From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ v2 09/16] profiles/ranging: Take the CS role from Config Complete
Date: Wed, 18 Nov 2026 14:58:37 -0500 [thread overview]
Message-ID: <20261118195846.393710-10-luiz.dentz@gmail.com> (raw)
In-Reply-To: <20261118195846.393710-1-luiz.dentz@gmail.com>
From: Cheng Jiang <cheng.jiang@oss.qualcomm.com>
The LE CS Config Complete handler stored the CS role it reports in
cs_opt.role, overwriting the Role_Enable value set by StartMeasurement().
StartMeasurement() seeds its settings from that field, so a second call
without a role key sent Set Default Settings with the negotiated role
instead: 0x00 for an Initiator, which is not a valid Role_Enable, and
0x01, Initiator only, for a Reflector.
Keep the negotiated role in its own field, known only once Config
Complete has arrived, and report Role_Enable back to StartMeasurement().
With the Reflector now running the setup phase, StopMeasurement() can
also be reached on a Reflector whose procedure is running. Only the
Initiator enables a procedure, so do not send Procedure Enable from a
Reflector to stop it.
Assisted-by: Claude:claude-opus-5-5
---
profiles/ranging/rap_hci.c | 29 ++++++++++++++++++++---------
src/shared/rap.h | 1 -
2 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/profiles/ranging/rap_hci.c b/profiles/ranging/rap_hci.c
index f23e89cfeb3c..ef01e60c559a 100644
--- a/profiles/ranging/rap_hci.c
+++ b/profiles/ranging/rap_hci.c
@@ -75,6 +75,13 @@ struct cs_state_machine {
bool procedure_active;
struct bt_rap_hci_cs_options cs_opt; /* Per-instance CS options */
uint8_t role_enable; /* Role value for HCI commands (1, 2, or 3) */
+ /* Negotiated CS role for this config (CS_INITIATOR/CS_REFLECTOR), taken
+ * from LE CS Config Complete. Unknown until that event arrives, which
+ * is why it is kept apart from role_enable: the latter is the bitmask
+ * of roles the host permits, not the role actually in use.
+ */
+ uint8_t cs_role;
+ bool cs_role_known;
struct queue *conn_mappings; /* Per-instance connection mappings */
uint16_t active_conn_handle; /* current measurement handle */
struct timespec last_chan_class_time; /* For 1-second rate limit */
@@ -129,7 +136,6 @@ bool bt_rap_set_default_settings_params(void *hci_sm,
return false;
sm->role_enable = settings->role;
- sm->cs_opt.role = settings->role;
sm->cs_opt.cs_sync_ant_sel = settings->cs_sync_ant_sel;
sm->cs_opt.max_tx_power = settings->max_tx_power;
return true;
@@ -167,7 +173,7 @@ bool bt_rap_get_default_settings_params(void *hci_sm,
if (!sm || !settings)
return false;
- settings->role = sm->cs_opt.role;
+ settings->role = sm->role_enable;
settings->cs_sync_ant_sel = sm->cs_opt.cs_sync_ant_sel;
settings->max_tx_power = sm->cs_opt.max_tx_power;
return true;
@@ -277,7 +283,7 @@ static void cs_state_machine_init(struct cs_state_machine *sm,
/* Store role_enable for HCI commands (1, 2, or 3 from config) */
sm->role_enable = role;
- sm->cs_opt.role = role;
+ sm->cs_role_known = false;
sm->cs_opt.cs_sync_ant_sel = cs_sync_ant_sel;
sm->cs_opt.max_tx_power = max_tx_power;
sm->cs_opt.rtt_type = 0;
@@ -956,7 +962,8 @@ static void rap_cs_config_cmplt_evt(const void *data, uint8_t size,
return;
}
- sm->cs_opt.role = rap_ev.role;
+ sm->cs_role = rap_ev.role;
+ sm->cs_role_known = true;
sm->cs_opt.rtt_type = rap_ev.rtt_type;
DBG("config_id=%u, action=%u, ",
@@ -1042,7 +1049,7 @@ static void rap_cs_sec_enable_cmplt_evt(const void *data, uint8_t size,
cs_set_state(sm, CS_STATE_WAIT_PROC_CMPLT);
/* Check if role is initiator */
- if (sm->cs_opt.role == CS_INITIATOR) {
+ if (sm->cs_role_known && sm->cs_role == CS_INITIATOR) {
DBG("Initiator role: Sending CS Set Procedure Params");
if (!rap_send_hci_cs_set_procedure_parameters(
sm, handle)) {
@@ -1516,7 +1523,7 @@ static void rap_cs_subevt_result_evt(const void *data, uint8_t size,
return;
}
- cs_role = sm->cs_opt.role;
+ cs_role = sm->cs_role;
cs_rtt_type = sm->cs_opt.rtt_type;
max_paths = MIN((num_ant_paths + 1), CS_MAX_ANT_PATHS);
steps = MIN(num_steps_reported, CS_MAX_STEPS);
@@ -1608,7 +1615,7 @@ static void rap_cs_subevt_result_cont_evt(const void *data, uint8_t size,
return;
}
- cs_role = sm->cs_opt.role;
+ cs_role = sm->cs_role;
cs_rtt_type = sm->cs_opt.rtt_type;
max_paths = MIN((num_ant_paths + 1), CS_MAX_ANT_PATHS);
steps = MIN(num_steps_reported, CS_MAX_STEPS);
@@ -1832,9 +1839,12 @@ bool bt_rap_stop_measurement(void *hci_sm)
* there is nothing to disable, and the Controller answers Procedure
* Enable with Invalid HCI Command Parameters. A procedure that is
* being enabled has not reported yet, so still disable that one.
+ * Only the Initiator enables a procedure, so the same holds for a
+ * Reflector once the Initiator's procedure is running.
*/
- if (!sm->procedure_active &&
- cs_get_current_state(sm) != CS_STATE_WAIT_PROC_CMPLT) {
+ if ((!sm->procedure_active &&
+ cs_get_current_state(sm) != CS_STATE_WAIT_PROC_CMPLT) ||
+ !sm->cs_role_known || sm->cs_role != CS_INITIATOR) {
DBG("No local CS procedure active, nothing to disable");
return true;
}
@@ -1891,6 +1901,7 @@ void bt_rap_clear_conn_handle(void *hci_sm, uint16_t handle)
DBG("Clearing connection mapping: handle=0x%04X", handle);
remove_conn_mapping(sm, handle);
sm->procedure_active = false;
+ sm->cs_role_known = false;
sm->current_state = CS_STATE_UNSPECIFIED;
}
diff --git a/src/shared/rap.h b/src/shared/rap.h
index 7ee51143c0ef..7ff5de227d70 100644
--- a/src/shared/rap.h
+++ b/src/shared/rap.h
@@ -19,7 +19,6 @@ struct bt_att;
/* Channel Sounding Events */
struct bt_rap_hci_cs_options {
- uint8_t role;
uint8_t cs_sync_ant_sel;
int8_t max_tx_power;
int rtt_type;
--
2.56.0
next prev parent reply other threads:[~2026-11-18 19:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 19:58 [PATCH BlueZ v2 00/16] Channel Sounding and RAP fixes Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 01/16] gatt-database: Drop stale device state for removed bonds Luiz Augusto von Dentz
2026-11-19 1:57 ` Channel Sounding and RAP fixes bluez.test.bot
2026-11-18 19:58 ` [PATCH BlueZ v2 02/16] shared/rap: Reset the readable Ranging Counters per connection Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 03/16] shared/rap: Subscribe on-demand data with the requested transport Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 04/16] shared/rap: Subscribe to Ranging Data when a measurement starts Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 05/16] client/cs: Fix use-after-free in stop_measurement_reply Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 06/16] shared/hci: Look up the connection handle on the right link Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 07/16] profiles/ranging: Let the Reflector run the CS setup phase Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 08/16] profiles/ranging: Let StartMeasurement() pick the Initiator for Both Luiz Augusto von Dentz
2026-11-18 19:58 ` Luiz Augusto von Dentz [this message]
2026-11-18 19:58 ` [PATCH BlueZ v2 10/16] profiles/ranging: Act on a CS configuration created by the peer Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 11/16] profiles/ranging: Keep a peer-driven setup from being rewound Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 12/16] profiles/ranging: Defer CS Security Enable until the link is encrypted Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 13/16] profiles/ranging: Choose the CS antenna configuration from both ends Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 14/16] profiles/ranging: Do not start a procedure after StopMeasurement() Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 15/16] shared/rap: Start the Real-time timeout when the procedure starts Luiz Augusto von Dentz
2026-11-18 19:58 ` [PATCH BlueZ v2 16/16] unit/test-rap: Add tests for Ranging Data subscription and counters Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118195846.393710-10-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox