From: administrator tootai <admin@tootai.net>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Re: Connection issue with headset
Date: Mon, 31 Jan 2005 15:57:08 +0100 [thread overview]
Message-ID: <41FE4744.5010804@tootai.net> (raw)
In-Reply-To: <ctdn6n$sqs$1@sea.gmane.org>
Does really nobody have an idea on what is wrong here?
Thanks for any hint.
Daniel.
Sebastian Roth a =E9crit :
> Hi Daniel,
>
>> nomade:/home/dh# btsco 00:0b:2e:06:01:2e
>> Device is 1:0
>> Voice setting: 0x0060
>> RFCOMM channel 6 connected
>
> You have to press the headset button now!
I check further and still I can't get it work. If I do a hcitool scan no
device is found. But the info command is working:
nomade:/etc/bluetooth# hcitool info 00:0b:2e:06:01:2e
Requesting information ...
BD Address: 00:0b:2e:06:01:2e
Device Name: BT1000
LMP Version: 1.1 (0x1) LMP Subversion: 0x405
Manufacturer: Transilica, Inc. (24)
Features: 0xff 0xf9 0x31 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offs=
et>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <SCO link> <HV2 packets> <HV3 packets>
<u-law log> <A-law log> <CVSD>
Here is a hcidump -x when launching btsco with the given channel:
nomade:/home/dh#btsco 00:0b:2e:06:01:2e 1
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
HCIDump - HCI packet analyzer ver 1.12
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
01 25 0C 00 60 00
< HCI Command: Create Connection (0x01|0x0005) plen 13
2E 01 06 2E 0B 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 05 04
> HCI Event: Link Key Request (0x17) plen 6
2E 01 06 2E 0B 00
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
2E 01 06 2E 0B 00 98 0F 70 E7 AD EE 4B 1A 93 1C BA 18 77 0C
19 00
> HCI Event: Command Complete (0x0e) plen 10
01 0B 04 00 2E 01 06 2E 0B 00
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 2E 01 06 2E 0B 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 317
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 312 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 1 ack_timer 0
frame_size 312 max_retrans 0 credits 7
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
29 00 13
> HCI Event: Command Status (0x0f) plen 4
00 01 06 04
> HCI Event: Disconn Complete (0x05) plen 4
00 29 00 16
And here the output from snd-bt-sco
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: playback_trigger 1
snd-bt-sco: setting playback to bspcm
snd-bt-sco: playback_trigger 0
snd-bt-sco: setting playback to NULL
Pairing is done, so what could be the problem?
I would really appreciate any help to debug this problem.
Thanks
--=20
Daniel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-01-31 14:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-28 9:32 [Bluez-users] Connection issue with headset administrator tootai
2005-01-28 15:53 ` [Bluez-users] " Sebastian Roth
2005-01-29 16:39 ` daniel huhardeaux
2005-01-29 16:43 ` administrator tootai
2005-01-29 17:29 ` Stefan Bellon
2005-01-30 3:13 ` Brad Midgley
2005-01-30 19:01 ` administrator tootai
2005-01-31 14:57 ` administrator tootai [this message]
2005-01-31 14:58 ` Marcel Holtmann
2005-01-31 15:30 ` administrator tootai
2005-01-31 15:55 ` Marcel Holtmann
2005-01-31 18:20 ` administrator tootai
2005-02-01 16:37 ` Sebastian Roth
2005-02-02 13:20 ` administrator tootai
2005-02-02 16:21 ` Sebastian Roth
2005-02-02 16:55 ` administrator tootai
2005-02-03 14:13 ` Sebastian Roth
2005-02-03 21:39 ` administrator tootai
2005-02-04 7:38 ` Sebastian Roth
2005-02-04 12:25 ` administrator tootai
2005-02-03 17:06 ` administrator tootai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41FE4744.5010804@tootai.net \
--to=admin@tootai.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox