Gatt Thermometer Server Support

Gatt Thermometer Server Support

[ajay.kv]

Hi,
As i am experimenting the BlueZ BLE features. I have some query. I am
using 2 Linux Ubuntu 12.04 Desktop with linux-3.10 kernel and Bluez-5.7
configured with #./configure --enable-experimental

Server_System:
     Enabled ThermometerManager->RegisterWatcher (d-feet
application).
     #hciconfig 0 leadv

Client_System:
     #gatttool -I
     [                 ][LE]>
     [00:02:72:D6:97:79][LE]> connect 00:02:72:D6:97:79
     Attempting to connect to 00:02:72:D6:97:79
     Connection successful

     [00:02:72:D6:97:79][LE]> primary
     attr handle: 0x0001, end grp handle: 0x0008 uuid:
00001800-0000-1000-8000-00805f9b34fb
     attr handle: 0x0009, end grp handle: 0x000b uuid:
00001803-0000-1000-8000-00805f9b34fb
     attr handle: 0x000c, end grp handle: 0x000f uuid:
00001804-0000-1000-8000-00805f9b34fb
     attr handle: 0x0010, end grp handle: 0x0010 uuid:
00001801-0000-1000-8000-00805f9b34fb
     attr handle: 0x0011, end grp handle: 0x0013 uuid:
00001802-0000-1000-8000-00805f9b34fb
     attr handle: 0x0014, end grp handle: 0x0019 uuid:
00001805-0000-1000-8000-00805f9b34fb
     attr handle: 0x001a, end grp handle: 0x001e uuid:
00001806-0000-1000-8000-00805f9b34fb
     attr handle: 0x001f, end grp handle: 0x0027 uuid:
0000180e-0000-1000-8000-00805f9b34fb
     attr handle: 0x0028, end grp handle: 0x0034 uuid:
00001811-0000-1000-8000-00805f9b34fb

    Here we could not find the UUID for Thermometer(1809) and heartrate ,
which we are interested to debug more.

Query:
How to set the dummy temperature or heartrate values in the server and
to get them in the Client.?


Thanks in Advance,
Ajay K V

Re: Gatt Thermometer Server Support

[Anderson Lizardo]

Hi AJay,

On Thu, Aug 8, 2013 at 8:42 AM,  <ajay.kv@globaledgesoft.com> wrote:
>     Here we could not find the UUID for Thermometer(1809) and heartrate ,
> which we are interested to debug more.
>
> Query:
> How to set the dummy temperature or heartrate values in the server and
> to get them in the Client.?

Unfortunately, the Thermometer  role (i.e. "Server") is not supported
in BlueZ. You can only connect and read measurements from other
thermometers. Same applies to Heart Rate Profile.

Best Regards,
-- 
Anderson Lizardo
Instituto Nokia de Tecnologia - INdT
Manaus - Brazil