[PATCH] Bluetooth: btintel_pcie: fix stale cache in set_dxstate fallback check

["Vladimir V. Kondratyev" <vladimirkondratyev2@gmail.com>]

btintel_pcie_set_dxstate() falls back to checking the controller state via
btintel_pcie_in_d3/d0() when the alive interrupt is missed. However, these
helpers read boot_stage_cache, which is only updated by the interrupt
handler. As such, if the interrupt was missed, the cache is stale and the
fallback check always fails, exhausting all retries and returning -EBUSY,
causing suspend to abort.

The fix involves re-reading the hardware register before the fallback state
check, consistent with btintel_pcie_resume().

Fixes: e57362f4911b ("Bluetooth: btintel_pcie: Add support for _suspend() / _resume()")

Signed-off-by: Vladimir V. Kondratyev <vladimirkondratyev2@gmail.com>
Tested-by: Sergey Lebedev <lsa.uz@pm.me>
---
 drivers/bluetooth/btintel_pcie.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c
index fda474406003..7fca8eea6e01 100644
--- a/drivers/bluetooth/btintel_pcie.c
+++ b/drivers/bluetooth/btintel_pcie.c
@@ -2778,9 +2778,13 @@ static int btintel_pcie_set_dxstate(struct btintel_pcie_data *data, u32 dxstate)
 					  BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0);
 
 		/* A hardware bug may cause the alive interrupt to be missed.
-		 * Check if the controller reached the expected state and retry
-		 * the operation only if it hasn't.
+		 * Refresh boot_stage_cache from hardware since it is only
+		 * updated by the interrupt handler, then check if the
+		 * controller reached the expected state and retry the
+		 * operation only if it hasn't.
 		 */
+		data->boot_stage_cache = btintel_pcie_rd_reg32(data,
+							       BTINTEL_PCIE_CSR_BOOT_STAGE_REG);
 		if (dxstate == BTINTEL_PCIE_STATE_D0) {
 			if (btintel_pcie_in_d0(data))
 				return 0;
-- 
2.55.0