Re: [Bluez-users] CSR bluecore initial problem

[attaboyu@163.com]

[-- Attachment #1.1: Type: text/plain, Size: 930 bytes --]

Thanks indeed, it works!

在2008-05-24，"Peter Wurmsdobler" <peter@wurmsdobler.org> 写道：
>
>
>Hello,
>
>a few months back I encountered a similar problem. hciattach did not 
>(and still does not) always succeed, and bccmd seems to have a problem 
>using the BlueCore serial protocol (bcsp), possibly a race condition. 
>That's why I have to use:
>
>      /usr/sbin/hciattach /dev/ttymxc2 bcsp 57600 flow
>      /usr/sbin/hciconfig hci0 up
>      /usr/sbin/bccmd -t hci psload -r /usr/etc/bluetooth/apm6628BT-UART.psr
>      killall hciattach
>      /usr/sbin/hciattach /dev/ttymxc2 bcsp 115200 flow
>      /usr/sbin/hciconfig hci0 up
>
>Notice the bccmd -t hci, so you have to attach first using bcsp, then 
>use bccmd with this hci in order to download the psr file (which will 
>reset the BlueCore), then kill the hci and re-attach.
>
>Hope this helps,
>peter
>
>
> 
>
>');
>	}
>//-->
>
>

[-- Attachment #1.2: Type: text/html, Size: 1408 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users