* [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data
@ 2007-07-21 22:52 Todd Troxell
2007-07-25 12:22 ` Frederic Dalleau
0 siblings, 1 reply; 2+ messages in thread
From: Todd Troxell @ 2007-07-21 22:52 UTC (permalink / raw)
To: bluez-devel
[-- Attachment #1: Type: text/plain, Size: 521 bytes --]
Hello,
I'm connecting latest CVS a2dpd to an Alpine KCA100BT. It connects ok, pin
exchange ok, but when it starts to stream, I get:
A2DPD[16:37:05.324]: pollfd_cb_avrcpfd: socket 13: Connection from
31:98:D1:55:0C:00, mtu=610 accepted at index 0
A2DPD[16:37:06.288]: stream_client_send_pointer_resp: (errno=32:Broken
pipe)Error while sending data^M
A2DPD[16:37:06.288]: disconnect_client:
Full debug log is attached. Let me know if you'd like any further data.
Thanks,
--
Todd Troxell
http://rapidpacket.com/~xtat
[-- Attachment #2: alpine-kca100bt-a2dp.log --]
[-- Type: text/plain, Size: 8199 bytes --]
A2DPD[16:36:52.780]: init_ipc: Selected IPC: unix, addr=127.0.0.1, bcst=127.0.0.255, port=21453
A2DPD[16:36:52.780]: make_daemon_process: a2dpd [Jul 17 2007 23:50:20] starting ...
A2DPD[16:36:52.780]: main: (errno=13:Permission denied)a2dpd addr=00:0C:55:D1:98:31 timer=0 us [Jul 17 2007 23:50:22]
A2DPD[16:36:52.780]: a2dpd_signal_init: Getting on DBUS
A2DPD[16:36:52.784]: a2dpd_signal_init: Installing watch
A2DPD[16:36:52.784]: add_dbus_watch: Added watch 0 0x80b4930 disabled
A2DPD[16:36:52.784]: add_dbus_watch: Added watch 1 0x80b4958 enabled
A2DPD[16:36:52.784]: a2dpd_signal_init: Registering object path: /com/access/a2dpd
A2DPD[16:36:52.784]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
A2DPD[16:36:52.785]: a2dpd_signal_init: OK
A2DPD[16:36:52.785]: a2dpd_signal_init: OK
A2DPD[16:36:52.785]: a2dpd_register_sdp: Start
A2DPD[16:36:52.785]: add_avrtg:
A2DPD[16:36:52.787]: add_a2source:
A2DPD[16:36:52.787]: a2dpd_register_sdp: OK
A2DPD[16:36:52.787]: main_loop:
A2DPD[16:36:52.787]: make_server_socket:
A2DPD[16:36:52.787]: a2dpd_signal_state: Started 00:0C:55:D1:98:31
A2DPD[16:36:52.787]: bta2dpdevicenew:
A2DPD[16:36:52.787]: a2dpd_signal_address_changed: 00:0C:55:D1:98:31
A2DPD[16:36:52.787]: a2dpd_signal_set_socket: Signal socket set to 7
A2DPD[16:36:52.789]: a2dpd_signal_state: Disconnected
A2DPD[16:36:52.789]: a2dp_alloc:
A2DPD[16:36:52.789]: a2dp_alloc: (a2dp = 0x80b8280)
A2DPD[16:36:52.789]: a2dp_new: 00:0C:55:D1:98:31, 44100
A2DPD[16:36:52.789]: a2dp_new: State AVDTP_STATE_DISCONNECTED
A2DPD[16:36:52.789]: alsa_new:
A2DPD[16:36:52.789]: alsa_new: device=plughw:0,0, framerate=44100
A2DPD[16:36:52.789]: alsa_new: State ALSA_STATE_DISCONNECTED
A2DPD[16:36:52.789]: alsa_new: returning 0x80ba418
A2DPD[16:36:52.789]: sco_new:
A2DPD[16:36:52.789]: sco_new: State SCO_STATE_DISCONNECTED
A2DPD[16:36:52.789]: sco_state_disconnect: Filtering state : already disconnected
A2DPD[16:36:52.789]: main_loop: Bluetooth Device Settings [44100 hz, 2 channels, 16 bits]
A2DPD[16:36:52.791]: avrcp_new: Listening for AVRCP on socket 9
A2DPD[16:36:52.791]: avrcp_new: 0x80ba558
A2DPD[16:36:58.900]: a2dp_reset_encoding_buffer:
A2DPD[16:36:58.900]: pollfd_cb_sockfd: Client 10 got index 0
A2DPD[16:36:58.907]: stream_client_state_streamingsetup: PLAYBACK thread client_index=0, socket=10, id=0 started (44100 Hz, 2 channels, 16 bits, ring 65536, threshold 65536)
A2DPD[16:36:59.031]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[16:36:59.031]: a2dp_state_machine: Role is INITIATOR
A2DPD[16:36:59.031]: a2dp_state_machine: (errno=115:Operation now in progress)SDP connection on socket 11
A2DPD[16:36:59.031]: a2dp_state_machine: State AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[16:36:59.031]: a2dpd_signal_state: Connecting 00:0C:55:D1:98:31
A2DPD[16:37:02.728]: a2dp_state_machine: SDP connection terminated
A2DPD[16:37:02.784]: get_avdtp_psm: Parsing results
A2DPD[16:37:02.784]: get_avdtp_psm: Record
A2DPD[16:37:02.784]: get_avdtp_psm: Service Search OK
A2DPD[16:37:02.819]: get_avdtp_psm: Checking non spec audio
A2DPD[16:37:02.819]: a2dp_state_machine: Found psm 25
A2DPD[16:37:02.819]: a2dp_state_machine: State AVDTP_STATEX_CTL_CONNECTING
A2DPD[16:37:02.819]: a2dp_state_machine: Socket is 11
A2DPD[16:37:02.819]: a2dp_state_machine: (errno=115:Operation now in progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT
A2DPD[16:37:03.140]: a2dp_state_machine: State AVDTP_STATE_IDLE
A2DPD[16:37:03.144]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING
A2DPD[16:37:03.144]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING_RESP
A2DPD[16:37:03.288]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_DISCOVER)
A2DPD[16:37:03.288]: a2dp_state_machine: AVDTP_DISCOVER success
A2DPD[16:37:03.288]: a2dp_state_machine: State AVDTP_STATEX_GETTING_CAPABILITIES
A2DPD[16:37:03.288]: a2dp_state_machine: Getting capabilities for SEID=1
A2DPD[16:37:03.288]: a2dp_state_machine: State AVDTP_STATEX_GETTING_CAPABILITIES_RESP
A2DPD[16:37:03.380]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_GET_CAPABILITIES)
A2DPD[16:37:03.380]: a2dp_state_machine: AVDTP_GET_CAPABILITIES success for seid 1
A2DPD[16:37:03.380]: a2dp_state_machine: servcap_cap=1, servcap_len=0,
A2DPD[16:37:03.380]: a2dp_state_machine: cap_type=7, length=6
A2DPD[16:37:03.380]: a2dp_state_machine: media_type=0, codec=0
A2DPD[16:37:03.380]: a2dp_state_machine: A2DPD Prefered bitpool 32
A2DPD[16:37:03.380]: a2dp_state_machine: Device Prefered bitpool 2 -> 60
A2DPD[16:37:03.380]: a2dp_state_machine: A2DPD Selected bitpool 32
A2DPD[16:37:03.380]: a2dp_state_machine: State AVDTP_STATEX_SETTING_CONFIGURATION
A2DPD[16:37:03.380]: a2dp_state_machine: State AVDTP_STATEX_SETTING_CONFIGURATION_RESP
A2DPD[16:37:03.556]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_SET_CONFIGURATION)
A2DPD[16:37:03.556]: a2dp_state_machine: AVDTP_SET_CONFIGURATION success
A2DPD[16:37:03.556]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING
A2DPD[16:37:03.556]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING_RESP
A2DPD[16:37:03.704]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_OPEN)
A2DPD[16:37:03.704]: a2dp_state_machine: AVDTP_OPEN success
A2DPD[16:37:03.704]: a2dp_state_machine: State AVDTP_STATE_CONFIGURED
A2DPD[16:37:03.704]: a2dp_state_machine: State AVDTP_STATEX_STREAM_CONNECTING
A2DPD[16:37:03.708]: a2dp_state_machine: Socket is 12
A2DPD[16:37:03.708]: a2dp_state_machine: (errno=115:Operation now in progress)State AVDTP_STATEX_STREAM_CONNECTING_WAIT
A2DPD[16:37:04.012]: a2dp_state_machine: Stream connected
A2DPD[16:37:04.012]: get_socket_omtu: Socket 12 imtu=672, omtu=895, flush_to=65535
A2DPD[16:37:04.012]: a2dp_state_machine: State AVDTP_STATE_OPEN_START_STREAMING
A2DPD[16:37:04.012]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING
A2DPD[16:37:04.012]: a2dpd_signal_state: Connected 00:0C:55:D1:98:31
A2DPD[16:37:04.013]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING_WAIT
A2DPD[16:37:04.248]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_START)
A2DPD[16:37:04.248]: a2dp_state_machine: AVDTP_START success
A2DPD[16:37:04.248]: a2dp_state_machine: State AVDTP_STATE_STREAMING
A2DPD[16:37:04.248]: a2dp_transfer_raw: Samples starting
A2DPD[16:37:05.324]: get_socket_omtu: Socket 9 imtu=672, omtu=0, flush_to=65535
A2DPD[16:37:05.324]: pollfd_cb_avrcpfd: socket 13: Connection from 31:98:D1:55:0C:00, mtu=610 accepted at index 0
A2DPD[16:37:06.288]: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data
A2DPD[16:37:06.288]: disconnect_client:
[ctrl-c]
A2DPD[16:37:09.150]: sigint_handler: handling SIGINT
A2DPD[16:37:09.150]: main_loop: (errno=4:Interrupted system call)Poll ERROR
A2DPD[16:37:09.150]: a2dpd_signal_state: Ended
A2DPD[16:37:09.150]: alsa_destroy:
A2DPD[16:37:09.150]: alsa_state_disconnect: State ALSA_STATE_DISCONNECTED
A2DPD[16:37:09.150]: alsa_destroy: OK
A2DPD[16:37:09.150]: a2dp_destroy: a2dp = 0xbff37ba8
A2DPD[16:37:09.151]: a2dp_free: Disconnecting
A2DPD[16:37:09.151]: a2dp_disconnect:
A2DPD[16:37:09.151]: a2dp_stream_stop: Closing stream socket 12
A2DPD[16:37:09.151]: a2dp_stream_stop: Closed
A2DPD[16:37:09.151]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[16:37:09.151]: a2dp_disconnect: Closing ctl socket 11
A2DPD[16:37:09.151]: a2dp_disconnect: Closed
A2DPD[16:37:09.151]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[16:37:09.151]: a2dp_free: Freeing sbc
A2DPD[16:37:09.151]: a2dp_free: (a2dp = 0x80b8280)
A2DPD[16:37:09.151]: a2dp_free: OK
A2DPD[16:37:09.151]: sco_destroy: sco = 0xbff37bac
A2DPD[16:37:09.151]: sco_free: Disconnecting
A2DPD[16:37:09.151]: sco_free: (sco = 0x80ba528)
A2DPD[16:37:09.151]: avrcp_destroy: Closing socket 13
A2DPD[16:37:09.151]: avrcp_destroy: 0x80ba558
A2DPD[16:37:09.151]: a2dpd_signal_set_socket: Signal socket set to -1
A2DPD[16:37:09.151]: a2dpd_unregister_sdp: Start
A2DPD[16:37:09.152]: a2dpd_unregister_sdp: OK
A2DPD[16:37:09.152]: a2dpd_signal_kill: OK
A2DPD[16:37:09.152]: main: Terminated succesfully
[-- Attachment #3: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #4: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data
2007-07-21 22:52 [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data Todd Troxell
@ 2007-07-25 12:22 ` Frederic Dalleau
0 siblings, 0 replies; 2+ messages in thread
From: Frederic Dalleau @ 2007-07-25 12:22 UTC (permalink / raw)
To: BlueZ development
The link between the alsa plugin and a2dpd seems broken.
You can modify .asoundrc as follow to get more informations
pcm.yourpluginnamehere {
type a2dpd
debug 255
}
Trying another player might help.
Frederic
On Sat, 2007-07-21 at 17:52 -0500, Todd Troxell wrote:
> Hello,
>
> I'm connecting latest CVS a2dpd to an Alpine KCA100BT. It connects ok, pin
> exchange ok, but when it starts to stream, I get:
>
> A2DPD[16:37:05.324]: pollfd_cb_avrcpfd: socket 13: Connection from
> 31:98:D1:55:0C:00, mtu=610 accepted at index 0
> A2DPD[16:37:06.288]: stream_client_send_pointer_resp: (errno=32:Broken
> pipe)Error while sending data^M
> A2DPD[16:37:06.288]: disconnect_client:
>
> Full debug log is attached. Let me know if you'd like any further data.
>
> Thanks,
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-07-25 12:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-21 22:52 [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data Todd Troxell
2007-07-25 12:22 ` Frederic Dalleau
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox