From: Gustavo Evgucci <monesss315@gmail.com>
To: Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
Paul Menzel <pmenzel@molgen.mpg.de>,
Gustavo Evgucci <monesss315@gmail.com>
Subject: [PATCH v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922
Date: Thu, 25 Jun 2026 11:32:30 +0300 [thread overview]
Message-ID: <20260625083230.300651-1-monesss315@gmail.com> (raw)
In-Reply-To: <20260623114937.6385-1-monesss315@gmail.com>
The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not
recognized as a MediaTek device because it is missing from the btusb
device ID table. As a result, btmtk firmware loading is never triggered
and the HCI reset command times out with -ETIMEDOUT.
Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags,
consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630
entries which use the same chip.
Tested on: MediaTek MT7922 (Wi-Fi 6E combo card, IMC Networks BT USB
interface), kernel 7.0.11-arch1-1.
/sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=12 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3625 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Gustavo Evgucci <monesss315@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
Notes:
v2:
- Add /sys/kernel/debug/usb/devices output to the commit message (Paul Menzel)
- Add Reviewed-by: Paul Menzel
- Resend to all maintainers from scripts/get_maintainer.pl
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7f14ce9..f829203 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -798,6 +798,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3613), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3625), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3627), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
--
2.54.0
next prev parent reply other threads:[~2026-06-25 8:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-23 11:49 [PATCH] Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625 monesss315
2026-06-23 12:46 ` bluez.test.bot
2026-06-23 14:48 ` [PATCH] " Paul Menzel
2026-06-25 8:32 ` Gustavo Evgucci [this message]
2026-06-25 10:16 ` [v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922 bluez.test.bot
2026-06-26 11:16 ` [PATCH v2] " patchwork-bot+bluetooth
2026-06-26 11:16 ` [PATCH] Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625 patchwork-bot+bluetooth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260625083230.300651-1-monesss315@gmail.com \
--to=monesss315@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=pmenzel@molgen.mpg.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox