From: attaboyu <attaboyu@163.com>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] CSR bluecore initial problem
Date: Fri, 23 May 2008 16:07:14 +0800 (CST) [thread overview]
Message-ID: <20844183.487421211530034467.JavaMail.coremail@bj163app76.163.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 879 bytes --]
hi all
I got a problem while init the csr bluecore4 chip, my toolchain: bluez-3.12, dbus-1.0.2,kernel-2.6.10
#dbus-daemon --system
#hciattach ttyS0 bcsp
#hcid -f /opt/bluez/etc/bluetooth/hcid.conf
#hciconfig
hci0: Type: UART
BD Address: 00:02:5B:00:A5:A5 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1128 acl:0 sco:0 events:23 errors:0
TX bytes:706 acl:0 sco:0 commands:26 errors:0
above is always ok.
but csr chip need to set pskeys and warmreset,so I run bccmd
#bccmd warmreset
#hcitool scan
Scanning
Timeout...
This problem around me for a few days, I cant figure out why the csr chip doesnt work after warmreset.UART0 connect to csr chip, so I choose bcsp config in kernel and choose hci interface(here i am not sure about choosing hci or bcsp while run bccmd?), am i right?
--
Best Regards
------------
Tony
[-- Attachment #1.2: Type: text/html, Size: 1443 bytes --]
[-- Attachment #2: Type: text/plain, Size: 228 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2008-05-23 8:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-23 8:07 attaboyu [this message]
2008-05-23 8:24 ` [Bluez-users] CSR bluecore initial problem attaboyu
2008-05-24 11:04 ` Peter Wurmsdobler
2008-05-26 7:34 ` attaboyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20844183.487421211530034467.JavaMail.coremail@bj163app76.163.com \
--to=attaboyu@163.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox