[Bluez-users] Pretec and Ambicom BT2000E driver

[Bluez-users] Pretec and Ambicom BT2000E driver

[Pavel Ruzicka]

Hello,

yesterday somebody talks about BT2000E CF card.
I have Pretec BT2000E CF card.
I found new version of alternative driver which probably fix resume problems 
and 2.6 kernel compiling.
I found changelog here:
http://www.iral.com/~albertr/linux/bt2000e/ChangeLog

Best regards,

Pavel Ruzicka


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Marcel Holtmann]

Hi Pavel,

> yesterday somebody talks about BT2000E CF card.
> I have Pretec BT2000E CF card.
> I found new version of alternative driver which probably fix resume problems 
> and 2.6 kernel compiling.

I know that driver and I really thought of including it, but the best
way is to make it working through serial_cs and hci_uart/hciattach. Once
this is solved every card with a 16C950 UART will work and not only the
two with an Ericsson chip on it.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Daniel Jimenez]

> Hi Pavel,
>
> I know that driver and I really thought of including it, but the best
> way is to make it working through serial_cs and hci_uart/hciattach.
> Once this is solved every card with a 16C950 UART will work and not
> only the two with an Ericsson chip on it.
>

My Ambicom card is an ericsson chipset and I can't seem to get it to work. :(

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Pavel Ruzicka]

Hello,

> I know that driver and I really thought of including it, but the best
> way is to make it working through serial_cs and hci_uart/hciattach. Once
> this is solved every card with a 16C950 UART will work and not only the
> two with an Ericsson chip on it.

Today I make some experiments with it.
I have Zaurus SL-C860 with CackoRom kernel 2.4.18...

I edit configuration. After inserting BT2000E CF card is loaded serial_cs
kernel module.
DMESG: ttyS03 at port 0xf60002f8 (irq = 39) is a 16C950/954

# hciattach 10 ttyS3 ericsson 115200
# hciconfig hci0 up
Can't init device hci0. Connection timed out(110)

I've tried several combination with hciattach command with speed from 9600 to 
460800, flow enabled/disabled but without success.

Do you have some idea?

Do you know right parameters for hciattach?

There are some more useful informations:
# cat /proc/tty/driver/serial
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16C950/954 port:F60002F8 irq:39 baud:115200 tx:139 rx:21 fe:6 brk:11 
RTS|CTS|DTR|DSR|CD|RI
1: uart:unknown port:0 irq:0
2: uart:unknown port:0 irq:0
3: uart:unknown port:0 irq:0

# cat /proc/tty/drivers
serial_cpu           /dev/cua        5   64-66 serial:callout
serial_cpu           /dev/ttyS       4   64-66 serial
serial               /dev/cua        5   67-70 serial:callout
serial               /dev/ttyS       4   67-70 serial

# ls -l /dev/ttyS3
crw-------    1 zaurus   root       4,  67 Apr 10 21:58 /dev/ttyS3

I have few more questions.
In dmesg I see: ttyS03... Why not ttyS3?

When I make"rmmod serial_cs"
I see in dmesg this: tty03 unloaded.
Why tty03 and not ttyS3?

I'am a little confused ;-)

This cards works now with bt2000e_cs.o but sometimes my Zaurus freezes when 
removing card...
 
> Regards
> Marcel

Best regards,

Pavel Ruzicka

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Daniel Jimenez]

Pavel Ruzicka wrote:
> Hello,
> 

> This cards works now with bt2000e_cs.o but sometimes my Zaurus freezes when 
> removing card...
> 
> Best regards,
> 
> Pavel Ruzicka
> 

What kernel does it work on? I'm trying to figure out HOW to compile it!

-- 
Daniel Jimenez <djimenez[at]pobox[dot]com>



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Pavel Ruzicka]

Hello,

> > This cards works now with bt2000e_cs.o but sometimes my Zaurus freezes
> > when removing card...
>
> What kernel does it work on? I'm trying to figure out HOW to compile it!

I use this card on Sharp Zaurus SL-C860, which is ARM architecture.
Kernel 2.4.18-rmk7-pxa3-embedix. There are not possible to use newer
kernel.
I use precompiled driver.
I don't know, how to compile driver. Maybe write to kernel tree and edit 
Makefile /usr/src/linux/drivers/bluetooth.
But I'am not kernel expert.

Best regards,

Pavel Ruzicka


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Marcel Holtmann]

Hi Gene,

> Marcel, is anyone making any progress toward "make it working through
> serial_cs and hci_uart/hciattach"?

I don't got any progress so far and from a first code review I also
can't take the bt2000e driver into the kernel, because it would oops.

> I have some of these and would like them to work.

Go ahead and try. Every patch to make this working is welcome.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Pretec and Ambicom BT2000E driver

[Daniel Jimenez]

> Hello,
>
> yesterday somebody talks about BT2000E CF card.
> I have Pretec BT2000E CF card.
> I found new version of alternative driver which probably fix resume
> problems  and 2.6 kernel compiling.
> I found changelog here:
> http://www.iral.com/~albertr/linux/bt2000e/ChangeLog
>
> Best regards,
>
> Pavel Ruzicka
>

Were you able to get this to work in 2.6? I can't seem to find out how to
compile it.





-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users