a remote bt like a headset the address is set both in rfcomm.conf and as arg to btsco? Is my understanding incorrect? I did not see clear description of rfcomm.conf anywhere. Thanks -Walt --------------------------------- Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. [-- Attachment #1.2: Type: text/html, Size: 1588 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 164 bytes --] _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-02-28 14:09 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-02-25 16:10 [Bluez-users] current Bluez document describing penguinacity 2007-02-25 23:47 ` Marcel Holtmann -- strict thread matches above, loose matches on Subject: below -- 2007-02-27 20:16 [Bluez-users] pairing from bluez Choi Sonim 2007-02-27 20:50 ` [Bluez-users] current Bluez document describing walt shekrota 2007-02-27 22:56 ` Timur Alperovich 2007-02-28 14:09 ` walt shekrota
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox