[PATCH v2 1/3] Bluetooth: Add support for Shorter Connection Interval (SCI) feature

[PATCH v2 1/3] Bluetooth: Add support for Shorter Connection Interval (SCI) feature

[Luiz Augusto von Dentz]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add HCI command, event and feature bit definitions for the Bluetooth
6.2 Shorter Connection Interval feature:

Commands:
 - HCI_OP_LE_CONN_RATE (0x20a1) - Connection Rate Request
 - HCI_OP_LE_SET_DEF_RATE (0x20a2) - Set Default Rate Parameters
 - HCI_OP_LE_READ_CONN_INTERVAL (0x20a3) - Read Min Supported
   Connection Interval

Events:
 - HCI_EVT_LE_CONN_RATE_CHANGE (0x37) - Connection Rate Change

Feature bits:
 - HCI_LE_SCI - Shorter Connection Intervals
 - HCI_LE_SCI_HOST - Shorter Connection Intervals (Host Support)

During controller init, when SCI is supported:
 - Set Shorter Connection Intervals (Host Support) feature via
   LE Set Host Feature
 - Read Minimum Supported Connection Interval
 - Set Default Rate Parameters

The Connection Rate Change event handler updates the connection
interval, latency and supervision timeout on the hci_conn.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      | 53 ++++++++++++++++++++++++++++++++
 include/net/bluetooth/hci_core.h |  3 ++
 net/bluetooth/hci_event.c        | 27 ++++++++++++++++
 net/bluetooth/hci_sync.c         | 53 ++++++++++++++++++++++++++++++--
 4 files changed, 134 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 50f0eef71fb1..f895278c268f 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -653,6 +653,8 @@ enum {
 #define HCI_LE_LL_EXT_FEATURE		0x80
 #define HCI_LE_CS			0x40
 #define HCI_LE_CS_HOST			0x80
+#define HCI_LE_SCI			0x01	/* byte 9 - Shorter Connection Intervals */
+#define HCI_LE_SCI_HOST			0x02	/* byte 9 - Shorter Connection Intervals (Host) */
 
 /* Connection modes */
 #define HCI_CM_ACTIVE	0x0000
@@ -2489,6 +2491,46 @@ struct hci_cp_le_set_host_feature_v2 {
 	__u8	bit_value;
 } __packed;
 
+#define HCI_OP_LE_CONN_RATE			0x20a1
+struct hci_cp_le_conn_rate {
+	__le16	handle;
+	__le16	interval_min;
+	__le16	interval_max;
+	__le16	subrate_min;
+	__le16	subrate_max;
+	__le16	max_latency;
+	__le16	cont_num;
+	__le16	supv_timeout;
+	__le16	min_ce_len;
+	__le16	max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_SET_DEF_RATE			0x20a2
+struct hci_cp_le_set_def_rate {
+	__le16	interval_min;
+	__le16	interval_max;
+	__le16	subrate_min;
+	__le16	subrate_max;
+	__le16	max_latency;
+	__le16	cont_num;
+	__le16	supv_timeout;
+	__le16	min_ce_len;
+	__le16	max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_READ_CONN_INTERVAL		0x20a3
+struct hci_le_conn_interval_group {
+	__le16	min;
+	__le16	max;
+	__le16	stride;
+} __packed;
+
+struct hci_rp_le_read_conn_interval {
+	__u8	status;
+	__u8	num_grps;
+	struct hci_le_conn_interval_group grps[];
+} __packed;
+
 /* ---- HCI Events ---- */
 struct hci_ev_status {
 	__u8    status;
@@ -3303,6 +3345,17 @@ struct hci_evt_le_cs_test_end_complete {
 	__u8	status;
 } __packed;
 
+#define HCI_EVT_LE_CONN_RATE_CHANGE			0x37
+struct hci_evt_le_conn_rate_change {
+	__u8	status;
+	__le16	handle;
+	__le16	interval;
+	__le16	subrate;
+	__le16	latency;
+	__le16	cont_number;
+	__le16	supv_timeout;
+} __packed;
+
 #define HCI_EV_VENDOR			0xff
 
 /* Internal events generated by Bluetooth stack */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index e7133ff87fbf..7e58acb65f48 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -2077,6 +2077,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define le_cs_host_capable(dev) \
 	((dev)->le_features[5] & HCI_LE_CS_HOST)
 
+#define le_sci_capable(dev) \
+	((dev)->le_features[9] & HCI_LE_SCI)
+
 #define mws_transport_config_capable(dev) (((dev)->commands[30] & 0x08) && \
 	(!hci_test_quirk((dev), HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG)))
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index ea858391c789..a2da7876b6b4 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -7363,6 +7363,29 @@ static void hci_le_read_all_remote_features_evt(struct hci_dev *hdev,
 	hci_dev_unlock(hdev);
 }
 
+static void hci_le_conn_rate_change_evt(struct hci_dev *hdev, void *data,
+					struct sk_buff *skb)
+{
+	struct hci_evt_le_conn_rate_change *ev = data;
+	struct hci_conn *conn;
+
+	bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
+
+	if (ev->status)
+		return;
+
+	hci_dev_lock(hdev);
+
+	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
+	if (conn) {
+		conn->le_conn_interval = le16_to_cpu(ev->interval);
+		conn->le_conn_latency = le16_to_cpu(ev->latency);
+		conn->le_supv_timeout = le16_to_cpu(ev->supv_timeout);
+	}
+
+	hci_dev_unlock(hdev);
+}
+
 #define HCI_LE_EV_VL(_op, _func, _min_len, _max_len) \
 [_op] = { \
 	.func = _func, \
@@ -7474,6 +7497,10 @@ static const struct hci_le_ev {
 		     sizeof(struct
 			    hci_evt_le_read_all_remote_features_complete),
 		     HCI_MAX_EVENT_SIZE),
+	/* [0x37 = HCI_EVT_LE_CONN_RATE_CHANGE] */
+	HCI_LE_EV(HCI_EVT_LE_CONN_RATE_CHANGE,
+		   hci_le_conn_rate_change_evt,
+		   sizeof(struct hci_evt_le_conn_rate_change)),
 };
 
 static void hci_le_meta_evt(struct hci_dev *hdev, void *data,
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 7a33513f1fc7..9dfab81e40f8 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4478,6 +4478,10 @@ static int hci_le_set_event_mask_sync(struct hci_dev *hdev)
 		events[6] |= 0x02;	/* LE CS Subevent Result Continue event */
 		events[6] |= 0x04;	/* LE CS Test End Complete event */
 	}
+
+	if (le_sci_capable(hdev))
+		events[6] |= 0x40;	/* LE Connection Rate Change event */
+
 	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EVENT_MASK,
 				     sizeof(events), events, HCI_CMD_TIMEOUT);
 }
@@ -4646,12 +4650,46 @@ static int hci_le_set_host_feature_sync(struct hci_dev *hdev, u16 bit, u8 value)
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
 
+static int hci_le_read_conn_interval_sync(struct hci_dev *hdev)
+{
+	if (!le_sci_capable(hdev))
+		return 0;
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_CONN_INTERVAL,
+				     0, NULL, HCI_CMD_TIMEOUT);
+}
+
+static int hci_le_set_def_rate_sync(struct hci_dev *hdev)
+{
+	struct hci_cp_le_set_def_rate cp;
+
+	if (!le_sci_capable(hdev))
+		return 0;
+
+	memset(&cp, 0, sizeof(cp));
+
+	/* Use the HIDS 1.2 recommended Full Range mode values as the default
+	 * rate parameters (see HOGP v1.2 spec). Connection intervals are in
+	 * units of 0.125 ms and the supervision timeout is in units of 10 ms.
+	 */
+	cp.interval_min = cpu_to_le16(0x000a);	/* 1.25 ms */
+	cp.interval_max = cpu_to_le16(0x0078);	/* 15 ms */
+	cp.subrate_min = cpu_to_le16(0x0001);
+	cp.subrate_max = cpu_to_le16(0x0004);
+	cp.max_latency = cpu_to_le16(0x0000);
+	cp.cont_num = cpu_to_le16(0x0001);
+	cp.supv_timeout = cpu_to_le16(0x000c);	/* 120 ms */
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_DEF_RATE,
+				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
+
 /* Set Host Features, each feature needs to be sent separately since
  * HCI_OP_LE_SET_HOST_FEATURE doesn't support setting all of them at once.
  */
 static int hci_le_set_host_features_sync(struct hci_dev *hdev)
 {
-	int err;
+	int err = 0;
 
 	if (cis_capable(hdev)) {
 		/* Connected Isochronous Channels (Host Support) */
@@ -4662,9 +4700,16 @@ static int hci_le_set_host_features_sync(struct hci_dev *hdev)
 			return err;
 	}
 
-	if (le_cs_capable(hdev))
+	if (le_cs_capable(hdev)) {
 		/* Channel Sounding (Host Support) */
 		err = hci_le_set_host_feature_sync(hdev, 47, 0x01);
+		if (err)
+			return err;
+	}
+
+	if (le_sci_capable(hdev))
+		/* Shorter Connection Intervals (Host Support) */
+		err = hci_le_set_host_feature_sync(hdev, 73, 0x01);
 
 	return err;
 }
@@ -4697,6 +4742,10 @@ static const struct hci_init_stage le_init3[] = {
 	HCI_INIT(hci_set_le_support_sync),
 	/* HCI_OP_LE_SET_HOST_FEATURE */
 	HCI_INIT(hci_le_set_host_features_sync),
+	/* HCI_OP_LE_READ_CONN_INTERVAL */
+	HCI_INIT(hci_le_read_conn_interval_sync),
+	/* HCI_OP_LE_SET_DEF_RATE */
+	HCI_INIT(hci_le_set_def_rate_sync),
 	{}
 };
 
-- 
2.54.0

[PATCH v2 2/3] Bluetooth: Add MGMT Shorter Connection Interval setting

[Luiz Augusto von Dentz]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add MGMT_SETTING_SCI (bit 25) to advertise support for the Shorter
Connection Interval (SCI) feature. It is reported in the supported
settings whenever the controller is SCI capable, and in the current
settings whenever LE is enabled and the controller is SCI capable
(SCI has no separate enable command, so it is a passive capability).

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci_core.h | 2 ++
 include/net/bluetooth/mgmt.h     | 1 +
 net/bluetooth/mgmt.c             | 6 ++++++
 3 files changed, 9 insertions(+)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 7e58acb65f48..de0eb0ca5918 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -2079,6 +2079,8 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 
 #define le_sci_capable(dev) \
 	((dev)->le_features[9] & HCI_LE_SCI)
+#define le_sci_enabled(dev) \
+	(le_enabled(dev) && le_sci_capable(dev))
 
 #define mws_transport_config_capable(dev) (((dev)->commands[30] & 0x08) && \
 	(!hci_test_quirk((dev), HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG)))
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index 08daed7a96d5..b285441db55b 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -118,6 +118,7 @@ struct mgmt_rp_read_index_list {
 #define MGMT_SETTING_LL_PRIVACY		BIT(22)
 #define MGMT_SETTING_PAST_SENDER	BIT(23)
 #define MGMT_SETTING_PAST_RECEIVER	BIT(24)
+#define MGMT_SETTING_SCI		BIT(25)
 
 #define MGMT_OP_READ_INFO		0x0004
 #define MGMT_READ_INFO_SIZE		0
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 4fd37ac79986..58f01fbfcf71 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -861,6 +861,9 @@ static u32 get_supported_settings(struct hci_dev *hdev)
 	if (past_receiver_capable(hdev))
 		settings |= MGMT_SETTING_PAST_RECEIVER;
 
+	if (le_sci_capable(hdev))
+		settings |= MGMT_SETTING_SCI;
+
 	settings |= MGMT_SETTING_PHY_CONFIGURATION;
 
 	return settings;
@@ -952,6 +955,9 @@ static u32 get_current_settings(struct hci_dev *hdev)
 	if (past_receiver_enabled(hdev))
 		settings |= MGMT_SETTING_PAST_RECEIVER;
 
+	if (le_sci_enabled(hdev))
+		settings |= MGMT_SETTING_SCI;
+
 	return settings;
 }
 
-- 
2.54.0

[PATCH v2 3/3] Bluetooth: Add MGMT Load Connection Subrate command

[Luiz Augusto von Dentz]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add MGMT_OP_LOAD_CONN_SUBRATE (0x005C) command to load per-device
connection subrate parameters when the SCI feature is supported.

Add MGMT_EV_CONN_SUBRATE (0x0033) event to notify userspace when
connection rate changes occur via the LE Connection Rate Change HCI
event.

Add subrate fields (subrate_min, subrate_max, max_latency, cont_num)
to struct hci_conn_params to store the loaded subrate parameters, and
the corresponding le_rate_* fields to struct hci_conn to track the
parameters currently in use.

When a single entry is loaded for an already-connected central, or on
connection completion, the LE Connection Rate Request procedure is
initiated to apply the parameters.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci_core.h |  15 ++++
 include/net/bluetooth/hci_sync.h |   1 +
 include/net/bluetooth/mgmt.h     |  28 +++++++
 net/bluetooth/hci_event.c        |  30 ++++++--
 net/bluetooth/hci_sync.c         |  62 +++++++++++++++
 net/bluetooth/mgmt.c             | 128 +++++++++++++++++++++++++++++++
 6 files changed, 258 insertions(+), 6 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index de0eb0ca5918..a5ea461f45c9 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -720,6 +720,11 @@ struct hci_conn {
 	__u16		le_conn_interval;
 	__u16		le_conn_latency;
 	__u16		le_supv_timeout;
+	__u16		le_rate_interval;
+	__u16		le_subrate;
+	__u16		le_rate_latency;
+	__u16		le_cont_num;
+	__u16		le_rate_supv_timeout;
 	__u8		le_adv_data[HCI_MAX_EXT_AD_LENGTH];
 	__u8		le_adv_data_len;
 	__u8		le_per_adv_data[HCI_MAX_PER_AD_TOT_LEN];
@@ -810,6 +815,14 @@ struct hci_conn_params {
 	u16 conn_latency;
 	u16 supervision_timeout;
 
+	u16 rate_min_interval;
+	u16 rate_max_interval;
+	u16 subrate_min;
+	u16 subrate_max;
+	u16 max_latency;
+	u16 cont_num;
+	u16 rate_supv_timeout;
+
 	enum {
 		HCI_AUTO_CONN_DISABLED,
 		HCI_AUTO_CONN_REPORT,
@@ -2497,6 +2510,8 @@ void mgmt_advertising_removed(struct sock *sk, struct hci_dev *hdev,
 int mgmt_phy_configuration_changed(struct hci_dev *hdev, struct sock *skip);
 void mgmt_adv_monitor_device_lost(struct hci_dev *hdev, u16 handle,
 				  bdaddr_t *bdaddr, u8 addr_type);
+void mgmt_conn_subrate_notify(struct hci_dev *hdev, struct hci_conn *conn,
+			      u8 status);
 
 int hci_abort_conn(struct hci_conn *conn, u8 reason);
 void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index 0756d6fe77d4..a6579a868678 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -183,6 +183,7 @@ int hci_connect_le_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_cancel_connect_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 			    struct hci_conn_params *params);
+int hci_le_conn_rate_request(struct hci_dev *hdev, struct hci_conn *conn);
 
 int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn);
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index b285441db55b..1e22eab1081c 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -894,6 +894,23 @@ struct mgmt_cp_hci_cmd_sync {
 } __packed;
 #define MGMT_HCI_CMD_SYNC_SIZE		6
 
+#define MGMT_OP_LOAD_CONN_SUBRATE	0x005C
+struct mgmt_conn_subrate {
+	struct mgmt_addr_info addr;
+	__le16 min_interval;
+	__le16 max_interval;
+	__le16 subrate_min;
+	__le16 subrate_max;
+	__le16 max_latency;
+	__le16 cont_num;
+	__le16 supv_timeout;
+} __packed;
+struct mgmt_cp_load_conn_subrate {
+	__le16 param_count;
+	struct mgmt_conn_subrate params[] __counted_by_le(param_count);
+} __packed;
+#define MGMT_LOAD_CONN_SUBRATE_SIZE	2
+
 #define MGMT_EV_CMD_COMPLETE		0x0001
 struct mgmt_ev_cmd_complete {
 	__le16	opcode;
@@ -1193,3 +1210,14 @@ struct mgmt_ev_mesh_device_found {
 struct mgmt_ev_mesh_pkt_cmplt {
 	__u8	handle;
 } __packed;
+
+#define MGMT_EV_CONN_SUBRATE			0x0033
+struct mgmt_ev_conn_subrate {
+	struct mgmt_addr_info addr;
+	__u8	status;
+	__le16	interval;
+	__le16	subrate;
+	__le16	latency;
+	__le16	cont_num;
+	__le16	supv_timeout;
+} __packed;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index a2da7876b6b4..734a91c3351f 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5867,6 +5867,17 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
 		}
 	}
 
+	/* If we are central and have subrate parameters stored, queue a
+	 * connection rate request to apply them.
+	 */
+	if (conn->role == HCI_ROLE_MASTER && le_sci_capable(hdev)) {
+		struct hci_conn_params *p;
+
+		p = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
+		if (p && p->subrate_max)
+			hci_le_conn_rate_request(hdev, conn);
+	}
+
 unlock:
 	hci_update_passive_scan(hdev);
 	hci_dev_unlock(hdev);
@@ -7371,16 +7382,23 @@ static void hci_le_conn_rate_change_evt(struct hci_dev *hdev, void *data,
 
 	bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
 
-	if (ev->status)
-		return;
-
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
 	if (conn) {
-		conn->le_conn_interval = le16_to_cpu(ev->interval);
-		conn->le_conn_latency = le16_to_cpu(ev->latency);
-		conn->le_supv_timeout = le16_to_cpu(ev->supv_timeout);
+		/* Only update the stored rate parameters on success; on
+		 * failure the values in the event are not valid. Userspace is
+		 * notified either way.
+		 */
+		if (!ev->status) {
+			conn->le_rate_interval = le16_to_cpu(ev->interval);
+			conn->le_subrate = le16_to_cpu(ev->subrate);
+			conn->le_rate_latency = le16_to_cpu(ev->latency);
+			conn->le_cont_num = le16_to_cpu(ev->cont_number);
+			conn->le_rate_supv_timeout =
+				le16_to_cpu(ev->supv_timeout);
+		}
+		mgmt_conn_subrate_notify(hdev, conn, ev->status);
 	}
 
 	hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 9dfab81e40f8..27e23cde7a5e 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -7274,6 +7274,68 @@ int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
 
+static int hci_le_conn_rate_request_sync(struct hci_dev *hdev, void *data)
+{
+	struct hci_conn *conn = data;
+	struct hci_conn_params *params;
+	struct hci_cp_le_conn_rate cp;
+
+	hci_dev_lock(hdev);
+
+	/* Re-lookup the connection parameters under hdev->lock since the
+	 * request was queued asynchronously and the entry may have been
+	 * removed in the meantime (e.g. by Load Connection Parameters).
+	 * Snapshot the rate values so the blocking command below can run
+	 * without holding hdev->lock.
+	 */
+	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
+	if (!params) {
+		hci_dev_unlock(hdev);
+		return -ECANCELED;
+	}
+
+	memset(&cp, 0, sizeof(cp));
+	cp.handle	= cpu_to_le16(conn->handle);
+	cp.interval_min	= cpu_to_le16(params->rate_min_interval);
+	cp.interval_max	= cpu_to_le16(params->rate_max_interval);
+	cp.subrate_min	= cpu_to_le16(params->subrate_min);
+	cp.subrate_max	= cpu_to_le16(params->subrate_max);
+	cp.max_latency	= cpu_to_le16(params->max_latency);
+	cp.cont_num	= cpu_to_le16(params->cont_num);
+	cp.supv_timeout	= cpu_to_le16(params->rate_supv_timeout);
+	cp.min_ce_len	= cpu_to_le16(0x0000);
+	cp.max_ce_len	= cpu_to_le16(0x0000);
+
+	hci_dev_unlock(hdev);
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_CONN_RATE,
+				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
+
+static void hci_le_conn_rate_request_destroy(struct hci_dev *hdev, void *data,
+					     int err)
+{
+	struct hci_conn *conn = data;
+
+	hci_conn_put(conn);
+}
+
+int hci_le_conn_rate_request(struct hci_dev *hdev, struct hci_conn *conn)
+{
+	int err;
+
+	/* Hold a reference to the connection so it cannot be freed while the
+	 * request is pending or running on the cmd_sync worker.
+	 */
+	err = hci_cmd_sync_queue(hdev, hci_le_conn_rate_request_sync,
+				 hci_conn_get(conn),
+				 hci_le_conn_rate_request_destroy);
+	if (err < 0)
+		hci_conn_put(conn);
+
+	return err;
+}
+
 static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
 {
 	struct hci_conn *conn = data;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 58f01fbfcf71..201969a21fdb 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -8160,6 +8160,115 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
 				 NULL, 0);
 }
 
+static int load_conn_subrate(struct sock *sk, struct hci_dev *hdev, void *data,
+			     u16 len)
+{
+	struct mgmt_cp_load_conn_subrate *cp = data;
+	const u16 max_param_count = ((U16_MAX - sizeof(*cp)) /
+				     sizeof(struct mgmt_conn_subrate));
+	u16 param_count, expected_len;
+	int i;
+
+	if (!lmp_le_capable(hdev) || !le_sci_capable(hdev))
+		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_LOAD_CONN_SUBRATE,
+				       MGMT_STATUS_NOT_SUPPORTED);
+
+	param_count = __le16_to_cpu(cp->param_count);
+	if (param_count > max_param_count) {
+		bt_dev_err(hdev, "load_conn_subrate: too big param_count value %u",
+			   param_count);
+		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_LOAD_CONN_SUBRATE,
+				       MGMT_STATUS_INVALID_PARAMS);
+	}
+
+	expected_len = struct_size(cp, params, param_count);
+	if (expected_len != len) {
+		bt_dev_err(hdev, "load_conn_subrate: expected %u bytes, got %u bytes",
+			   expected_len, len);
+		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_LOAD_CONN_SUBRATE,
+				       MGMT_STATUS_INVALID_PARAMS);
+	}
+
+	bt_dev_dbg(hdev, "param_count %u", param_count);
+
+	hci_dev_lock(hdev);
+
+	for (i = 0; i < param_count; i++) {
+		struct mgmt_conn_subrate *param = &cp->params[i];
+		struct hci_conn_params *hci_param;
+		u16 min, max, subrate_min, subrate_max;
+		u16 max_latency, cont_num, supv_timeout;
+		u8 addr_type;
+
+		bt_dev_dbg(hdev, "Adding subrate %pMR (type %u)",
+			   &param->addr.bdaddr, param->addr.type);
+
+		if (param->addr.type == BDADDR_LE_PUBLIC) {
+			addr_type = ADDR_LE_DEV_PUBLIC;
+		} else if (param->addr.type == BDADDR_LE_RANDOM) {
+			addr_type = ADDR_LE_DEV_RANDOM;
+		} else {
+			bt_dev_err(hdev, "ignoring invalid connection subrate parameters");
+			continue;
+		}
+
+		min = le16_to_cpu(param->min_interval);
+		max = le16_to_cpu(param->max_interval);
+		subrate_min = le16_to_cpu(param->subrate_min);
+		subrate_max = le16_to_cpu(param->subrate_max);
+		max_latency = le16_to_cpu(param->max_latency);
+		cont_num = le16_to_cpu(param->cont_num);
+		supv_timeout = le16_to_cpu(param->supv_timeout);
+
+		/* Validate the parameters before storing them. Reject
+		 * logically inconsistent values instead of forwarding them to
+		 * the controller.
+		 */
+		if (min > max || subrate_min > subrate_max ||
+		    subrate_min < 1 || supv_timeout < 1) {
+			bt_dev_err(hdev, "ignoring invalid connection subrate parameters");
+			continue;
+		}
+
+		hci_param = hci_conn_params_add(hdev, &param->addr.bdaddr,
+						addr_type);
+		if (!hci_param) {
+			bt_dev_err(hdev, "failed to add connection parameters");
+			continue;
+		}
+
+		hci_param->rate_min_interval = min;
+		hci_param->rate_max_interval = max;
+		hci_param->subrate_min = subrate_min;
+		hci_param->subrate_max = subrate_max;
+		hci_param->max_latency = max_latency;
+		hci_param->cont_num = cont_num;
+		hci_param->rate_supv_timeout = supv_timeout;
+
+		/* If the device is connected as central check if the
+		 * connection rate parameters need to be updated.
+		 */
+		if (!i && param_count == 1) {
+			struct hci_conn *conn;
+
+			conn = hci_conn_hash_lookup_le(hdev,
+						       &hci_param->addr,
+						       addr_type);
+			if (conn && conn->role == HCI_ROLE_MASTER &&
+			    (conn->le_rate_interval < min ||
+			     conn->le_rate_interval > max ||
+			     conn->le_subrate < subrate_min ||
+			     conn->le_subrate > subrate_max))
+				hci_le_conn_rate_request(hdev, conn);
+		}
+	}
+
+	hci_dev_unlock(hdev);
+
+	return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_SUBRATE, 0,
+				 NULL, 0);
+}
+
 static int set_external_config(struct sock *sk, struct hci_dev *hdev,
 			       void *data, u16 len)
 {
@@ -9577,6 +9686,8 @@ static const struct hci_mgmt_handler mgmt_handlers[] = {
 						HCI_MGMT_VAR_LEN },
 	{ mesh_send_cancel,        MGMT_MESH_SEND_CANCEL_SIZE },
 	{ mgmt_hci_cmd_sync,       MGMT_HCI_CMD_SYNC_SIZE, HCI_MGMT_VAR_LEN },
+	{ load_conn_subrate,       MGMT_LOAD_CONN_SUBRATE_SIZE,
+						HCI_MGMT_VAR_LEN },
 };
 
 void mgmt_index_added(struct hci_dev *hdev)
@@ -10725,6 +10836,23 @@ int mgmt_init(void)
 	return hci_mgmt_chan_register(&chan);
 }
 
+void mgmt_conn_subrate_notify(struct hci_dev *hdev, struct hci_conn *conn,
+			      u8 status)
+{
+	struct mgmt_ev_conn_subrate ev;
+
+	bacpy(&ev.addr.bdaddr, &conn->dst);
+	ev.addr.type = link_to_bdaddr(conn->type, conn->dst_type);
+	ev.status = mgmt_status(status);
+	ev.interval = cpu_to_le16(conn->le_rate_interval);
+	ev.subrate = cpu_to_le16(conn->le_subrate);
+	ev.latency = cpu_to_le16(conn->le_rate_latency);
+	ev.cont_num = cpu_to_le16(conn->le_cont_num);
+	ev.supv_timeout = cpu_to_le16(conn->le_rate_supv_timeout);
+
+	mgmt_event(MGMT_EV_CONN_SUBRATE, hdev, &ev, sizeof(ev), NULL);
+}
+
 void mgmt_exit(void)
 {
 	hci_mgmt_chan_unregister(&chan);
-- 
2.54.0

RE: [v2,1/3] Bluetooth: Add support for Shorter Connection Interval (SCI) feature

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 3436 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1136133

---Test result---

Test Summary:
CheckPatch                    FAIL      3.94 seconds
VerifyFixes                   PASS      0.07 seconds
VerifySignedoff               PASS      0.07 seconds
GitLint                       PASS      0.63 seconds
SubjectPrefix                 PASS      0.20 seconds
BuildKernel                   PASS      27.22 seconds
CheckAllWarning               PASS      29.83 seconds
CheckSparse                   PASS      28.29 seconds
BuildKernel32                 PASS      26.08 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      502.86 seconds
TestRunner_l2cap-tester       PASS      64.25 seconds
TestRunner_iso-tester         PASS      87.98 seconds
TestRunner_bnep-tester        PASS      19.65 seconds
TestRunner_mgmt-tester        FAIL      227.70 seconds
TestRunner_rfcomm-tester      PASS      26.75 seconds
TestRunner_sco-tester         PASS      33.64 seconds
TestRunner_ioctl-tester       PASS      27.17 seconds
TestRunner_mesh-tester        FAIL      26.87 seconds
TestRunner_smp-tester         PASS      23.54 seconds
TestRunner_userchan-tester    PASS      20.04 seconds
TestRunner_6lowpan-tester     PASS      23.07 seconds
IncrementalBuild              PASS      61.52 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2,3/3] Bluetooth: Add MGMT Load Connection Subrate command
WARNING: Prefer using '"%s...", __func__' to using 'load_conn_subrate', this function's name, in a string
#369: FILE: net/bluetooth/mgmt.c:8178:
+		bt_dev_err(hdev, "load_conn_subrate: too big param_count value %u",

WARNING: Prefer using '"%s...", __func__' to using 'load_conn_subrate', this function's name, in a string
#377: FILE: net/bluetooth/mgmt.c:8186:
+		bt_dev_err(hdev, "load_conn_subrate: expected %u bytes, got %u bytes",

total: 0 errors, 2 warnings, 0 checks, 337 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/patch/14716338.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.267 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    2.678 seconds
Mesh - Send cancel - 2                               Timed out    1.988 seconds


https://github.com/bluez/bluetooth-next/pull/505

---
Regards,
Linux Bluetooth