* [Bluez-users] rfcommX and ppp
@ 2004-10-05 13:05 Rafael Vidal Aroca
2004-10-05 15:57 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Rafael Vidal Aroca @ 2004-10-05 13:05 UTC (permalink / raw)
To: bluez-users
Hi,
i set up a Linux box as a gateway for pdas to access internet. The
first device that connects to the LAN service gets rfcomm0 and have
internet access!
The other devices get rfcomm1, rfcomm2, rfcomm3.....all ok up to now.
The problem is that none of then estabilishes a ppp connection. What
could it be?
[]s Rafael.
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] rfcommX and ppp
2004-10-05 13:05 [Bluez-users] rfcommX and ppp Rafael Vidal Aroca
@ 2004-10-05 15:57 ` Marcel Holtmann
2004-10-05 17:23 ` Rafael Vidal Aroca
0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-05 15:57 UTC (permalink / raw)
To: Rafael Vidal Aroca; +Cc: BlueZ Mailing List
Hi Rafael,
> i set up a Linux box as a gateway for pdas to access internet. The
> first device that connects to the LAN service gets rfcomm0 and have
> internet access!
>
> The other devices get rfcomm1, rfcomm2, rfcomm3.....all ok up to now.
>
> The problem is that none of then estabilishes a ppp connection. What
> could it be?
I have no idea. Tell us more about your setup. Do you use dund?
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] rfcommX and ppp
2004-10-05 15:57 ` Marcel Holtmann
@ 2004-10-05 17:23 ` Rafael Vidal Aroca
2004-10-06 9:44 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Rafael Vidal Aroca @ 2004-10-05 17:23 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
Well, everything is fine, but my ppp is configured to give a
unique ip. You can check this from my peer file /etc/ppp/peers/dun that
follows:
# do not require auth
noauth
# do not use modem control lines we aren't using a real serial line
local
# do not determinate local ip from hostname
noipdefault
# usefull ARP proxing
proxyarp
# do not enable default route
nodefaultroute
# do not use ipx
noipx
# set disconnect timeout
idle 0
# local ip : remote ip
10.0.0.1:10.0.0.2
# dns
ms-dns 10.0.0.1
# netmask
netmask 255.255.255.0
Note the line: 10.0.0.1:10.0.0.2
Can i change this to multiple ips? Because the problem is exactly
this: all devices in the same ip...
[]s Rafael.
Marcel Holtmann wrote:
>Hi Rafael,
>
>
>
>> i set up a Linux box as a gateway for pdas to access internet. The
>>first device that connects to the LAN service gets rfcomm0 and have
>>internet access!
>>
>> The other devices get rfcomm1, rfcomm2, rfcomm3.....all ok up to now.
>>
>> The problem is that none of then estabilishes a ppp connection. What
>>could it be?
>>
>>
>
>I have no idea. Tell us more about your setup. Do you use dund?
>
>Regards
>
>Marcel
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] rfcommX and ppp
2004-10-05 17:23 ` Rafael Vidal Aroca
@ 2004-10-06 9:44 ` Marcel Holtmann
2004-10-09 12:36 ` O Plameras
0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-06 9:44 UTC (permalink / raw)
To: Rafael Vidal Aroca; +Cc: BlueZ Mailing List
Hi Rafael,
> Well, everything is fine, but my ppp is configured to give a
> unique ip. You can check this from my peer file /etc/ppp/peers/dun that
> follows:
>
> # do not require auth
> noauth
>
> # do not use modem control lines we aren't using a real serial line
> local
>
> # do not determinate local ip from hostname
> noipdefault
>
> # usefull ARP proxing
> proxyarp
>
> # do not enable default route
> nodefaultroute
>
> # do not use ipx
> noipx
>
> # set disconnect timeout
> idle 0
>
> # local ip : remote ip
> 10.0.0.1:10.0.0.2
>
> # dns
> ms-dns 10.0.0.1
>
> # netmask
> netmask 255.255.255.0
>
>
> Note the line: 10.0.0.1:10.0.0.2
>
> Can i change this to multiple ips? Because the problem is exactly
> this: all devices in the same ip...
try to use 10.0.0.1: or other way around. Or you can define multiple
options.rfcommX files in /etc/ppp/ and use a bridge. There are some ways
to get this working.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: rfcommX and ppp
2004-10-06 9:44 ` Marcel Holtmann
@ 2004-10-09 12:36 ` O Plameras
2004-10-09 13:51 ` [Bluez-users] " Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: O Plameras @ 2004-10-09 12:36 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
Marcel Holtmann wrote:
>
> try to use 10.0.0.1: or other way around. Or you can define multiple
> options.rfcommX files in /etc/ppp/ and use a bridge. There are some ways
> to get this working.
>
I learned from PPP lists that ppp0 interface bridging is not supported
nor is their a patch under 2.6.x or pppd.
When I do this,
brctl addif br0 ppp0
it returns,
br_add_interface: Invalid argument
Nobody is doing work on these at the moment is my understanding.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Bluez-users] Re: rfcommX and ppp
2004-10-09 12:36 ` O Plameras
@ 2004-10-09 13:51 ` Marcel Holtmann
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-09 13:51 UTC (permalink / raw)
To: O Plameras; +Cc: BlueZ Mailing List
Hi,
> > try to use 10.0.0.1: or other way around. Or you can define multiple
> > options.rfcommX files in /etc/ppp/ and use a bridge. There are some ways
> > to get this working.
>
> I learned from PPP lists that ppp0 interface bridging is not supported
> nor is their a patch under 2.6.x or pppd.
>
> When I do this,
> brctl addif br0 ppp0
>
> it returns,
> br_add_interface: Invalid argument
>
> Nobody is doing work on these at the moment is my understanding.
this is a question for the bridge people. Using PPP over RFCOMM is
deprecated by the Bluetooth SIG and using PAN is much more straight
forward how things should be.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-10-09 13:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-05 13:05 [Bluez-users] rfcommX and ppp Rafael Vidal Aroca
2004-10-05 15:57 ` Marcel Holtmann
2004-10-05 17:23 ` Rafael Vidal Aroca
2004-10-06 9:44 ` Marcel Holtmann
2004-10-09 12:36 ` O Plameras
2004-10-09 13:51 ` [Bluez-users] " Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox