From: Dave Givens <dave.givens@phaldor.co.uk>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Bluetooth Printing (Belkin Print Server)
Date: Mon, 22 Nov 2004 15:41:17 +0000 [thread overview]
Message-ID: <41A2089D.5030100@phaldor.co.uk> (raw)
[-- Attachment #1: Type: text/plain, Size: 5237 bytes --]
Marcel et al,
I have taken Marcels advice and moved to SUSE 9.2 after trying
Debian on the way. I could not get Debian to work with SATA and so it
was a non starter for this system. SUSE works a treat with SATA,
wireless LAN card and everything but my bluetooth print server. I cannot
find any services for this device, my phone shows up fine as does a
windows bluetooth enabled machine. I have included results from some
commands, please let me know if there are any others I should run. Any
help would be greatly appreciated as I have very little hair left.
admin@Gimli:~> hcitool inq
Inquiring ...
00:0F:DE:1C:2A:59 clock offset: 0x2893 class: 0x520204
00:09:DD:10:39:03 clock offset: 0x7eae class: 0x020104
00:02:72:40:80:A3 clock offset: 0x2151 class: 0x040680
admin@Gimli:~> hcitool inq
Scanning ...
00:0F:DE:1C:2A:59 dave
00:09:DD:10:39:03 DRAGON
00:02:72:40:80:A3 BELKIN_PRT_4080A3
admin@Gimli:~> hcitool info 00:02:72:40:80:A3
Requesting information ...
BD Address: 00:02:72:40:80:A3
Device Name: BELKIN_PRT_4080A3
LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO>
admin@Gimli:~> hcidump -x
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
A3 80 40 72 02 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 05 04
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 A3 80 40 72 02 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
A3 80 40 72 02 00 01
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0051 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0051 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0051 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0051 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x1002 (PubBrwsGrp)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 15
L2CAP(d): cid 0x0040 len 11 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6
cnt 0x3
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0051 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0051 scid 0x0040
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0052 scid 0x0041 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0052 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0052 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0052 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x0100 (L2CAP)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 17
L2CAP(d): cid 0x0041 len 13 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x8
cnt 0x3
cont 02 00 00
..... (etc etc etc) ....
Dave Givens
[-- Attachment #2: Type: text/html, Size: 7949 bytes --]
next reply other threads:[~2004-11-22 15:41 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-22 15:41 Dave Givens [this message]
2004-11-22 16:09 ` [Bluez-users] Bluetooth Printing (Belkin Print Server) Marcel Holtmann
2004-11-22 17:05 ` Dave Givens
2004-11-22 17:16 ` Dave Givens
2004-11-23 9:16 ` Stefan Behlert
2004-11-23 9:40 ` Marcel Holtmann
2004-11-23 15:49 ` Dave Givens
2004-11-23 16:10 ` Marcel Holtmann
2004-11-23 16:21 ` Dave Givens
2004-11-23 16:36 ` Marcel Holtmann
2004-11-23 17:20 ` Dave Givens
2004-11-23 17:26 ` Marcel Holtmann
2004-11-23 22:28 ` Dave Givens
2004-11-24 6:06 ` Marcel Holtmann
2004-11-23 16:11 ` Stefan Behlert
2004-11-23 18:57 ` Dave Givens
2004-11-24 10:18 ` Stefan Behlert
2004-11-25 1:08 ` Dave Givens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41A2089D.5030100@phaldor.co.uk \
--to=dave.givens@phaldor.co.uk \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox