Linux bluetooth development
 help / color / mirror / Atom feed
From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ v2 00/16] Channel Sounding and RAP fixes
Date: Wed, 18 Nov 2026 14:58:28 -0500	[thread overview]
Message-ID: <20261118195846.393710-1-luiz.dentz@gmail.com> (raw)

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This series fixes the Ranging Profile Requester and Reflector setup
and RAS server issues found while running the RAP and RAS PTS tests
(Channel Sounding with a Reflector, peer-created configurations,
Ranging Data subscriptions, per-connection Ranging Counters), plus a
GATT database CCC state leak and a use-after-free in bluetoothctl.

v2:
- gatt-database: clear the cached state of both bearers of a dual-mode
  device when it is removed.
- shared/rap: keep the Ranging Data Ready and Overwritten counters per
  connection instead of resetting the adapter-wide state on detach.
- profiles/ranging: exclude armed Reflector sessions from the Active
  property.
- profiles/ranging: ignore Remote Supported Capabilities of unmapped
  handles, so one link cannot overwrite another's antenna limits.
- profiles/ranging: enter CS_STATE_INIT before the asynchronous
  capability reads, so a peer-created configuration is not rewound.
- unit/test-rap: add tests for the Requester Ranging Data subscriptions,
  the Real-time timeout and the per-connection counters.

Cheng Jiang (15):
  gatt-database: Drop stale device state for removed bonds
  shared/rap: Reset the readable Ranging Counters per connection
  shared/rap: Subscribe on-demand data with the requested transport
  shared/rap: Subscribe to Ranging Data when a measurement starts
  client/cs: Fix use-after-free in stop_measurement_reply
  shared/hci: Look up the connection handle on the right link
  profiles/ranging: Let the Reflector run the CS setup phase
  profiles/ranging: Let StartMeasurement() pick the Initiator for Both
  profiles/ranging: Take the CS role from Config Complete
  profiles/ranging: Act on a CS configuration created by the peer
  profiles/ranging: Keep a peer-driven setup from being rewound
  profiles/ranging: Defer CS Security Enable until the link is encrypted
  profiles/ranging: Choose the CS antenna configuration from both ends
  profiles/ranging: Do not start a procedure after StopMeasurement()
  shared/rap: Start the Real-time timeout when the procedure starts

Luiz Augusto von Dentz (1):
  unit/test-rap: Add tests for Ranging Data subscription and counters

 client/cs.c                        |  40 ++-
 doc/org.bluez.ChannelSounding1.rst |  21 +-
 lib/bluetooth/hci.h                |   1 +
 profiles/ranging/rap.c             |  28 +-
 profiles/ranging/rap_hci.c         | 431 +++++++++++++++++++-----
 src/device.c                       |   3 +
 src/gatt-database.c                |  30 ++
 src/gatt-database.h                |   2 +
 src/shared/hci.c                   |  12 +-
 src/shared/hci.h                   |   2 +-
 src/shared/rap.c                   |  98 ++++--
 src/shared/rap.h                   |   6 +-
 tools/hcitool.c                    |   3 -
 unit/test-rap.c                    | 507 ++++++++++++++++++++++++++---
 14 files changed, 985 insertions(+), 199 deletions(-)

-- 
2.56.0


             reply	other threads:[~2026-11-18 19:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18 19:58 Luiz Augusto von Dentz [this message]
2026-11-18 19:58 ` [PATCH BlueZ v2 01/16] gatt-database: Drop stale device state for removed bonds Luiz Augusto von Dentz
2026-11-19  1:57   ` Channel Sounding and RAP fixes bluez.test.bot
2026-11-18 19:58 ` [PATCH BlueZ v2 02/16] shared/rap: Reset the readable Ranging Counters per connection Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 03/16] shared/rap: Subscribe on-demand data with the requested transport Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 04/16] shared/rap: Subscribe to Ranging Data when a measurement starts Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 05/16] client/cs: Fix use-after-free in stop_measurement_reply Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 06/16] shared/hci: Look up the connection handle on the right link Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 07/16] profiles/ranging: Let the Reflector run the CS setup phase Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 08/16] profiles/ranging: Let StartMeasurement() pick the Initiator for Both Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 09/16] profiles/ranging: Take the CS role from Config Complete Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 10/16] profiles/ranging: Act on a CS configuration created by the peer Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 11/16] profiles/ranging: Keep a peer-driven setup from being rewound Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 12/16] profiles/ranging: Defer CS Security Enable until the link is encrypted Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 13/16] profiles/ranging: Choose the CS antenna configuration from both ends Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 14/16] profiles/ranging: Do not start a procedure after StopMeasurement() Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 15/16] shared/rap: Start the Real-time timeout when the procedure starts Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 16/16] unit/test-rap: Add tests for Ranging Data subscription and counters Luiz Augusto von Dentz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118195846.393710-1-luiz.dentz@gmail.com \
    --to=luiz.dentz@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox