public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: martin f krafft <madduck@madduck.net>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: [Bluez-devel] btusb+sco failing to play sound through Jabra BT500v headset (was:	 SCO flowcontrol patch v4.4 on 2.6.25/6 causes)	hardlocks when connecting to BT device
Date: Tue, 26 Aug 2008 17:35:45 +0100	[thread overview]
Message-ID: <20080826163544.GA5068@lapse.rw.madduck.net> (raw)
In-Reply-To: <1219394015.7591.441.camel@violet.holtmann.net>


[-- Attachment #1.1: Type: text/plain, Size: 1461 bytes --]

also sprach Marcel Holtmann <marcel@holtmann.org> [2008.08.22.0933 +0100]:
> what about not using that patch at all? I am using the new audio
> interface without that patch. And you wanna use the btusb driver
> and since 2.6.27-rc4 that one actually has SCO support.

If I had known... :)

Unfortunately, I have not yet succeeded. I modprobed 'sco' and then
ran headsetd as before, but that just prints

  headsetd[9417]: Bluetooth headset daemon version 0.5
  headsetd[9417]: Configuration phase ended: target bdaddr is 00:1A:45:14:EE:D7, timeout is 90000 ms
  headsetd[9417]: Changing state: Idle-->Paging
  headsetd[9417]: Changing state: Paging-->Connecting
  headsetd[9417]: Changing state: Connecting-->Ready
  headsetd[9417]: Changing state: Ready-->Opening

At this point, the headset makes the sound it makes when
a connection is established, but there is no sound coming from it.

After about 40 seconds, the client says:

  aplay: main:564: audio open error: Connection timed out

and headsetd writes:

  headsetd[9417]: unable to open SCO channel to headset: Connection timed out
  headsetd[9417]: Changing state: Opening-->ZombieAppl
  headsetd[9417]: Appli closed socket
  headsetd[9417]: Changing state: ZombieAppl-->Idle

So something's still broken... :(

-- 
martin | http://madduck.net/ | http://two.sentenc.es/
 
never underestimate the power of human stupidity.
 
spamtraps: madduck.bogus@madduck.net

[-- Attachment #1.2: Digital signature (see http://martin-krafft.net/gpg/) --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 363 bytes --]

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2008-08-26 16:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-22  7:36 [Bluez-devel] SCO flowcontrol patch v4.4 on 2.6.25/6 causes hardlocks when connecting to BT device martin f krafft
2008-08-22  8:33 ` Marcel Holtmann
2008-08-26 16:35   ` martin f krafft [this message]
2008-08-26 17:19     ` [Bluez-devel] btusb+sco failing to play sound through Jabra BT500v headset (was: SCO flowcontrol patch v4.4 on 2.6.25/6 causes) " Marcel Holtmann
2008-08-26 20:34       ` martin f krafft
2008-08-27  5:18         ` Marcel Holtmann
2008-08-27 21:03           ` martin f krafft
2008-09-05 16:26       ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset (was: btusb+sco failing to play sound through Jabra BT500v headset) martin f krafft
2008-09-05 17:00         ` Marcel Holtmann
2008-09-08 20:33           ` martin f krafft
2008-09-23 13:00           ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset martin f krafft
2008-09-23 13:37             ` Stuart Pook
2008-09-29 21:41             ` SCO headset, bluez-4.9 & linux 2.6.27-rc7 -> Unable to install hw params Stuart Pook

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080826163544.GA5068@lapse.rw.madduck.net \
    --to=madduck@madduck.net \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox