* [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
@ 2026-09-02 16:04 Catherine L
2026-09-02 11:07 ` Paul Menzel
2026-09-02 11:53 ` [v1] " bluez.test.bot
0 siblings, 2 replies; 5+ messages in thread
From: Catherine L @ 2026-09-02 16:04 UTC (permalink / raw)
To: marcel, luiz.dentz, linux-bluetooth, linux-kernel
Cc: kiran.k, L, Catherine, L
From: "L, Catherine" <catherine.l@intel.com>
$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
Signed-off-by: L, Catherine <catherine.l@intel.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 03039ceaa77d..a4fdf6549127 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+ /* Otter Peak2, Wildcat Lake */
+ { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 16:04 [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2) Catherine L
@ 2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
2026-09-02 11:53 ` [v1] " bluez.test.bot
1 sibling, 2 replies; 5+ messages in thread
From: Paul Menzel @ 2026-09-02 11:07 UTC (permalink / raw)
To: Catherine L; +Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, kiran.k, L
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
> From: "L, Catherine" <catherine.l@intel.com>
Please use the format without comma: Catherine L.
> $ lsusb
> Bus 003 Device 003: ID 8087:0043 Intel Corp.
>
> $ cat /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=8087 ProdID=0043 Rev= 0.00
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>
> Signed-off-by: L, Catherine <catherine.l@intel.com>
Ditto.
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 03039ceaa77d..a4fdf6549127 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
> + /* Otter Peak2, Wildcat Lake */
> + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below.
> { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Kind regards,
Paul
^ permalink raw reply [flat|nested] 5+ messages in thread* RE: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 11:07 ` Paul Menzel
@ 2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
1 sibling, 0 replies; 5+ messages in thread
From: L, Catherine @ 2026-09-02 13:24 UTC (permalink / raw)
To: Paul Menzel
Cc: marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
K, Kiran, L@web.codeaurora.org
Hi Paul,
Thanks for the comments.
-----Original Message-----
From: Paul Menzel <pmenzel@molgen.mpg.de>
Sent: 02 September 2026 16:37
To: L, Catherine <catherine.l@intel.com>
Cc: marcel@holtmann.org; luiz.dentz@gmail.com; linux-bluetooth@vger.kernel.org; linux-kernel@vger.kernel.org; K, Kiran <kiran.k@intel.com>; L@web.codeaurora.org
Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
> From: "L, Catherine" <catherine.l@intel.com>
Please use the format without comma: Catherine L.
Ack, Will change in v2 patch
> $ lsusb
> Bus 003 Device 003: ID 8087:0043 Intel Corp.
>
> $ cat /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=8087 ProdID=0043 Rev= 0.00
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>
> Signed-off-by: L, Catherine <catherine.l@intel.com>
Ditto.
Ack, Will change in v2 patch
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 03039ceaa77d..a4fdf6549127 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED
> },
> + /* Otter Peak2, Wildcat Lake */
> + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below.
Ack, Will change in v2 patch
> { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Kind regards,
Paul
Regards,
Catherine L
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
@ 2026-09-02 15:17 ` Luiz Augusto von Dentz
1 sibling, 0 replies; 5+ messages in thread
From: Luiz Augusto von Dentz @ 2026-09-02 15:17 UTC (permalink / raw)
To: Paul Menzel
Cc: Catherine L, marcel, linux-bluetooth, linux-kernel, kiran.k, L
Hi Paul,
On Wed, Sep 2, 2026 at 7:07 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Catherine,
>
>
> Thank you for your patch.
>
> Am 02.09.26 um 18:04 schrieb Catherine L:
> > From: "L, Catherine" <catherine.l@intel.com>
>
> Please use the format without comma: Catherine L.
>
> > $ lsusb
> > Bus 003 Device 003: ID 8087:0043 Intel Corp.
> >
> > $ cat /sys/kernel/debug/usb/devices
> > T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> > D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=8087 ProdID=0043 Rev= 0.00
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> >
> > Signed-off-by: L, Catherine <catherine.l@intel.com>
>
> Ditto.
>
> > ---
> > drivers/bluetooth/btusb.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 03039ceaa77d..a4fdf6549127 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> > { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> > { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> > { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
> > + /* Otter Peak2, Wildcat Lake */
> > + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
>
> Please sort and put the comment on the same line as below.
That's not a good idea, we still have the 80-column limit for the
Bluetooth subsystem.
> > { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> > { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> > { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
>
>
> Kind regards,
>
> Paul
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 16:04 [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2) Catherine L
2026-09-02 11:07 ` Paul Menzel
@ 2026-09-02 11:53 ` bluez.test.bot
1 sibling, 0 replies; 5+ messages in thread
From: bluez.test.bot @ 2026-09-02 11:53 UTC (permalink / raw)
To: linux-bluetooth, catherine.l
[-- Attachment #1: Type: text/plain, Size: 1181 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1156048
---Test result---
Test Summary:
CheckPatch PASS 0.74 seconds
VerifyFixes PASS 0.14 seconds
VerifySignedoff PASS 0.14 seconds
GitLint PASS 0.34 seconds
SubjectPrefix PASS 0.13 seconds
BuildKernel PASS 27.58 seconds
CheckAllWarning PASS 30.71 seconds
CheckSparse PASS 29.16 seconds
BuildKernel32 PASS 26.46 seconds
CheckKernelLLVM SKIP 0.00 seconds
TestRunnerSetup PASS 503.41 seconds
IncrementalBuild PASS 26.24 seconds
Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/686
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-09-02 15:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-02 16:04 [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2) Catherine L
2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
2026-09-02 11:53 ` [v1] " bluez.test.bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox