* [PATCH v2 0/2] Add support for the Synaptics BCM4384 Bluetooth controller @ 2026-08-18 1:49 Kaihsin Chung 2026-08-18 1:49 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Kaihsin Chung 2026-08-18 1:49 ` [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support Kaihsin Chung 0 siblings, 2 replies; 7+ messages in thread From: Kaihsin Chung @ 2026-08-18 1:49 UTC (permalink / raw) To: linux-bluetooth Cc: marcel, luiz.dentz, robh, krzk+dt, conor+dt, linusw, devicetree, linux-kernel, Kaihsin Chung The first patch adds the BCM4384 Device Tree compatible string. The second patch adds the controller support to the Broadcom Bluetooth driver Kaihsin Chung (2): dt-bindings: net: bluetooth: add BCM4384 Bluetooth: btbcm: Add Synaptics 4384 chip support .../devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml | 1 + drivers/bluetooth/btbcm.c | 6 +++++- drivers/bluetooth/hci_bcm.c | 1 + 3 files changed, 7 insertions(+), 1 deletion(-) -- 2.43.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 2026-08-18 1:49 [PATCH v2 0/2] Add support for the Synaptics BCM4384 Bluetooth controller Kaihsin Chung @ 2026-08-18 1:49 ` Kaihsin Chung 2026-08-18 3:19 ` Add support for the Synaptics BCM4384 Bluetooth controller bluez.test.bot 2026-08-19 9:44 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Krzysztof Kozlowski 2026-08-18 1:49 ` [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support Kaihsin Chung 1 sibling, 2 replies; 7+ messages in thread From: Kaihsin Chung @ 2026-08-18 1:49 UTC (permalink / raw) To: linux-bluetooth Cc: marcel, luiz.dentz, robh, krzk+dt, conor+dt, linusw, devicetree, linux-kernel, Kaihsin Chung Add the brcm,bcm4384-bt compatible string to support the Synaptics BCM4384 Bluetooth controller. Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com> --- .../devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml index 95501e858e6f..612d21123aaa 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml @@ -31,6 +31,7 @@ properties: - brcm,bcm43540-bt - brcm,bcm4335a0 - brcm,bcm4349-bt + - brcm,bcm4384-bt - cypress,cyw4373a0-bt - infineon,cyw55572-bt -- 2.43.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* RE: Add support for the Synaptics BCM4384 Bluetooth controller 2026-08-18 1:49 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Kaihsin Chung @ 2026-08-18 3:19 ` bluez.test.bot 2026-08-19 9:44 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Krzysztof Kozlowski 1 sibling, 0 replies; 7+ messages in thread From: bluez.test.bot @ 2026-08-18 3:19 UTC (permalink / raw) To: linux-bluetooth, kaihsin.chung [-- Attachment #1: Type: text/plain, Size: 4028 bytes --] This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1147486 ---Test result--- Test Summary: CheckPatch FAIL 1.32 seconds VerifyFixes PASS 0.58 seconds VerifySignedoff PASS 0.07 seconds GitLint PASS 0.42 seconds SubjectPrefix FAIL 0.13 seconds BuildKernel PASS 27.22 seconds CheckAllWarning PASS 30.06 seconds CheckSparse PASS 28.87 seconds BuildKernel32 PASS 26.35 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 500.97 seconds TestRunner_l2cap-tester PASS 64.94 seconds TestRunner_iso-tester PASS 79.01 seconds TestRunner_bnep-tester PASS 19.45 seconds TestRunner_mgmt-tester FAIL 221.21 seconds TestRunner_rfcomm-tester PASS 25.63 seconds TestRunner_sco-tester PASS 33.36 seconds TestRunner_ioctl-tester PASS 27.10 seconds TestRunner_mesh-tester FAIL 25.88 seconds TestRunner_smp-tester PASS 23.38 seconds TestRunner_userchan-tester PASS 19.85 seconds TestRunner_6lowpan-tester PASS 22.94 seconds IncrementalBuild PASS 27.68 seconds Details ############################## Test: CheckPatch - FAIL Desc: Run checkpatch.pl script Output: [v2,1/2] dt-bindings: net: bluetooth: add BCM4384 WARNING: From:/Signed-off-by: email address mismatch: 'From: Kaihsin Chung <kaihsin.chung@synaptics.corp-partner.google.com>' != 'Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com>' total: 0 errors, 1 warnings, 7 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/patch/14754426.patch has style problems, please review. NOTE: Ignored message types: UNKNOWN_COMMIT_ID NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [v2,2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support WARNING: From:/Signed-off-by: email address mismatch: 'From: Kaihsin Chung <kaihsin.chung@synaptics.corp-partner.google.com>' != 'Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com>' total: 0 errors, 1 warnings, 31 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/patch/14754427.patch has style problems, please review. NOTE: Ignored message types: UNKNOWN_COMMIT_ID NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. ############################## Test: SubjectPrefix - FAIL Desc: Check subject contains "Bluetooth" prefix Output: "Bluetooth: " prefix is not specified in the subject ############################## Test: CheckKernelLLVM - SKIP Desc: Build kernel with LLVM + context analysis Output: Clang not found ############################## Test: TestRunner_mgmt-tester - FAIL Desc: Run mgmt-tester with test-runner Output: Total: 501, Passed: 496 (99.0%), Failed: 1, Not Run: 4 Failed Test Cases Read Exp Feature - Success Failed 0.245 seconds ############################## Test: TestRunner_mesh-tester - FAIL Desc: Run mesh-tester with test-runner Output: Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0 Failed Test Cases Mesh - Send cancel - 1 Timed out 2.226 seconds Mesh - Send cancel - 2 Timed out 1.990 seconds https://github.com/bluez/bluetooth-next/pull/603 --- Regards, Linux Bluetooth ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 2026-08-18 1:49 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Kaihsin Chung 2026-08-18 3:19 ` Add support for the Synaptics BCM4384 Bluetooth controller bluez.test.bot @ 2026-08-19 9:44 ` Krzysztof Kozlowski 1 sibling, 0 replies; 7+ messages in thread From: Krzysztof Kozlowski @ 2026-08-19 9:44 UTC (permalink / raw) To: Kaihsin Chung Cc: linux-bluetooth, marcel, luiz.dentz, robh, krzk+dt, conor+dt, linusw, devicetree, linux-kernel, Kaihsin Chung On Tue, Aug 18, 2026 at 09:49:47AM +0800, Kaihsin Chung wrote: > Add the brcm,bcm4384-bt compatible string to support the > Synaptics BCM4384 Bluetooth controller. > > Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com> > --- > .../devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml | 1 + It's another version of this patchset with same mistakes. Please read previous feedback very carefully. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support 2026-08-18 1:49 [PATCH v2 0/2] Add support for the Synaptics BCM4384 Bluetooth controller Kaihsin Chung 2026-08-18 1:49 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Kaihsin Chung @ 2026-08-18 1:49 ` Kaihsin Chung 2026-08-18 6:47 ` Linus Walleij 2026-08-18 7:37 ` Paul Menzel 1 sibling, 2 replies; 7+ messages in thread From: Kaihsin Chung @ 2026-08-18 1:49 UTC (permalink / raw) To: linux-bluetooth Cc: marcel, luiz.dentz, robh, krzk+dt, conor+dt, linusw, devicetree, linux-kernel, Kaihsin Chung Add support for the Synaptics 4384 Bluetooth controller by adding the corresponding chip IDs. Tested on the VIM3 platform. Verified that the controller initializes successfully and that firmware loading and basic Bluetooth operation work as expected. The VIM3 is a Khadas single-board computer that I used as the host platform for testing the BCM4384 Bluetooth controller. Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com> --- drivers/bluetooth/btbcm.c | 6 +++++- drivers/bluetooth/hci_bcm.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 463d59890bef..63c4c788d9c4 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -31,6 +31,7 @@ #define BDADDR_BCM4334B0 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb0, 0x34, 0x43}}) #define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}}) #define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}}) +#define BDADDR_BCM4384B0 (&(bdaddr_t) {{0x93, 0x76, 0x00, 0xb0, 0x84, 0x43}}) #define BCM_FW_NAME_LEN 64 #define BCM_FW_NAME_COUNT_MAX 4 @@ -130,7 +131,8 @@ int btbcm_check_bdaddr(struct hci_dev *hdev) !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) || !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) || !bacmp(&bda->bdaddr, BDADDR_BCM43430A1) || - !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) { + !bacmp(&bda->bdaddr, BDADDR_BCM43341B) || + !bacmp(&bda->bdaddr, BDADDR_BCM4384B0)) { /* Try falling back to BDADDR EFI variable */ if (btbcm_set_bdaddr_from_efi(hdev) != 0) { bt_dev_info(hdev, "BCM: Using default device address (%pMR)", @@ -514,6 +516,8 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { { 0x4106, "BCM4335A0" }, /* 002.001.006 */ { 0x410c, "BCM43430B0" }, /* 002.001.012 */ { 0x2119, "BCM4373A0" }, /* 001.001.025 */ + { 0x2128, "BCM4384A0" }, /* 001.001.040 */ + { 0x4119, "BCM4384B0" }, /* 002.001.025 */ { } }; diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 9a103db7e355..e70b9f3fd968 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -1593,6 +1593,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data }, { .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data }, { .compatible = "brcm,bcm4335a0" }, + { .compatible = "brcm,bcm4384-bt" }, { .compatible = "cypress,cyw4373a0-bt", .data = &cyw4373a0_device_data }, { .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data }, { }, -- 2.43.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support 2026-08-18 1:49 ` [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support Kaihsin Chung @ 2026-08-18 6:47 ` Linus Walleij 2026-08-18 7:37 ` Paul Menzel 1 sibling, 0 replies; 7+ messages in thread From: Linus Walleij @ 2026-08-18 6:47 UTC (permalink / raw) To: Kaihsin Chung Cc: linux-bluetooth, marcel, luiz.dentz, robh, krzk+dt, conor+dt, devicetree, linux-kernel, Kaihsin Chung On Tue, Aug 18, 2026 at 3:49 AM Kaihsin Chung <kaihsin.chung@synaptics.corp-partner.google.com> wrote: > Add support for the Synaptics 4384 Bluetooth controller > by adding the corresponding chip IDs. > > Tested on the VIM3 platform. Verified that the controller initializes > successfully and that firmware loading and basic Bluetooth operation > work as expected. > > The VIM3 is a Khadas single-board computer that I used as the host > platform for testing the BCM4384 Bluetooth controller. > > Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support 2026-08-18 1:49 ` [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support Kaihsin Chung 2026-08-18 6:47 ` Linus Walleij @ 2026-08-18 7:37 ` Paul Menzel 1 sibling, 0 replies; 7+ messages in thread From: Paul Menzel @ 2026-08-18 7:37 UTC (permalink / raw) To: Kaihsin Chung Cc: linux-bluetooth, marcel, luiz.dentz, robh, krzk+dt, conor+dt, linusw, devicetree, linux-kernel, Kaihsin Chung Dear Kaihsin, Thank you for sending v2. Am 18.08.26 um 03:49 schrieb Kaihsin Chung: > Add support for the Synaptics 4384 Bluetooth controller > by adding the corresponding chip IDs. > > Tested on the VIM3 platform. Verified that the controller initializes > successfully and that firmware loading and basic Bluetooth operation > work as expected. > > The VIM3 is a Khadas single-board computer that I used as the host > platform for testing the BCM4384 Bluetooth controller. Both paragraphs could be merged: Tested on the Khades single-board computer VIM3. Verified that the controller initializes successfully and that firmware loading and basic Bluetooth operation work as expected. > Signed-off-by: Kaihsin Chung <kaihsin.chung@synaptics.com> Note, the author field uses a different address. It would be better if they matched I would suggest to use the synaptics.com address. > --- > drivers/bluetooth/btbcm.c | 6 +++++- > drivers/bluetooth/hci_bcm.c | 1 + > 2 files changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c > index 463d59890bef..63c4c788d9c4 100644 > --- a/drivers/bluetooth/btbcm.c > +++ b/drivers/bluetooth/btbcm.c > @@ -31,6 +31,7 @@ > #define BDADDR_BCM4334B0 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb0, 0x34, 0x43}}) > #define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}}) > #define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}}) > +#define BDADDR_BCM4384B0 (&(bdaddr_t) {{0x93, 0x76, 0x00, 0xb0, 0x84, 0x43}}) > > #define BCM_FW_NAME_LEN 64 > #define BCM_FW_NAME_COUNT_MAX 4 > @@ -130,7 +131,8 @@ int btbcm_check_bdaddr(struct hci_dev *hdev) > !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) || > !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) || > !bacmp(&bda->bdaddr, BDADDR_BCM43430A1) || > - !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) { > + !bacmp(&bda->bdaddr, BDADDR_BCM43341B) || > + !bacmp(&bda->bdaddr, BDADDR_BCM4384B0)) { > /* Try falling back to BDADDR EFI variable */ > if (btbcm_set_bdaddr_from_efi(hdev) != 0) { > bt_dev_info(hdev, "BCM: Using default device address (%pMR)", > @@ -514,6 +516,8 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { > { 0x4106, "BCM4335A0" }, /* 002.001.006 */ > { 0x410c, "BCM43430B0" }, /* 002.001.012 */ > { 0x2119, "BCM4373A0" }, /* 001.001.025 */ > + { 0x2128, "BCM4384A0" }, /* 001.001.040 */ What about A0? It’s not added in the hunks above. Please add a comment in the commit message. > + { 0x4119, "BCM4384B0" }, /* 002.001.025 */ > { } > }; > > diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c > index 9a103db7e355..e70b9f3fd968 100644 > --- a/drivers/bluetooth/hci_bcm.c > +++ b/drivers/bluetooth/hci_bcm.c > @@ -1593,6 +1593,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { > { .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data }, > { .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data }, > { .compatible = "brcm,bcm4335a0" }, > + { .compatible = "brcm,bcm4384-bt" }, > { .compatible = "cypress,cyw4373a0-bt", .data = &cyw4373a0_device_data }, > { .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data }, > { }, Kind regards, Paul ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-08-19 9:44 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-08-18 1:49 [PATCH v2 0/2] Add support for the Synaptics BCM4384 Bluetooth controller Kaihsin Chung 2026-08-18 1:49 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Kaihsin Chung 2026-08-18 3:19 ` Add support for the Synaptics BCM4384 Bluetooth controller bluez.test.bot 2026-08-19 9:44 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: add BCM4384 Krzysztof Kozlowski 2026-08-18 1:49 ` [PATCH v2 2/2] Bluetooth: btbcm: Add Synaptics 4384 chip support Kaihsin Chung 2026-08-18 6:47 ` Linus Walleij 2026-08-18 7:37 ` Paul Menzel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox