From: Stuart Pook <kernel6org@pook.es>
To: BlueZ development <linux-bluetooth@vger.kernel.org>
Cc: martin f krafft <madduck@madduck.net>
Subject: SCO headset, bluez-4.9 & linux 2.6.27-rc7 -> Unable to install hw params
Date: Mon, 29 Sep 2008 23:41:21 +0200 [thread overview]
Message-ID: <48E14B81.5020206@pook.es> (raw)
In-Reply-To: <20080923130000.GA848@piper.oerlikon.madduck.net>
Hi
I've installed bluez 4.9 and linux kernel 2.6.27-rc7 and I still cannot get any
sound out of my Jabra JX10 bluetooth headset connected via a Cambridge Silicon
Radio Bluetooth Dongle (0a12:0001). Bluetoothd says "connect: Operation
not permitted" and aplay "Unable to install hw params".
What should I try next? I think that I'm missing something stupid.
thanks for any help (or requests for more information)
Stuart
PS BTW, if use bluez 4.4 & linux 2.6.26, aplay works, if I use bluez 4.7 and
linux 2.6.26, aplay fails.
Bluetoothd says
bluetoothd[24162]: Accepted new client connection on unix socket (fd=23)
bluetoothd[24162]: Audio API: received BT_GETCAPABILITIES_REQ
bluetoothd[24162]: Audio API: sending BT_GETCAPABILITIES_RSP
bluetoothd[24162]: Audio API: received BT_SETCONFIGURATION_REQ
bluetoothd[24162]: config sco - device = 00:1A:45:2F:49:98 access_mode = 2
bluetoothd[24162]: /org/bluez/hci0/dev_00_1A_45_2F_49_98: Connecting to 00:1A:45:2F:49:98 channel 1
bluetoothd[24162]: State changed /org/bluez/hci0/dev_00_1A_45_2F_49_98: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[24162]: adapter_get_device(00:1A:45:2F:49:98)
bluetoothd[24162]: link_key_request (sba=00:0C:41:E1:FF:30, dba=00:1A:45:2F:49:98)
bluetoothd[24162]: kernel auth requirements = 0x04
bluetoothd[24162]: stored link key type = 0x00
bluetoothd[24162]: /org/bluez/hci0/dev_00_1A_45_2F_49_98: Connected to 00:1A:45:2F:49:98
bluetoothd[24162]: Received AT+BRSF=27
bluetoothd[24162]: HFP HF features: "EC and/or NR function" "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control"
bluetoothd[24162]: Received AT+CIND=?
bluetoothd[24162]: Received AT+CIND?
bluetoothd[24162]: Received AT+CMER=3, 0, 0, 1
bluetoothd[24162]: Event reporting (CMER): mode=3, ind=1
bluetoothd[24162]: HFP Service Level Connection established
bluetoothd[24162]: State changed /org/bluez/hci0/dev_00_1A_45_2F_49_98: HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED
bluetoothd[24162]: connect: Operation not permitted (1)
bluetoothd[24162]: config failed
bluetoothd[24162]: Audio API: sending BT_SETCONFIGURATION_RSP
bluetoothd[24162]: Unix client disconnected (fd=23)
bluetoothd[24162]: Received AT+VGS=00
aplay says:
Playing WAVE 'alarm.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
ALSA lib pcm_bluetooth.c:464:(bluetooth_hsp_hw_params) BT_SETCONFIGURATION failed : Input/output error(5)
aplay: set_params:979: Unable to install hw params:
The second time I run aplay the error messages arrives more quickly:
bluetoothd[24162]: Accepted new client connection on unix socket (fd=23)
bluetoothd[24162]: Audio API: received BT_GETCAPABILITIES_REQ
bluetoothd[24162]: Audio API: sending BT_GETCAPABILITIES_RSP
bluetoothd[24162]: Audio API: received BT_SETCONFIGURATION_REQ
bluetoothd[24162]: config sco - device = 00:1A:45:2F:49:98 access_mode = 2
bluetoothd[24162]: connect: Operation not permitted (1)
bluetoothd[24162]: config failed
bluetoothd[24162]: Audio API: sending BT_SETCONFIGURATION_RSP
bluetoothd[24162]: Unix client disconnected (fd=23)
hcidump -XV doesn't show anything that looks like an error to me:
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:1A:45:2F:49:98 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 00:1A:45:2F:49:98 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 41
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:1A:45:2F:49:98 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 41 slots 5
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1A:45:2F:49:98 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 41
Features: 0xbf 0xfe 0x8b 0xf8 0x1b 0x18 0x00 0x80
< ACL data: handle 41 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x008c scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1A:45:2F:49:98 name 'Jabra JX10 series 2'
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:1A:45:2F:49:98
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:1A:45:2F:49:98 key F63331CE2D0DBCA190DC73C930CD6117
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:1A:45:2F:49:98
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x008c scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x008c flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1013
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x008c flags 0x00 result 0 clen 4
MTU 1013
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x008c len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x008c len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1008 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 127 max_retrans 0 credits 0
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x008c len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x008c len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x008c len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x008c len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 11 fcs 0x40
0000: 41 54 2b 42 52 53 46 3d 32 37 0d AT+BRSF=27.
< ACL data: handle 41 flags 0x02 dlen 19
L2CAP(d): cid 0x008c len 15 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 11 fcs 0x9a
0000: 0d 0a 2b 42 52 53 46 3d 30 0d 0a ..+BRSF=0..
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x008c len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 2
0000: 41 54 2b 43 49 4e 44 3d 3f 0d AT+CIND=?.
< ACL data: handle 41 flags 0x02 dlen 135
L2CAP(d): cid 0x008c len 131 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 127 fcs 0x9a
0000: 0d 0a 2b 43 49 4e 44 3a 28 22 62 61 74 74 63 68 ..+CIND:("battch
0010: 67 22 2c 28 30 2d 35 29 29 2c 28 22 73 69 67 6e g",(0-5)),("sign
0020: 61 6c 22 2c 28 30 2d 35 29 29 2c 28 22 73 65 72 al",(0-5)),("ser
0030: 76 69 63 65 22 2c 28 30 2c 31 29 29 2c 28 22 63 vice",(0,1)),("c
0040: 61 6c 6c 22 2c 28 30 2c 31 29 29 2c 28 22 63 61 all",(0,1)),("ca
0050: 6c 6c 73 65 74 75 70 22 2c 28 30 2d 33 29 29 2c llsetup",(0-3)),
0060: 28 22 63 61 6c 6c 68 65 6c 64 22 2c 28 30 2d 32 ("callheld",(0-2
0070: 29 29 2c 28 22 72 6f 61 6d 22 2c 28 30 2c 31 )),("roam",(0,1
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x008c len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
0000: 29 29 0d 0a ))..
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x008c len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 9 fcs 0x5c credits 3
0000: 41 54 2b 43 49 4e 44 3f 0d AT+CIND?.
< ACL data: handle 41 flags 0x02 dlen 31
L2CAP(d): cid 0x008c len 27 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 23 fcs 0x9a
0000: 0d 0a 2b 43 49 4e 44 3a 35 2c 35 2c 31 2c 30 2c ..+CIND:5,5,1,0,
0010: 30 2c 30 2c 30 0d 0a 0,0,0..
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x008c len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 28
L2CAP(d): cid 0x0040 len 24 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 19 fcs 0x5c credits 2
0000: 41 54 2b 43 4d 45 52 3d 33 2c 20 30 2c 20 30 2c AT+CMER=3, 0, 0,
0010: 20 31 0d 1.
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x008c len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 30 30 0d AT+VGS=00.
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x008c len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
prev parent reply other threads:[~2008-09-29 21:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-22 7:36 [Bluez-devel] SCO flowcontrol patch v4.4 on 2.6.25/6 causes hardlocks when connecting to BT device martin f krafft
2008-08-22 8:33 ` Marcel Holtmann
2008-08-26 16:35 ` [Bluez-devel] btusb+sco failing to play sound through Jabra BT500v headset (was: SCO flowcontrol patch v4.4 on 2.6.25/6 causes) " martin f krafft
2008-08-26 17:19 ` Marcel Holtmann
2008-08-26 20:34 ` martin f krafft
2008-08-27 5:18 ` Marcel Holtmann
2008-08-27 21:03 ` martin f krafft
2008-09-05 16:26 ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset (was: btusb+sco failing to play sound through Jabra BT500v headset) martin f krafft
2008-09-05 17:00 ` Marcel Holtmann
2008-09-08 20:33 ` martin f krafft
2008-09-23 13:00 ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset martin f krafft
2008-09-23 13:37 ` Stuart Pook
2008-09-29 21:41 ` Stuart Pook [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48E14B81.5020206@pook.es \
--to=kernel6org@pook.es \
--cc=linux-bluetooth@vger.kernel.org \
--cc=madduck@madduck.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox